Cane Creek

Thor Labs Z606 6mm Motorized Actuator/Positioner, 1/4"-80, Predecessor to Z806

Description: Thor Labs Z606 6mm Motorized Actuator/Positioner, 1/4"-80, Predecessor to Z806 This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. Click here to check out our other Gizmos that are available... Item Description and Features:This item is a New old stock Thor Labs Z606 motorized actuator.A company canceled a product line and I purchased all of the inventory.These are typically used for positioning of stages, mirrors, or optics in laser systems.These are drop in replacements for many manual stages that use a 1/4"-80 thread mounting.This is item was superseded by the Z806 model.Total length of travel is 6mmThread pitch for mounting is 1/4"-80Cable Length is approximately 25inchesMotor voltage is 12v DCMotor current is .080 amp maxEncoder type is RotaryEncoder power is 5VLimit sensors are for minimum travel and max travelLead screw pitch is .5mmBacklash is <8umAxial load capacity 9Kgspeed range 50 to 425 um/sResolution 40nm (depends on load)Uses a standard 9 pin male connectorPinouts are:1- Motor + (positive)2- VCC 5v for Encoder3- Encoder Channel A4- Encoder Channel B5- Ground for Encoder6- Motor - (negative)7- Limit Ground8- Reverse Limit (minimum travel)9- Forward Limit (maximum travel) Testing Done:No testing done as these are new old stock.You will Receive:Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures, unless otherwise stated. If it is not pictured, it is not included. (1) Thor Labs Z606 6mm motorized actuator in static bubble bag Item Condition: We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. New - Items are New Old Stock Item is sold "as is" No guarantee Item Weight: Shipping Weight is approximately 1.10 lbs and 0.00 oz . You can also reach us by visiting our retail store directly or via phone during normal business hours.SurplusGizmos is located:Hillsboro Oregon, 97124Retail hours are Wed - Fri 10am - 6pm, Sat 10am - 5pmFeel free to stop by to examine items during regular hours. Shipping methods are as follows:Items are generally shipped in 2 to 3 business days (Wed to Fri) after payment has cleared except for large objects that may take more time for packaging.International orders may take longer to ship due to delays with Post Office.Buyer is to pay actual shipping costs based on shipping address.There is a packaging fee added to all orders ranging from $2 to $10 depending on size of box, material etc. It will be automatically added to the shipping charge.USA customers can choose UPS, USPS Priority Mail, or USPS express mail. We can ship on your account via UPS but we must charge for packaging (usually $2 to $10)Non USA customers can choose USPS priority international or USPS express international. We can ship on your account via UPS or Fedex (may be extra fees for fedex) but account must be verified. Packaging fee is as stated above.Items can also be picked up during normal business hours. Please call ahead so we can have it ready.We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Payment Policy: Payment is to be made directly through ebay, Paypal, or wire transfer.Payment is due within 8 days of auction close or a dispute will be filed. Warranty Policy: Due to the unknown condition, age, and weirdness of items that are sold thru our store, most items come without a warranty.This means that all used or surplus items are sold "AS-IS" except for where it is stated explicitly otherwise in the items description.All new items are warranted by manufacturer.There are no returns for products sold "AS-IS".What AS IS means is what you see is what you get and that we do NOT guarantee the item.Check description for exact listing. Email us with any questions prior to buying as there are no returns.If item is warranted then the warranty is for defects in the product not compatibility. In all returns the shipping to our Store is the responsibility of the purchaser.All returned items will be tested. If no problem is found return shipping will be charged.Products under warranty will be replaced with same or similar item depending on availability or a store credit will be given.The Store is not responsible for the way you use or misuse any item you purchase.If you are not knowledgeable in the use of the item seek assistance first.If you have questions on an item that you wish to purchase or bid on, please ask questions first via e-mail.It is your responsibility to understand and know what you are buying/bidding on.Remember that bidding on an item is entering into a contract to purchase this item. If you do not follow through with your obligation of payment an unpaid item dispute will result.

Price: 75 USD

Location: Hillsboro, Oregon

End Time: 2023-12-30T01:06:26.000Z

Shipping Cost: N/A USD

Product Images

Thor Labs Z606 6mm Motorized Actuator/Positioner, 1/4"-80, Predecessor to Z806Thor Labs Z606 6mm Motorized Actuator/Positioner, 1/4"-80, Predecessor to Z806

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Thor Labs

MPN: Z606

Recommended

Thorlabs CXYZ1 qty2 ,LCP07 qty2,Cage assembly w/posts
Thorlabs CXYZ1 qty2 ,LCP07 qty2,Cage assembly w/posts

$399.00

View Details
Thorlabs LDS9 - 9 VDC Regulated Power Supply / Adapter 115v or 230v , Switchable
Thorlabs LDS9 - 9 VDC Regulated Power Supply / Adapter 115v or 230v , Switchable

$19.99

View Details
NRC Model TSX-1A Stage And NRC 420 With Thorlabs Jig/Assembly
NRC Model TSX-1A Stage And NRC 420 With Thorlabs Jig/Assembly

$65.00

View Details
Thorlabs Thor Labs 201/579-7227 Photodetector, Power Supply And Cable
Thorlabs Thor Labs 201/579-7227 Photodetector, Power Supply And Cable

$59.99

View Details
Thorlabs Polarized Borosilicate Beamsplitting Cube One Inch Unmounted
Thorlabs Polarized Borosilicate Beamsplitting Cube One Inch Unmounted

$50.00

View Details
*JM*  THORLABS Thor Labs S2011 4.5 mW 635nm Laser Diode Kit -NEW (JTV18)
*JM* THORLABS Thor Labs S2011 4.5 mW 635nm Laser Diode Kit -NEW (JTV18)

$225.00

View Details
THORLABS KM100 KINEMATIC MIRROR MOUNT FOR Ø 1" OPTIC
THORLABS KM100 KINEMATIC MIRROR MOUNT FOR Ø 1" OPTIC

$29.99

View Details
Thor Labs TTR001/M Tilt/Tip/Rotate stage with Mitutoyo micrometers
Thor Labs TTR001/M Tilt/Tip/Rotate stage with Mitutoyo micrometers

$675.00

View Details
Thorlabs CM1-BS013 30 mm Cage Cube-Mounted Beamsplitter w/ Thorlabs CM1-E02 30mm
Thorlabs CM1-BS013 30 mm Cage Cube-Mounted Beamsplitter w/ Thorlabs CM1-E02 30mm

$345.00

View Details
(1 per order) Thorlabs DP12A - Ø1.5" Dynamically Damped Post, 12" Long
(1 per order) Thorlabs DP12A - Ø1.5" Dynamically Damped Post, 12" Long

$100.00

View Details