Description: WCH-Link (WCH-Link-R1-1v1)The WCH-Link module can be used for online debugging and downloading of WCH RISC-V MCU, and also for online debugging and downloading for ARM MCU with SWD interface. Through its USB2.0 full-speed interface, it can be connected to a computer host. It is plug and play. Connected to target chips by the debugging interface, it can be used for debugging and programming.WCH-LinkE (WCH-LinkE-R0-1v3)The WCH-LinkE module can be used for online debugging and downloading of WCH RISC-V architecture MCU, and can also be used for online debugging and downloading for ARM chips with SWD/JTAG interface. A JTAG interface is provided to support four-wire connection (TMS line, TCK line, TDI line and TDO line) to extend the JTAG interface for a computer to operate CPU, DSP, FPGA, CPLD and other devices. Through its USB2.0 full-speed interface, it can be connected to a computer host. It is plug and play. Connected to target chips by the debugging interface, it can be used for debugging and programming.WCH-DAPLink (WCH-DAPLink-R0-2v0)The WCH-DAPLink module can be used for online debugging and downloading for ARM chips with SWD/JTAG interface. It supports two modes, i.e. ARM mode-WINUSB device and ARM mode-HID device. Through its USB2.0 full-speed interface, it can be connected to a computer host. It is plug and play. Connected to target chips by the debugging interface, it can be used for debugging and programming.WCH-LinkW (WCH-LinkW-R0-1v1)The WCH-LinkW module is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V architecture MCU and also for online debugging and downloading for ARM chips with SWD/JTAG interface.Features:- Two 3.3V/5V power supply outputs are supported- Supports USB to TTL serial port function- Supports RISC-V chip single-wire/dual-wire downloading and debugging- Supports downloading and debugging for ARM kernel MCU with SWD/JTAG interface- Supports automatic firmware detection and upgrade- 3.3V/5V output power supply is controllable- Automatic power-off protection- Red and blue LED indicator lights make it easy to check the working status- Supports a host computer to switch working mode via one keySpecifications:Default parameters of serial port:- Data bit: 8- Stop bit: 1- Check digit: None- Flow Control: None- WCH-Link supports baud rates: 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200 and 230400bps- WCH-LinkE/WCH-DAPLink/WCH-LinkW supports baud rates: 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 230400, 460800 and 921600bpsProduct size:- Size: 73 x 24 x 14mm/2.9 x 0.9 x 0.6"Package Included:- 1 x Programmer
Price: 11.39 USD
Location: ShenZhen
End Time: 2024-08-22T05:48:45.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Unbranded
MPN: Does not apply
Type: ELECTRONICS COMPONENT
Model: ELECTRONICS COMPONENT
