USR-TCP232-306 Ethernet Converters RS422/RS232/RS485 Support DNS DHCP Webpage

Description: USR-TCP232-306 Ethernet Converters RS422/RS232/RS485 Serial to Ethernet Support DNS DHCP Buit-in WebpageIntroductionUSR-TCP232-306 is a multi serial port server,whose function is to realize bi-directional transparent transmission between RS232/RS485/RS422 and Ethernet. User can directly process data interaction through network and device to realize remote data acquisition, remote control and management.FeaturesAuto-MDI/MDIX, RJ45 port with 10/100MbpsWork mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD ClientBaud rate of serial port can be configured from 600 bps to 230.4 Kbps, supports check bit of none, odd, even, mark and spaceHeartbeat package mechanism to ensure connection is reliable, put an end to dead linkUser-defined registration package mechanism, check connection status and use as custom packet headerSupports RS232/RS485/RS422 port ( Can't be used at one time)Under TCP Server Mode, the connection number with client can be randomly set from 1 to 16, default number is 4. IP has been connected can be shown according to connectiong with calculating send / recceive dat.When connection number reaches a maximun, the new connection is kicked off the old one can be configured by userParameters can be configured by built-in webpage, AT command, serial port procotol and network procotol. Setting procotol is avaliable to integrate into user's software.Supports TCP client short connection function, user-defined the disconnected time.Device restart if no data transmission or timeout. User-defined the restart time.If data buffer needs to clear configuration before TCP connection establishmentSupports DHCP, automatically obtain an IP address and query IP address via serial setting protocol.The global unique MAC address, user-defined MAC addressDNS functionDNS server addres can be definedFirmware can be upgraded by networkProvide Virtual com softwareRestore factory setting through software or hardwareRunning across the gateway, switches or routers.Can work in LAN, also can work in the InternetApplication FieldIndustrial data transmission, industrial automationsecurity and protection monitoring, public securitySmart home, power control, environmental monitoring, intelligent agricultureDoor check on work attendance system, POS system, rice selling systemBuilding automation system, power monitoring, self-service banking system, telecom machine room monitoringApplication Simple Transparent transmissionTransparent transmission means that whatever is transferred, our device plays the role of a channel and sends data to the target without modification. On-site monitoring equipment sends data to Serial Device Servers transparent data transmission terminal by itself port, the terminal CUP receives data by serial port and package data.Various parameter setting methodSoftware SettingsDownload settings software, search related Serial Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default.Web-page Settings Open your browser and inter the default IP address of the Serial Device Servers.Open the login page of Serial Server, Enter the user name and password (default admin).After setting parameter, Click Save and Restart, then setting will take effect.Serial AT commands SettingsUser can set parameter by module itself without going through another computer to configure. This setting method is used in the following situation: user have to configure IP address and destination IP address on site. AT command can meet the demand. After MCU connects serial server module by TTL (UART), MCU can configure setting by AT command. Hardware Work VoltDC 5.0～36.0 VWork Current116mA@5V/53mA@12VEthernet Port10/100Mbps auto switch between cross and direct connectionBaud rate600-230.4K bpsSerial PortRS232*1 / RS485*1 / RS422*1Can't be used at one timeSoftware Network ProtocolIP, TCP/UDP, ARP, ICMP, IPV4IP ModeStatic IP, DHCPDNSUser-defined DNS server addressConfigureSoftware/Webpage/AT commandWork ModeTCP Server/TCP Client/UDP Server/UDP Client

Price: 34.17 USD

Location: Shenzhen

End Time: 2024-10-14T06:56:23.000Z

Shipping Cost: 0 USD