Universal Motorcycle Rear Brake Stop Light Switch Spring Monkey Bikes Z50 SW02

Description: Excellent Product: Keeping you and the road around you lit up has never been more important while out riding, you want to be sure that your brake lights work reliably! Here's a durable, universal drum brake switch spring kit that'll do just the job! Make your bike safer and more reliable with this high-quality, universal brake switch spring kit.Your Best Choice: Universal motorcycle rear brake light switch + spring kit is a direct replacement for most brake pedal switches. It fits most Motorcycles that use a 2 wire system, and a threads switch. The wiring length is about 12". In some cases, you will need to extend the wiring length to match your original switch, but at the price of these vs an OEM switch, it's well worth buying.Fitment: Universally fit for more motorcycles, from Classic Bikes to Super Bikes, Pit Bikes to Quad Bikes / ATVs, Dirt Bikes, Monkey Bikes, Scooters, and more! Greatly fit for Honda Z50, Z 50, Z-50, Z50A, etc.; fit for Honda GL / CB / CT / SL / CA / CL / VF / VT / XL / XR etc.; fit for Kawasaki/NINJA, GPZ500, GPZ 500, etc.; fit for Suzuki GS400, GS 400, GS-400, GS500, etc.; fit for Yamaha/Virago, Maxim, XJ, XS, XV, etc.Simple Installation: An easy replacement brake switch spring kit for most drum brake systems is supplied with a spring that can be cut down to size. Easy to install, no instructions required.Product Specifications: Material: ABS Housing, Steel Spring & SwitchSwitch Length: 2.5"Wiring Length: about 12"Installation Notes: Before beginning work, disconnect the negative battery terminal. Remove the bolts securing your right rear set.Do a side-by-side comparison of the new switch to the old switch and be sure it will work for your application.Take note of the position of the old switch and place a mark or tape where the tip is while not extended.Remove the spring from your brake pedal and then remove the switch from the mount.To install the new switch, first, place the threaded anchor into the mount on the rear set.Next, thread the switch into the anchor until it is seated at the proper distance.(The tip of the new switch should nearly match up with the mark you placed before.Some variation is normal and any slack can be taken up by sizing the spring) Next, using your old spring as a guide, gently bend the ends of the new spring and attach one end to the switch, and the other to the brake pedal.Now connect the wires to your bike wiring. It may be necessary to splice in connectors deep.

Price: 5.48 USD

Location: Ontario, California

End Time: 2025-01-31T12:10:40.000Z

Shipping Cost: 1.49 USD