IN STOCK Whipple 3.0L Supercharger Complete Stage 2 Kit Mustang GT 5.0L 2018-23

Description: TRE Whipple Authorized Priority Dealer - All Whipple Products Available Visit our eBay Store for all other auctions or contact us and we can create a special listing for you! Click the "Contact seller" link next to our user name at the very top of the page to get our phone number. Whipple Supercharger System Details Shipping Payment Policies Contact This listing is for a BRAND NEW Whipple Intercooled Stage 2 Supercharger System with a Gen 5 3.0L blower setup for the 2018-2023 Ford Mustang GT 5.0L which will get you an astounding 825* flywheel HP and 640* foot pounds of torque on 93-octane gas! While Whipple broke many rules and records with its record setting S550 supercharger system, holding the title of the most powerful, most advanced supercharger system available, we weren't satisified and decided to build an all new supercharger from the ground up. The new, direct and port injected supercharger system features the brand new Generation 5 3.0L front feed twin-screw supercharger with all new bearings, gears, rotors and housing allow the new supercharger to spin faster, longer and safer while producing more power than any other positive displacement supercharger ever built. This also features all new patent pending triple intercooler design that has even more volume and surface area than the already massive Whipple Cooler that cooled the Ford Cobra Jets and all the record setting S550 Mustangs. Couple this with the industry's leading heat exchanger, water reservoir and intercooler pump, you get more power with lower boost levels and quicker recovery times after aggressive operation. The Stage 2 kit comes with everything in Stage 1 along with a 132mm throttle body, high flow fuel pump, more boost and a 300 rpm higher redline! This system is 100% complete, including Whipple's Gen 5 3.0L supercharger, high-flow fuel injectors, high flow 400LPH fuel pump, standard heat exchanger, a flash tool with a unique PCM calibration, and all the pre-formed & fitted hoses with all the necessary wiring connectors for a easy installation. The calibration is for stock trucks or those with a catback only, just bolt on and drive.50 State Legal for 2018-21 Mustang Whipple Part # WK-2625-STG2-30 There are many different options available from Whipple, please view the details section below for the details on this kit. Please contact us with questions or check our eBay Store for the many other Whipple Supercharger kits available, and options such as upgrading air inlet or polished head units. Details Wholesale Distribution available, contact us and we can create a special listing for you! WHAT TO EXPECT FROM THIS PRODUCT: These supercharger kits are the most complete available, including everything needed for installation. This includes all mounting brackets for the blower, pullies, belts, intercooler, all the tubing, piping, fittings and clamps and even oil for the self contained lubricating system. You do not need to make any major modifications or purchase special tools or other parts. Many customers install in their garage or driveway over a weekend. Specifications: Horsepower: 825+ Gen 5 W185RF 3.0L supercharger head unit, 10-11 psi, upgrades available Highly effective air-to-water intercooler Fuel Pump Supplied: High flow Deatschwerks 400LPH Fuel Pump Supplied Fuel Injectors Supplied: Genuine Bosch 55 lb/hr Dual Pattern Fuel Injectors Computer/Ignition Mods.: Tomahawk Flash Tool Supplied 132mm Roval Throttle Body included with the Stage 2 Kit The most power per pound of boost on the market! Easy and quick installation System is 100% complete with OEM quality and appearance New Gen 5 3/4 rotor design gives more power and will really shine the harder its pushed. Complete With All Necessary Parts & Hardware For Installation No Internal Modifications Required TREperformance is an Authorized Installing Dealer of Whipple Superchargers. Custom made and shipped direct from Whipple in 5-10 business days! With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM constantly monitors the engines torque output while monitoring many different parameters to keep the engine in it’s ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability. Each Whipple kit comes with unique software and a OBDII flash tool giving the customer the ability to flash/update whenever needed. Each customer also gets the new Flight Control Software, ability to adjust wheel/axle size, octane adjustment, crank/cam relearn and many other unique features. Each complete Whipple system comes with the IAT2 harness and sensor to properly monitor the delta between the incoming air and the compressed air after the intercoolers, this helps maximize power in all given enviornments. The 6-rib billet idler system features a billet spring loaded tensioner, billet idler pulleys and lightweight pocketed supercharger pulley. The 6-rib can easily be upgraded to a 10-rib with the optional 10-rib system. Each system comes with an adjustable idler pulley to allow variance in SC pulleys with minimal belt length changes. The massive 150mm Roval inlet allows for nearly any throttle body to be run, 80mm stock, 132mm or 150mm throttle bodies. The Whipple Advantage The Whipple Advantage is designed into every Whipple SC system. This advantage is broken down into 5 categories during the design and testing phases which truly sets Whipple apart from others: 1. Best power for money. 2. Most complete package. 3. Maximum power. 4. Maximum power expandability. 5. Aesthetic appeal. What does this mean? You get it all, in one package. Massive power gains with the biggest superchargers, biggest intercoolers, biggest intercooler systems, biggest air-inlet systems while providing robust belt systems and heavy-duty spring tensioners. The intake manifold is designed with high velocity in mind, while increasing plenum volume to lower pressure loss at high power applications. You then get OEM style fuel and vacuum hoses with nylon sheaving for added protection and appeal, OEM style quick connect fittings with billet aluminum fittings. No ugly brass fittings hanging off the inlet like some others. Wire extensions are injection molded to allow simple plug-and-play installations. Each system also has multiple options for increased performance such as oversized heat-exchangers with dual fans, billet high flow throttle bodies, oversized cold air intake systems just to name a few. Each kit comes with step-by-step instruction manuals printed in color to help all installers, including the do-it-yourselfer. Kits come with all the fasteners, all color matched for proper aesthetic appeal. So don’t be fooled by others, there is no comparing to the Whipple supercharger systems, simply the top of the line packages designed and built to exceed all expectations. Whipple's Superior Engineering Leaving no stone unturned, Whipple's revolutionary system for the Ford 5.0L Coyote engines is truly resetting the standards of supercharging. With its massive front feed inlet, typical inlet inefficiencies are a thing of the past. Featuring the all new ground breaking, Gen 5 inverted supercharger with the triple intercooler technology. Other positive displacement superchargers sacrificed plenum volume and runner size while Whipple engineer's used every square inch available to open the volume of the manifold, allowing for future expansion of power levels. Small runner and small volume manifolds cause excess boost "build-up" giving you manifold pressure, not proper cylinder pressure. This results in high boost, low power scenario's with excess heat from the lack of proper flowing air volume. Whipple didn't just stop there, knowing that the Coyote motors love boost, Whipple’s team squeezed in not one, but three high density intercooler cores featuring variable thickness to maximize airflow and cooling capacity. The triple coolers allow for maximum surface area to promote equal distribution and increased cooling. Cooler air equals denser air which equals more power at each boost level while being safer on engine components. The bigger intercooler alone wasn’t enough, in previous generations, the supercharger discharge was typically too far forward from the intercooler core, and sandwiched so close to the core on top that the core’s surface area was not properly utilized. With the new 3.0L Gen 5, Whipple was able to increase the volume and distance above the intercooler core, as well as doing the same below. This issue, like some of our competition, increases the “boost” in the manifold, but not at the valves and combustion chamber. This means high boost, low power and high discharge temps. Whipple’s front feed system has a rear discharge port at nearly the center of the IC core. Through countless CFD analysis, Whipple’s design utilizes nearly the entire intercooler core, resulting in less pressure drop and cooler temps for increased power levels. Another great feature to the Whipple Coyote kits is the optional oversized heat exchanger, nearly 150% more volume than the competition, oversized aluminum intercooler reservoir and optional dual fan kit. The oversized heat exchanger is nearly the size of the engine radiator, giving incredible cooling capacity for daily driving, drag racing or road racing. Get the dual Spal fan kit option and increase the airflow over the heat exchanger. The Whipple oversized aluminum reservoir is again a unique feature included with every kit. The aluminum reservoir is remote mounted in the driver side inner fender, keeping it in the cool area away from engine heat, along with having over 1.2 gallons of capacity in the reservoir alone! Giving the intercooler system well over 2 gallons of capacity. This means cooler air temps, less heat soak and more power! Whipple Fuel System The Whipple S550 Mustang system uses genuine Bosch 55lb/hr (@ 3 bar) dual spray pattern fuel injectors and billet fuel rails, 156% larger than stock 17lb/hr. Every fuel line and rubber hose is emissions compliant and features quick connect style for simple installation. Each injector is pre-tested and flow matched. No other fuel system mods are required. The factory fuel pump is replaced with the DW400 which features 400LPH, 56% more capacity than the stock fuel pump, allowing for proper flow capacity in all conditions. Full System Specifications: Largest intercooler system on the market, featuring patent pending triple core technology Billet 132mm high flow throttle pre-set with factory electronics No other upgrades required, just massive power right out of the box Front entry Gen 5 W185ax (3.0 liters/3000cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.3L and 2.65L roots-type systems Gen 5 supercharger features new 3x4 rotor combination for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing 3.0L is 13% larger than 2.65L roots-type allowing lower power draw and lower discharge temps to flow the same amount of air (more power to the rear wheels) Oversized Crusher™ 150mm inlet for maximum airflow capacity and minimal rotor cavitation Inverted design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas Patent pending triple intercooler technology with massive dual 1" inlet port capacity Massive air-to-water aluminum bar-plate intercoolers (over 55% larger than some competition) offer more cooling than any other positive displacement system available, nothing comes close Massive oversized aluminum intercooler reservoir (over 2 gallons) holds more than double any competitors IC water system allowing longer more consistent power levels vs. competition High flow intercooler pump, nearly double the flow of the standard units others use Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy Included OBDII flash tool, new Tomahawk flash tool with the new Flight Control technology Tomahawk allows wheel/tire axle changes (a Whipple exclusive) 55 lb/hr dual pattern fuel injectors vs stock 17lb/hr stock injectors Exclusive 3x4 rotor combo for significant increase in airflow under the curve than less efficient 4x4 roots Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core More boost at the "hit" than any other twin-screw Flat torque curve for incredible acceleration High flow fuel pump replaces stock pump Fits under factory hood with no modifications No cutting or grinding on the engine block No cutting or grinding the K-brace No internal modifications required Kits come complete with all necessary parts and hardware for installation Plug and play wiring with male and female connections Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system Optional 10-rib belt system with matching 6061 T6 billet pulleys OEM quick connect fittings for easy installation Complete kits and competition kits are available Available in wrinkle black, polish, Ford textured blue or any custom color Easily upgradeable with bigger throttle body (132mm or 150mm Roval elliptical), dual electric Spal 11" high speed fans, optional supercharger pulleys Instant boost at the touch of the throttle 3 minute pulley changes Easy belt changes Lightweight pocketed 6061 T6 billet aluminum SC pulley Iridium spark plugs included We have Whipple supercharger systems to fit almost every performance application! Check out our eBay Store or click the "Contact seller" link next to our user name at the very top of the page to get our phone number. dsff Shipping -IN STOCK ITEMS- Ship no later than the second business day after receiving cleared payment. Pay by 12pm PST and most orders will have SAME DAY SHIPPING! Due to PayPal and Credit Card policies any item or combination of items valued over $250 requires a signature for delivery. All items paid with PayPal must ship to the address in the shipping address field in your payment details as required by PayPal. If there are any issues fulfilling your order we will contact you and offer a full refund if there will be more than 5 days until shipping. Any item paid for with an echeck through PayPal will not ship until the money clears, typically 3-5 business days. We observe all major holidays; please contact us before bidding if you are unsure of when your item will ship. Domestic Shipping Options (Please note that day one is the day after the item ships): -UPS Ground- 1-7 days. Check at www.ups.com for your location. -USPS Priority Mail- 1-4 days but no detailed tracking with this service. -USPS Express Mail- 1-3 days and more detailed tracking than priority. -UPS Next Day Guaranteed- Order by 12pm Pacific Time to ship the same day for next day guaranteed delivery! UPS Ground and USPS Priority Mail do not have a guaranteed shipping timeframe. If you need your item ASAP in a guaranteed number of days we highly recommend upgrading to USPS Express Mail or UPS Next Day. International Shipping Services: -USPS Priority Mail- 6-10 days typical delivery time, but as long as one month on rare occasions. BUYER BEWARE - NO TRACKING with this service. -USPS Express Mail- HIGHLY RECOMMENDED 3-5 days typical delivery time with tracking, but as long as 2-3 weeks on rare occasions. -USPS Global Express Guaranteed- 1-3 days GUARANTEED! (Most Countries, check USPS.com) If available, this shipping service is listed in eBay auctions as "Expedited Int'l Flat Rate Shipping" Since USPS Priority Mail International does not have tracking we strongly recommend upgrading international shipping to USPS Express Mail or to USPS Global Express Guaranteed. International Information: We will ship any part from any auction to anywhere in the world! All customs fees are paid by the receiver. Please research your customs fees with your local government before ordering so you know what to expect to pay once the shipment arrives. We do not lower invoice values since it is a violation of US and International custom laws. All international shipments are shipped with the correct value for the parts shipped. Payment Credit card payments can be made by directly calling, use the "Contact seller" link next to our user name at the very top of the page to get our phone number. Due to new eBay policies, sellers are no longer allowed to accept any other method of payment for eBay items besides credit card, debit card or paypal. This means that TREperformance is not allowed to accept other payment methods for any item purchased through eBay. It is always acceptable to visit our store in person to make payment and pickup your item at: TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627 Policies RETURNS AND EXCHANGES: We accept returns of unused, uninstalled, brand new goods, but we must charge a restocking fee of 20% to cover the costs we incur from eBay, Paypal, shipping, labor, etc. We also must charge a 20% restocking fee on any order which is cancelled after payment has been received, even if that order has not shipped. This is also to help cover the fees associated with eBay, PayPal, order processing, restocking, etc. If you would like to return or exchange an item please email us with your paypal or authorize.net transaction id # and the reason for the return or exchange. No returns are accepted without an RMA number which is given to the customer by TREperformance via email. Always have the RMA number clearly written on multiple sides of the package when you return the item. If it is not clearly written on multiple sides of the box it may be returned to sender. All returns must be received within 30 days of purchase. ACCEPTANCE OF TERMS: Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability from any and all claims arising out of Buyer's use, sale, or other distribution of this item. No refunds will be given unless the buyer receives prior written approval from TREperformance, and no repairs will be provided, nor labor charges covered by TREperformance in any situation. Seller reserves the right not to sell to bidders with excessive negative or "0" feedback. Contact Contact info: Email Anytime Call us by clicking the "Contact seller" link next to our user name at the very top of the page to get our phone number Phone and Storefront Hours: Monday - Friday 8:00 AM - 4:00 PM PST Mailing, Shipping & Storefront Address: TREperformance 1725 Monrovia Ave. Suite D7 Costa Mesa, CA 92627

Price: 9295 USD

Location: Costa Mesa, California

End Time: 2024-08-17T18:23:40.000Z

Shipping Cost: 0 USD