X-Tool F1 ULTRA COIN JIG - 40mm (Fits F1 & Fiber Lasers Also)

Description: FIVE COIN STEEL JIG - ALL-IN-ONE FITS ALL - has mounting holes to fit the following lasers: X-tool F1 (only 3 coins fit in this application) X-tool F1 ULTRA (5 coins) and FIBER Lasers (5 coins) (READ ALL SPECS BEFORE BUYING) Includes FREE TEMPLATES for ALL. It is designed for, tested on and BUILT SPECIFICALLY for the Xtool F1 bed AND F1 ULTRA laser bed, ALSO has extra holes for mounting on a FIBER LASER (if it has standard 25mm or 50mm bolt spacing - which is normally what a JPT or MOPA has)! So, if you own one, both or all - or will in the future - NO need to buy Another Jig! :-) Super Precise, Steel Laser Jig for Laser Engraving - 40mm Jig Size. Coins in photos are not included. **This item is Patent Pending. IMPORTANT NOTE ABOUT FITMENT: Due to this unit being able to accommodate all 3 different machines (and X-Tool not placing bolt holes exactly centered?) - this jig will sit SLIGHTLY OFF CENTER on X-Tool F1 Ultra beds - and will sit off to one side of the original F1 bed (see PHOTOS!) - however, our FREE templates assist proper placement. It is built SPECIFICALLY FOR F1, F1 ULTRA, and Fiber beds! WE TESTED ON THEM - and WE USE THEM - for DEEP, LENGTHY ENGRAVING. Pay Attention On Your Choice of Coins: Some of the cheaper blanks you find on Amazon, Ebay, or Etsy - that are slightly less than 40mm - about 39.90mm. They will work with this jig. But expect more play than the higher quality machined blanks - which is still mostly imperceptible!). **IMPORTANT - READ ALL BEFORE BUYING. For in-depth video preview - watch the instructional video link down below on this page... SOLID. FUNCTIONAL. EFFICIENT. This jig is 3mm thick steel. Will not melt, or burn like 3d printed - or wood jigs. IF you are deep engraving metal coins - you need this jig due to the heat. It also has a slot for picking the coin blanks out. 40mm Jig: Opening is exactly 40.2mm. So, check your actual coin diameter. This opening is a little over 40mm to precisely fit the more expensive coins that are exactly 40mm. This allows for EXACT placement without getting stuck during hotter engraves. WHAT'S INCLUDED: 1 Steel, 5 place, for 40mm Coins Jig. Holes fit 3mm (M3) for F1 beds; 4mm (M4) for Ultra beds ; and 6mm (M6) for Fiber (bolts are NOT included). But readily available at the hardware store or amazon. FREE TEMPLATE DOWNLOAD HERE >> for XCS and Lightburn: Download for free here - https://hotfabs.com/shop/ols/products/5coinjigfiledownload INSTRUCTION/PREVIEW VIDEO HERE >>> https://youtu.be/DJbPjJxWKro?si=uk13m8T9UtLupE4m Specifications: Laser Capacity Limits - *Xtool F1 bed is smaller and will ONLY fit 3 COINS; Xtool F1 Ultra fits 5 COINS; Fiber fits 5 COINS. Coin Size Opening - 40mm Jig: Exactly 40.2mm - (Real "40mm" blanks/coins will NOT slide around at all.) Bolt Opening Diameter - 3mm holes for the Xtool F1 bed, 4mm for the Ultra - PLUS 6mm holes to fit a Fiber Laser Beds! Bolt Spacing - Exactly spaced to fit the F1 & F1 Ultra beds & for the Fiber Lasers, the bolt spacing is 25.0 & 50.0mm center to center (verify yours!). Thickness - 3mm (.119) Material - Mild Steel Overall Width - 147mm Max Coin Width Spacing - 135mm (so a Fiber would be able to use either 150mm lens or 300mm lenses). Again, measure your coins. I am not responsible if you buy this and your coin is over 40.0mm-or if it is grossly under 40mm. This jig is GUARANTEED TO FIT (depending on the jig size you choose) the brass 40mm blanks from HeavyMetalBlanksCo here on Etsy. Those are the coins I designed the jig around. There will be some carbon marks & some tooling marks on these from production. Doesn't affect performance and each one is inspected and deburred where machines moved. Questions - please ask before buying. Before leaving a negative review - contact us! We can work it out! Thanks We also have single and double coin jigs on our website at HotFabs.com

Price: 43.17 USD

Location: Vancouver, Washington

End Time: 2024-10-27T15:12:43.000Z

Shipping Cost: N/A USD