Turbo Boost System Leak Tester Tool Turbocharger Air Pressure Leakage Tester Kit

Description: The turbocharger leak tester is an advanced device designed for detecting turbocharger leakage problems. It is characterized by high accuracy, high efficiency and ease of operation, which can effectively help users quickly and accurately detect turbocharger leakage problems to ensure the normal operation of the engine. The turbocharger leakage tester not only has the ability to measure with high accuracy, but also has the characteristic of fast response. It can complete the inspection of the whole turbocharger in a short time, which greatly improves the inspection efficiency. In addition, the operation of the tester is simple and easy to understand.CHECKING& TRACING LARGE/SMALL LEAKSDesigned for checking turbo system leaks or cooling system pipes. By charging your turbo system with low-pressure air to help you check and locate leaks on the turbo system of various vehicles. You can use this leak detectorfor a variety of leak checks:1.Turbo System Leak Diagnosis2.Cooling System Pipe Leak Diagnosis3.Intake Emissions ExhaustLeak DiagnosisEASY TROUBLESHOOTING1.Plug the output side of the turbo and the intake inlet with the plugs.2 Open the manual valve and adjust the regulator to the appropriate pressure to pressurize the turbo system to test leakage.3 Connect air regulator toplugs, then connect the air supply to the air inlet, and pressurize the turbo system.4 After pressurization, you can see whether the guage maintains the pressure and is accompanied by the sound of a leak.PRESSURE GAUGES ®ULATORSComes with a 0-6bar (0-87psi) high pressure gauge, which allows you to observe the pressure inside the hose at any time to prevent overpressure.Equipped with a regulator that allows you to adjust the pressure on the system to be tested in order to prevent seal blowoutsHow to Use? 1.Select the correct adapter by first measuring the hose diameter. 2.Set regulator of tester to 5psi to check for large leaks with valve, open (operating handle inline with the hose axis). And with the air coupling disconnected. 3.Select correct size adapters and place in hoses,then tighten the clamp. 4.Connect the air coupling to check for leaks at the pre-set (5psi). If a leak is identified audibly, it indicates that the system has a fault resulting in loss of pressure. 5.If no leaks are evident, regulate pressure to 10psi. 6.If no leaks are evident, regulate pressure to a maximum of 15psi or to the manufacturer’s maximum pressure and retest. 7.If the gauge pointer remains stationary for one minute it will indicate that system works good. 8.Release the pressure in the system by rotating the ball valve lever to align with hose axis. 9.Disconnect the quick coupler, clean and return all items to carry case.Package list4 pairs of stepped plugs 35, 40, 45 mm (1.38, 1.57, 1.77).50, 55, 60 mm (1.97, 2.17, 2.36).65, 70, 75 mm (2.56, 2.76, 2.95).80, 85, 90 mm (3.15, 3.35, 3.54)Pressure gauge with pressure reducing valvePlastic carrying case

Price: 70.65 USD

Location: Perth Amboy, New Jersey

End Time: 2024-12-20T16:44:48.000Z

Shipping Cost: 0 USD