Description: Vintage Watchmakers Crystal Lathe Up for your consideration is this vintage Watchmakers Crystle Lathe. The device is made of heavy cast brass and crank handle sleeve is made of bakelite. The round brass back cutting plate is 4.25" in diameter, the device is just about 6" at its highest point, about 7" deep (from tip of handle to end of cutter adjustement knob), and about 6.5" wide. It is believe this device dates back to the later 1800's. The device functions without any issues, all worm gears and screws work without issue. The device has not been lubricated, it it were to be used lubricating the gearage would be recommended. The device has a 'caliper' device built in to adjust for size of the bezel you are cutting to get an accurate crystal fitment. The cutter / scorer is still present and appears to be in good condition. The device is in very good shape and only light wear can be seen on the cutting backplate where previous crystals were cut. This is a very high quality / heavy duty crystal lathe. We attempt to take the most detailed photos as possible to show the most accurate and true condition of our items.PaymentWe accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! ShippingWe ship and pack professionally and within 24 hours of the auction ending. Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it two to three days after shipment (Current USPS transit times) Returns Items are sold AS IS and returns are not accepted. Items are described with every detail possible to show the true and accurate condition. If you have any questions please feel to contact us and we will be happy to respond.Up for your consideration is this vintage Watchmakers Crystle Lathe. The device is made of heavy cast brass and crank handle sleeve is made of bakelite. The round brass back cutting plate is 4.25" in diameter, the device is just about 6" at its highest point, about 7" deep (from tip of handle to end of cutter adjustement knob), and about 6.5" wide. It is believe this device dates back to the later 1800's. The device functions without any issues, all worm gears and screws work without issue. The device has not been lubricated, it it were to be used lubricating the gearage would be recommended. The device has a 'caliper' device built in to adjust for size of the bezel you are cutting to get an accurate crystal fitment. The cutter / scorer is still present and appears to be in good condition. The device is in very good shape and only light wear can be seen on the cutting backplate where previous crystals were cut. This is a very high quality / heavy duty crystal lathe. We attempt to take the most detailed photos as possible to show the most accurate and true condition of our items. Vintage Watchmakers Crystal Lathe Up for your consideration is this vintage Watchmakers Crystle Lathe. The device is made of heavy cast brass and crank handle sleeve is made of bakelite. The round brass back cutting plate is 4.25" in diameter, the device is just about 6" at its highest point, about 7" deep (from tip of handle to end of cutter adjustement knob), and about 6.5" wide. It is believe this device dates back to the later 1800's. The device functions without any issues, all worm gears and screws work without issue. The device has not been lubricated, it it were to be used lubricating the gearage would be recommended. The device has a 'caliper' device built in to adjust for size of the bezel you are cutting to get an accurate crystal fitment. The cutter / scorer is still present and appears to be in good condition. The device is in very good shape and only light wear can be seen on the cutting backplate where previous crystals were cut. This is a very high quality / heavy duty crystal lathe. We attempt to take the most detailed photos as possible to show the most accurate and true condition of our items.PaymentWe accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! ShippingWe ship and pack professionally and within 24 hours of the auction ending. Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it two to three days after shipment (Current USPS transit times) Returns Items are sold AS IS and returns are not accepted. Items are described with every detail possible to show the true and accurate condition. If you have any questions please feel to contact us and we will be happy to respond. Up for your consideration is this vintage Watchmakers Crystle Lathe. The device is made of heavy cast brass and crank handle sleeve is made of bakelite. The round brass back cutting plate is 4.25" in diameter, the device is just about 6" at its highest point, about 7" deep (from tip of handle to end of cutter adjustement knob), and about 6.5" wide. It is believe this device dates back to the later 1800's. The device functions without any issues, all worm gears and screws work without issue. The device has not been lubricated, it it were to be used lubricating the gearage would be recommended. The device has a 'caliper' device built in to adjust for size of the bezel you are cutting to get an accurate crystal fitment. The cutter / scorer is still present and appears to be in good condition. The device is in very good shape and only light wear can be seen on the cutting backplate where previous crystals were cut. This is a very high quality / heavy duty crystal lathe. We attempt to take the most detailed photos as possible to show the most accurate and true condition of our items.
Price: 475 USD
Location: Chagrin Falls, Ohio
End Time: 2025-01-03T17:53:36.000Z
Shipping Cost: 21.9 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Brand: Unbranded
