Waveshare ESP32-S3 4.3inch Touch LCD Development Board Type B 32-bit LX7 800x480

Description: Description ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard AntennaESP32-S3-Touch-LCD-4.3BIntegrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces Version OptionsESP32-S3-Touch-LCD-4.3BStandard version, without case ESP32-S3-Touch-LCD-4.3B-BOXWith plastic caseFeaturesESP32-S3-Touch-LCD-4.3B is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applicationsEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaBuilt in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAMOnboard 4.3inch capacitive touch display, 800×480 resolution, 65K colorSupports capacitive touch control via I2C interface, 5-point touch with interrupt supportOnboard voltage regulator, supports 7~36V wide range power supplyOnboard RTC chip and rechargeable battery to ensure time data is not lost when power lossOnboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.Supports passive and active digital input, with bi-directional optocoupler isolationSupports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking currentOnboard LED indicators for indicating the power and battery recharging statusSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenariosApplication ScenariosIPS Display PanelExcellent display performance, 160° wide viewing angleCapacitive 5-point touchsupports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interactionSupports multiple peripheralsSupports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfacesSupports Two wiring methodsComes with two types of screw terminals, allowing for bottom or back wiring, which is more convenient to integrate into various application scenarios such as DIN rail or embedded devicesBottom Wiring Back Wiring Back WiringNote: the case version does not support bottom wiring.What's On BoardESP32-S3-WROOM-1-N16R8The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB FlashTF card slotUSB Type-C portBOOT buttonPress and hold while powering on for program burningRESET buttonOptocoupler isolationTouch panel connector4.3inch display panel connectorRS485 and CAN terminal resistors selectionclose by defaultBattery power supply ON/OFF3.7V single lithium battery GH1.25 headerStatus IndicatorsDONE: Lithium battery charging completed indicatorCHG: Lithium battery charging indicatorPWR: Power supply indicator(the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF) 7-36V DC power supply terminalI2C interface terminalVOUT pin output 5V/3.3V (switching by onboard resistor)CAN interface terminalRS485 interface terminalDigital output5~36V, open-drain output, output load: 450mA per channel (MAX)Input signal common terminalNC: dry contact passive inputConnect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DCConnect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DCDigital input5~36V, supports passive / active input (NPN or PNP)optional for dedicated plastic case Supports installing 60x30x6mm (LxWxH) lithium battery * for reference only, the lithium battery is NOT included.multiple installation methods * for reference only, the rail bracket, wall bracket and monitor arm are not included.The mounting hole spacing on the back of the case is 75mm.Support Batch CustomizationSupport software and hardware customizationIncluding hardware interface, LOGO, label, case and web page, etc.outline dimensions Package Content Weight: 0.115 kgESP32-S3-Touch-LCD-4.3BESP32-S3-Touch-LCD-4.3B (with back wiring 16PIN screw terminal) x116PIN screw terminal for bottom wiring ×112ESP32-S3-Touch-LCD-4.3B-BOXESP32-S3-Touch-LCD-4.3B-BOX x1

Price: 45.57 USD

Location: Shenzhen

End Time: 2024-09-13T10:49:26.000Z

Shipping Cost: 0 USD