Description: The USA Lab 20L RE-1020 Series Rotary Evaporator Turnkey Kit recovers solvents efficiently and fast. This Kit provides consistent and repeatable results at an affordable price. The RE-1020 Evaporator is made with GG-17 High Borosilicate Glass, and has been designed for efficient use of surface area. This means faster recovery without compromising quality. Our evaporators come standard with safety features such as over-temperature shut off and dry-run protection. All valves and ports are high efficiency allowing a continuous feed of material as well as draining the receiving flask without breaking vacuum. This kit includes a Vacuubrand MD 4C NT 2.2CFM Diaphragm pump that is rated for 15,000 Hours of use before maintenance. This pump is made from the highest quality parts and will work great with a USA Lab 2L rotary evaporator system. No expense has been spared with these evaporators, yet we crush the market on pricing to provide great value at a low cost. Our evaporators are the best value on the market and each one comes with fantastic customer service, local product support and a 1 year warranty. RE-1020 Specifications Glass Material GG-17 Borosilicate Glass Evaporation Flask Capacity 20L Collection Flask Capacity 10L Rotary Speed 20-120RPM Bath Temperature Range Room Temp to 180°C (356°F) Lifting Mechanism Electric Power Requirements 220-240V 60Hz 30A Single Phase 5000W L6-30P Plug Installed Temperature Control Accuracy +/-1°C Motor Wattage 100W Heater BTUs 17,000BTU Achievable Vacuum 399.9Pa Evaporating Capability Water≥5L/H Alcohol≥12L/H Water Bath Volume 41L Dimensions 43"L x 30"W x 80"H Condensing Glass Volume Main: 0.8m² Auxiliary: 0.39m² Speed Regulation Digital Step-Less Vacuum Barb 13.3mm Condenser Barb 15.5mm RE-1020 Packing List Item Quantity 20L RE-1020 Rotary Evaporator Base 1 set Main Condenser 1 pc Auxiliary Condenser 1 pc 20L Boiling Flask 1 pc 10L Receiving Flask 1 pc Three-Way Bump Trap 1 pc Vapor Duct with Seal (Pre-Installed) 1 pc PTFE Vacuum Sealing Kit (Pre-Installed) 1 pc Glass Vacuum Port with PTFE Valve 4 sets Glass Feeding Tube with PTFE Valve 2 sets PTFE Feeding Tube with Extension Hose 1 pc Vertical Stand 1 pc Vacuum Gauge 1 pc Support Ring 2 pcs Rubber Strap for Condenser 1 pc Clamp with PTFE Gasket 7 sets Evaporator Flask Screw Aid 1 pc Allen Key 2 pcs 32A Fuse 1 pc Screw Nuts for Clamps 2pcs Spring for Clamps 2 pcs Gasket for Clamps 4 sets 3oz. Vacuum Grease 1 pc Vacuum Hose 10ft UC-30/30 SPECIFICATIONS Model UC-3030 Reservoir Capacity 30L Reservoir Dimensions 13.7" x 13.7" Temperature Range Room Temperature to -30°C / -22°F Power Requirements 220-240V 60Hz 20A 1800W Single Phase Refrigerating BTUs 4,000BTU - 13,500BTU Circulating Pump Wattage 100W Temperature Accuracy +/- 0.5°C Pump Flow 30L/Min Pump Pressure 2.2bar Barb Size 5/8" Refrigerant R404 Dimensions 30.3" x 25.5" x 39.7" Weight 171lbs UC-30/30 Packing List USA Lab UC-30/30 Chiller 1 pc 5/8" Insulated Tubing 11ft 5/8" Barbed Valve 1 pc PTFE Sealing Tape 1 pc MD 4C NT Three-Stage Chemistry-Design Diaphragm Pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet even challenging requirements. The three-stage design provides the advantageous combination of high pumping speed and very low ultimate vacuum. All parts of the MD 4C NT in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. Due to the gas ballast valve and its very good ultimate vacuum (even with gas ballast) the MD 4C NT is also suitable for pumping condensable vapors of high-boiling solvents. The NT-series features further improved performance data, easy service and superior vapor tolerance. Performance Features Outstanding chemical resistance and superior vapor tolerance Exceptionally high performance even at low vacuum Excellent ultimate vacuum even with gas ballast Whisper quiet and very low vibration Long diaphragm life, maintenance-free drive system Technical Data Technical data MD 4C NT Number Of Heads / Stages 4 / 3 Max. Pumping Speed At 50/60 Hz 3.4 / 3.8 m3/h Max. Pumping Speed At 50/60 Hz 2.0 / 2.2 cfm Ultimate Vacuum (Abs.) 1.5 / 1.1 mbar/torr Ultim. Vac. (Abs.) With Gas Ballast 3 / 2.2 mbar/torr Ambient Temperature Range (Operation) (10°C) - (40°C) Ambient Temperature Range (Storage) (-10°C) - (60°C) Max. Back Pressure (Abs.) 1.1 bar Inlet Connection Hose nozzle DN 8-10 mm Outlet Connection Hose nozzle DN 8-10 mm Rated Motor Power 0.25 kW Rated Motor Speed At 50/60 Hz 1500/1800 min-1 Degree Of Protection IP 40 Dimensions (L X W X H) 325 x 243 x 198 mm Weight 14.3kg Noise Level At 50 Hz, Typ. 45 Dba NRTL Certification Canada and the USA Atex Conformity (Only 230V) II 3/- G IIC T3 X Internal Atm. only Items Supplied Pump completely mounted, ready for use, with manual Accessories Rubber Vacuum Tubing DN 8 mm (20686001) MD 4C NT - Pumping Speed Graph at 50 Hz MD 4C NT - Pump Down Graph at 50 Hz (10L volume) MD 4C NT - Pumping Speed Graph at 60 Hz MD 4C NT - Pump Down Graph at 60 Hz (10L volume) -Technical data are subject to change without notice- MD 4C NT - Dimension Sheet Extra Packing List USA Lab Propylene Glycol 4 Gal 3/8" Vacuum Hose 10ft We ship all glassware products with additional care, but sometimes they arrive broken. If glassware arrives broken, please contact us within 3 days of receiving your product and we will either send you a brand new piece or send you a refund! Any glassware broken after delivery voids all warranties. Thank you for understanding! 1 Year Parts and Labor Warranty Included, Glassware Not Included. For Technical Support, Questions, or Other Issues Please Email or Call Us!
Price: 14849 USD
Location: San Diego, California
End Time: 2024-10-12T19:58:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Brand: UnBranded
