Wireless 1CH Radio Receiver Kit MM53200, HT12, PIC Auto-Learning

Description: Wireless 1CH Radio Receiver Kit MM53200, HT12, PIC Auto-Learning The description of this item has been automatically translated. If you have any questions, please feel free to contact us. KIT 1CH wireless radio receiver coding MM53200, HT12, self-learning PIC MANUFACTURER: F.Elettronica REFERENCE: FT1111K EAN CODE: Small, low-cost single-channel receiver for MM53200 and HT-12 coding, with self-learning code function.Attention, the product is a KIT and therefore you will be given the components to be soldered with an electronics soldering iron and everything needed to recreate the device as shown in the image. The KIT includes easy-to-understand illustrated instructions in English. EXPERIENCE LEVEL NECESSARY medium-low Also available in assembled and ready-to-use version code FT1111M USEFUL LINKS: ITALIAN MANUAL Small low-cost single-channel receiver for MM53200 and HT-12 coding, with self-learning code function. The decoding and matching of the codes of the ten transmitters are entrusted to a Microchip microcontroller, whose firmware is able to adapt to the clock frequency of the encoder placed on the transmitter (provided it is 1.7 kHz, to synchronize with it and then extract the code to store it, or analyze it in order to control the relay output. IDEA OF USE: You can activate the receiver directly from a PC or Raspberry PI with our USB remote control code M-RF-CMD. This creates simple and complete wireless automation. Learning procedure Let's see how to learn the codes. Press and hold the SW1 button. The green LED (LD2) lights up to indicate that we are in self-learning and that from this moment we can transmit the code we intend to memorize. Press the button of the remote control you want to learn, and wait for the LED to flash rapidly three times, a sign that learning has been successful and that the procedure (at least if you have pressed and released SW1) is finished. If the LED remains solid, the memory is full or the code transmitted is invalid. Note that due to how the firmware works, the coding combination that sees all the TX encoder lines at low level is not allowed (you cannot keep all the dips in the ON state). Also note that by pressing SW1 you have 5 seconds available for transmitting and storing the code; by keeping SW1 pressed, instead of pressing and releasing it immediately, we can memorize up to 10 codes in sequence). Deletion procedure It is only possible to delete the entire memory and not just the remote control. Remove power from the device. Press the SW1 button and hold it down. Provide power. The green LED remains lit steadily for 2 seconds to indicate that the memory has been deleted. The green LED will flash 5 times to indicate exit from the procedure cancellation and normal start-up of the receiver. Technical specifications Coding: MM53200 and HT-12 Code self-learning: yes Number of codes that can be stored: 10 Drive: relay Power supply: 12 Vdc Absorption: 10 mA (with relay energized) Relay contact capacity: 1 A / 30 Vdc Dimensions (mm) : 39x30 Small low cost single-channel receiver for MM53200 and HT-12 encoding, with self-learning function of codes. The decoding and matching of the codes of the ten transmitters are entrusted to a microcontroller of the Microchip, whose firmware is able to adapt to the clock frequency of the encoder placed on the transmitter, as long as it is 1.7 kHz, to synchronize with it and then to extract the code to memorize it, or to analyze it in order to control the relay output. Learning procedure Let's see how to learn the codes. 1. Press and hold the SW1 button. 2. The green LED (LD2) turns on and indicates that it is self-learning and that from this moment we can transmit the code we intend to memorize. 3. Press the button of the radio control you want to learn, and wait for the LED to Flash rapidly three times, a sign that the learning has been successful and the procedure (at least if you have pressed and released SW1) is finished. If the LED remains steady, the memory is full or the transmitted code is invalid. Note that for how the firmware works, the encoding combination that sees all the TX encoder lines at low level is not allowed (you cannot keep all the dip switches in ON state). Also note that by pressing SW1 you have 5 seconds available for transmission and code storage; Press SW1, instead of pressing and releasing it immediately, we can store up to 10 codes in sequences). Cancellation procedure It is possible to delete only the entire memory and not just the radio control. 1. Remove power from the device. 2. Press the SW1 button and keep it pressed. 3. Supply power. 4. The green LED stays on for 2 seconds to indicate that the memory has been cleared. 5. The green LED will emit 5 flashes to indicate the cancellation procedure and normal start-up of the receiver. Technical specifications • Coding: MM53200 and HT-12 • Self-learning of codes: yes • Number of storable codes: 10 • Drive: one relay • Power supply: 12 Vdc • Absorption: 10 mA (with relay energized) • Relay contact capacity : 1 A / 30 Vdc • Dimensions (mm): 39x30 Why Mectronics STORE? All products are shipped via the best national couriers such as SDA, GLS, Poste Italiane, BRT and DHL. To facilitate delivery, you will be asked for your telephone number during the order phase, allowing the courier to contact you in the event of any problems or eventualities during delivery. For any delivery needs you can contact us. ALL SHIPMENTS ARE 100% TRACEABLE Not at home during the day? We have the possibility of delivering to the post office near your home or to a Puntoposte! Write the delivery point in the address. PAYMENT Credit cards are also accepted with transactions always made on the secure payment site PayPal. No information about your payment method is shared with us to ensure maximum security. A REGULAR TAX INVOICE IS ISSUED FOR THE PRODUCTS SOLD IF REQUESTED AT THE TIME OF PURCHASE. WITHDRAWAL AND WARRANTY All our products are guaranteed both upon delivery and during the time of use. For products that are originally defective, we will replace the product free of charge. The warranty lasts 2 years for private individuals and 1 year for companies/businesses. Remember to keep the sales invoice and the original product packaging with all accessories! If you are not satisfied with a product, you have 30 days to withdraw from the purchase and receive a refund for the purchase of the product. TECHNICAL ASSISTANCE What sets us apart from other sellers? We are an electronics company with technicians dedicated to solving your doubts or problems with our products. No waiting on the phone or call center: you can contact us by phone, whatsapp, email or fax, the references can be found at the bottom of the page. Our experience is at your service to help you choose and use the products on sale. FEEDBACK Feedback is important to us and to you. Therefore we ask you to report any problem in the purchase and to contact us before leaving negative or neutral feedback. Remember to put 5 stars in your feedback if possible in all fields to always guarantee the service we offer. As you can see, the way to contact us is clear and simple, to quickly solve all problems with our products. ELECTRONICS - HOME AUTOMATION - REMOTE CONTROL - AUTOMATION AND MECHANICS - SOFTWARE CREATIONS Prestalia e-commerce solutions. Attention, the product is a KIT and therefore you will be given the components to be soldered with an electronics soldering iron and everything needed to recreate the device as shown in the image. The KIT includes easy-to-understand illustrated instructions in English. EXPERIENCE LEVEL NECESSARY medium-low Also available in assembled and ready-to-use version code FT1111M USEFUL LINKS: ITALIAN MANUAL Small low-cost single-channel receiver for MM53200 and HT-12 coding, with self-learning code function. The decoding and matching of the codes of the ten transmitters are entrusted to a Microchip microcontroller, whose firmware is able to adapt to the clock frequency of the encoder placed on the transmitter (provided it is 1.7 kHz, to synchronize with it and then extract the code to store it, or MPN FT1111K Marca F.Elettronica EAN Non applicabile

Price: 93.44 USD

Location: Bagno di Piano

End Time: 2025-01-16T13:50:21.000Z

Shipping Cost: 0 USD