Turbo System Leakage Tester Cooling System Hose Turbo Boost Engine Leak Tester

Description: Why Need This Tester Kit? Turbo System Charger Leakage Tester Kit will help you charge the turbo system with a low pressure of regulated workshop mains air supply, check and locate the leakage on the turbo systems on various vehicles, save your valuable time and money. Works on most turbo systems of cars & light trucks, and also cooling system hoses. Please check the Sizes of 4 Pairs of Stepped Adapters: 35, 40, 45 mm (1.38'', 1.57'', 1.77'') 50, 55, 60 mm (1.97'', 2.17'', 2.36'') 65, 70, 75 mm (2.56'', 2.76'', 2.95'') 80, 85, 90 mm (3.15'', 3.35'', 3.54''). Note: the tool should be used with your workshop air or smoke machine. Kind Reminder Refer to manufacturer's manual relating to the maximum air pressure of the turbo or other system being tested. Over pressurisation may damage system components! For example: The maximum pressure in most vehicle turbo systems is approximately 15psi (1bar) up to 25psi (1.7bar) A vehicle coolant system is typically rated at 15psi How To Use? 1. Select the correct air inlet adaptor and plug adaptor (fig.1) by first measuring the hose diameter. Each adaptor has three diameters to fit different sizes of hose. 2. Set regulator of tester to 5psi to check for large leaks with valve, open (operating handle inline with the hose axis). and with the air coupling disconnected. 3. Plug the outlet of the system with the appropriate blank end adaptor. 4. Connect the inlet adaptor, set at 5psi, to the system inlet. 5. Connect the air coupling to check for leaks at the pre-set (5psi). If a leak is identified audibly or if the pressure gauge pointer falls, it indicates that the system has a fault resulting in loss of pressure. Repair the leak and retest. 6. If no leaks are evident, regulate pressure to 10psi and repeat step 5. 7. If no leaks are evident, regulate pressure to a maximum of 15psi or to the manufacturer’s maximum pressure and retest as in step 5. 8. If the gauge pointer remains stationary for one minute it will indicate that the system is in good working order. 9. Release the pressure in the system by rotating the ball valve lever to align with hose axis. 10. Disconnect the quick coupler, clean and return all items to carry case. What You Get 1PCS Pressure Gauge with a shut off ball valve, a pressure release valve, air coupling and air inlet 8PCS Plastic Stepped Adapters(35mm - 90mm) 1PCS User Manual All in a plastic suitcase

Price: 79.99 USD

Location: shenzhen

End Time: 2024-08-27T09:11:58.000Z

Shipping Cost: 0 USD