Description: USB Power Puck for Bambu Lab 3D PrintersThe Power Puck works with Bambu Lab printers including the X1, X1C, P1S, P1P and AMS Fully assembled circuit ready to supply two 5 volt USB ports to your existing 3D printer.approx. size: 1-3/4"L x 1-3/4"W x 5/8”H – 9” power cable with FREE Mystery GiftWhat use is this adapter? The Bambu printers and AMS systems do not come with any type of USB ports and there isn't a simple way to just tap into the power source of the 3D printer or AMS to operate additional LED lighting and/or other devices that you may like to use. The only way to get power would be to run other power wires from other power sources which means more wall outlets, wires, cords and transformers to deal with.The Power Puck solves this problem by simply tapping into the voltage of the printer or AMS unit.Is the Power Puck safe to use on my printer or AMS? Absolutely! The Power Puck has been designed with modern day technology. The Puck takes higher voltage from your printer or AMS and reduces it down to a very safe 5 volts with two USB outlets for your use.The Puck is 98% efficient which means near zero wasted energy and enhanced heat reduction.Thousands of hours of testing on Bambu printers and AMS units. Does using the Power Puck void my warranty with Bambu Lab? Just like most companies today including Bambu Lab, they frown upon people or companies making or selling add-on devices for their equipment. So they blankly reject any type of add-on devices unless the device is manufactured by their company. So yes, if they knew, it would be an excuse to deny warranty.In reality;The Power Puck uses a very low amount of power from the printer or AMS connector port. This very small amount of power is not going to hurt or alter the power needs of the 3D printing systems in any way.How do I attach the Power Puck to my printer or AMS? *The Power Puck should only be attached to the printer or AMS when the main power to the system is off.If you do not have an AMS, just connect the Power Puck to the vacant six pin connector on the back of the 3D printer.If you are using a printer with one or more AMS attached, connect the Power Puck to the vacant six pin connector on the last AMS unit. Features:Small and compact size with a long 9” connecting wire.Blue non-obtrusive indicator light. (visible through USB ports only)Four powerful 8mm rare-earth magnets to attach it firmly to the metal of the Bambu Lab printer.Two 5 volt USB ports for additional lighting, exhaust fans, charging ports and the like.**Maximum ampere draw is 2.5 amps combined total at 5 volts DC on the USB ports . FREE Shipping and HandlingWe will not ship to P.O. boxes or OverseasShipping to the USA 48 States Only!We ship VERY PROMPTLY via USPS Mail.I prefer PAYPAL transactions
Price: 25 USD
Location: Kemp, Texas
End Time: 2024-09-12T21:49:55.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Power Supply