TURBO BOOST LEAK TESTER RACE SHOP PROMOD 80 88mm 4" 5" 5.5" 6" Precision Garrett

Description: Running some serious turbo in your shop? Are you putting down all the power and staying in the compressor efficiency zone!? Promod or heavy duty semi-truck fleet this boost leak tester kit will cover every turbo you have from 4" up to 6" and effectively allow you to find and fix any leaks that are cutting off your quarter mile time or for keeping the fuel economy in check hauling a load.A boost leak test will detect every single leak in your turbo engine! Fixing these leaks will let you spool your turbo with confidence knowing the engine is making the most power, fuel economy and extending the turbos life dramatically!This shop kit gives you a billet end cap that adapts to 4", 5", 5.5" and 6". You will not need any other size. Covers all the common sizes, the 5.5" borg warners, pro-mod 6", garrett, precision, etc... With the engine off, Install the tester on your turbo chargers inlet flange and fill your charge pipes with shop air or a portable air compressor, and this simulates the same scenario if your engine was on and turbo making boost. PURCHASE OPTIONS [Shop Kit Add On] Without Extension Kit: Excludes the 5ft extension line kit. See Photos [Shop Kit Add On] With 5ft Extension Line & 150 PSI Regulator and Valve: 5 foot extension hose to allow comfortably reaching in hard to access areas and give you the ability to easily regulate the shop pressure down to a manageable test pressure for your charge pipes. See Photos.Features: 4" 6061 Billet Aluminum End Cap anodized for corosion protection. This cap has a beaded lip and machined grooves for superior grip and prevent the silicone coupler from slipping. Tapped wtih 1/8" NPT for the boost gauge and 1/4" NPT for the air fitting M-Type 1/4" NPT Air fittingCustom 15 PSI / 1 BAR boost gauge. Liquid filled, shock proof, stainless steel housing. (15 PSI gauge for safety vs. 30 PSI that can present a dangerous situation) Stainless Steel Tbolt Clamps, (2) 4", 5", 5.5", 6". Stainless tbolt & band with 4 spot welds. Heavy gauge band on the larger sizes.Silicone Adapters to allow you to test over hard pipes of 4", 5", 5.5", 6". The 4" billet end cap can also be used inside a 4" hose on your intake.5 ft Extension hose for easy reach and stainless steel shut off ball valve for pressure regulation. All 1/4" NPT threads.Warranty on all components except tbolt clamps. Reach out to us for hassle free warranty.Ships worldwide

Price: 258.75 USD

Location: Corona, California

End Time: 2024-09-01T06:30:30.000Z

Shipping Cost: N/A USD