Teltonika FM36M1 GPS car tracker device Entel Special NB-IoT and LTE CATM1 track

Description: Teltonika FM36M1 Special NB-IoT and LTE CATM1 tracker with high gain GNSS and LTE/GSM antennas, internal backup battery FM36M1 is GNSS, LTE CAT M1, NB IoT terminal with backup battery for SPECIAL applications. FM36M1is designed for light vehicles tracking but also suitable for advanced applications like logistics, delivery services, utility transport and more. It is excellent for refrigerated transport, because this terminal have extended input/output set and 1-wire interface for temperature monitoring. With Teltonika CAN adapters, FM36M1 can be even used in agriculture or construction & mining. Moreover FM36M1 supports LTE CAT M1 and NB IoT, with additional GSM backwards compatibility, which makes this device usable with newest, cost efficient and most popular technologies. FM36M1 also has a USB port for device status log output and configuration. Basic characteristicsGSM/GPRS/4G LTE CAT.M1 features:FDD-LTE:B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B26/ B28TDD-LTE:B39 (for Cat.M1 only)GSM/GPRS bands:850/900/1800/1900MHzGPRS and EDGE class 12SMS (text, data) Hardware features:Cortex®-M3 processor;8 Mbit internal Flash memory;Built-in accelerometer sensor. Interface features:Power supply: 10 ÷ 30V;2 digital inputs;2 analog/digital input;2 open collector Digital output;1 Wire interface:Temperature sensoriButtonInternal backup battery;2 Status LEDs:NavigateStatusInternal USB port;Internal GSM antenna;Internal GNSS antenna;INPUT 5 and INPUT 6, for LV-CAN200 and ALLCAN300 adapter connection; GNSS features:33 channel GNSS receiver-165 dBm sensitivityHot start <1sWarm Start < 25sCold start < 35sNMEA-183 protocolGPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPSAccuracy < 3m Special features:Any element event triggers (external sensor, input, speed, temperature, etc.);Highly configurable data acquisition and sending;Multiple Geo-fence areas;Sleep mode;Deep sleep mode;Configurable scenarios available;Real-time process monitoring;Authorized number list for remote access;Firmware update over GPRS or USB port;Configuration update over GPRS, SMS or USB port;TCP/IP or UDP/IP protocol support;Up to 3854 records storing;Radio frequency jamming detection.Records exporting using USB;Offline working mode; Technical information about internal battery Internal Back-Up BatteryBattery Voltage (V)Nominal Capacity (mAh)Power (Wh)Charge Temperature (°C)Discharge Temperature (°C)Storage Temperature (°C)Li-ion rechargeable battery3.75～3.901700.64 – 0.660 to +45-20 to +60-20 to +45 for 1 month -20 to +35 for 6 monthsBatteries are covered by 6 month warranty support.CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.Technical features Part NamePhysical SpecificationSystem LEDLEDNavigation LEDLEDSocket 2x6Tyco Micro MATE-N-LOK™ 4-794628-0 or similarUSBMicro USB socket Technical Details2 W max. Energy consumption at 12 V (Power supply 10...30 V DC)GPRS: average 150 mA rms Nominal: average 50 mA rms GPS sleep: average 18 mA Deep Sleep: average 5 mABattery charge currentmax. 100 mARated currentmax. 250 mAOperating temperature (without battery)-40..+85 °CStorage temperature (without battery)-40..+85 °CStorage relative humidity5..95% (no condensation)Internal fuse3A, 125V Dimension drawing:Electrical characteristicsCharacteristic descriptionValueMin.Typ.Max.UnitSupply Voltage:Supply Voltage (Recommended Operating Conditions)1030VDrain current (Digital Output1 OFF)241.69µADrain current (Digital Output1 ON)0.10.5ADrain current (Digital Output2 OFF)240.26µADrain current (Digital Output2 ON)0.10.5AStatic Drain-Source resistance (Digital Output ON)300mΩDigital Input:Input resistance (DIN1)15kΩInput resistance (DIN2, AIN2)20kΩInput resistance (AIN1)120kΩInput voltage (Recommended Operating Conditions)0Supply voltageVInput Voltage threshold (DIN1)7.5VInput Voltage threshold (DIN2)2.5VInput Voltage threshold (AIN1, AIN2)3.5VAnalog Input:Input voltage (Recommended Operating Conditions), Range 1010VInput resistance, Range 1120kΩMeasurement error0.47%Additional error±17.3mVInput Voltage (Recommended Operating Conditions), Range 2030VInput resistance, Range 2150kΩMeasurement error1.01%Additional error±1390mV

Price: 80 GBP

Location: Stoke-on-Trent

End Time: 2024-11-02T23:30:46.000Z

Shipping Cost: 20.7 GBP