Team Associated RC10B7D Team 1/10 2WD Electric Buggy Kit 90042

Description: Team Associated RC10B7D Team 1/10 2WD Electric Buggy Kit 90042 | ASC90042 Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years starting with the original RC10 and are proud to introduce this next generation to the world--the RC10B7D. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7D is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.The RC10B7D is the recommended starting kit for those who plan to race on dirt, clay, and some low-grip AstroTurf tracks. This kit comes equipped with a ball differential and an optimized setup which includes softer springs and lower pack pistons.Includes: Assembly Kit Low-profile body KPI adjustable steering and caster blocks (3 options) Standard and HRC (High Roll Center) rear hubs 7-inch rear wing and 2.5-inch front wing Shock tower covers front and rear Required to Complete: 1:10 scale 540-size electric RC car motor 1:10 scale radio control electronic speed control 7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height) Battery charger (compatible with chosen battery) 2 channel surface transmitter and 2 channel receiver Steering servo Lexan specific spray paint for body 1:10 scale off-road wheels and tires Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors, Reamer, Wrench Set, Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers Features: 5-gear laydown transmission with low profile motor mount Long-arm suspension geometry KPI adjustable steering and caster blocks. Three options included. Vertical front outer ballstud Height adjustable aluminum front bulkhead Standard and HRC (High Roll Center) rear hubs included Highly adjustable battery holder with thumb tabs 7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets HD 69mm CVA bones and differential outdrives Lightweight molded servo mount One-piece rear wing mount New 7-inch rear wing and 2.5-inch front wing Low-profile body Shock tower covers front and rear 3.5mm turnbuckles and ballcups Specifications: Power Source: Electric Terrain: Off-Road Body Style: Buggy Scale Size: 1:10 Scale Assembly Level: Kit Length:390mm (15.35in) Width: varies with user selected options Wheelbase: varies with user selected options Weight: varies with user selected options Internal Gear Ratio: 2.60:1 Drive: 2WD Team Associated RC10B7D Team 1/10 2WD Electric Buggy Kit 90042 | ASC90042 Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years starting with the original RC10 and are proud to introduce this next generation to the world--the RC10B7D. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7D is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.The RC10B7D is the recommended starting kit for those who plan to race on dirt, clay, and some low-grip AstroTurf tracks. This kit comes equipped with a ball differential and an optimized setup which includes softer springs and lower pack pistons. Includes: Assembly Kit Low-profile body KPI adjustable steering and caster blocks (3 options) Standard and HRC (High Roll Center) rear hubs 7-inch rear wing and 2.5-inch front wing Shock tower covers front and rear Required to Complete: 1:10 scale 540-size electric RC car motor 1:10 scale radio control electronic speed control 7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height) Battery charger (compatible with chosen battery) 2 channel surface transmitter and 2 channel receiver Steering servo Lexan specific spray paint for body 1:10 scale off-road wheels and tires Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors, Reamer, Wrench Set, Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers Features: 5-gear laydown transmission with low profile motor mount Long-arm suspension geometry KPI adjustable steering and caster blocks. Three options included. Vertical front outer ballstud Height adjustable aluminum front bulkhead Standard and HRC (High Roll Center) rear hubs included Highly adjustable battery holder with thumb tabs 7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets HD 69mm CVA bones and differential outdrives Lightweight molded servo mount One-piece rear wing mount New 7-inch rear wing and 2.5-inch front wing Low-profile body Shock tower covers front and rear 3.5mm turnbuckles and ballcups Specifications: Power Source: Electric Terrain: Off-Road Body Style: Buggy Scale Size: 1:10 Scale Assembly Level: Kit Length:390mm (15.35in) Width: varies with user selected options Wheelbase: varies with user selected options Weight: varies with user selected options Internal Gear Ratio: 2.60:1 Drive: 2WD × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Rakon CNC AL Propeller Guards (Green) - Blade Inductrix 31mm Rakon CNC AL Propeller Guards (Orange) - Blade Inductrix Rakon CNC AL Propeller Guards (Purple) - Blade Inductrix Rakon CNC AL 6mm Motor Mount Set - Blade Inductrix IDTX601 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Excel RC Postage Click the Postage tab above the listing description for more info We will combine shipping. Please request an Invoice or message us after purchase to adjust shipping charges. Payment Accepted Payment Methods PayPal Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 389.99 USD

Location: Garden City, Michigan

End Time: 2024-09-13T19:17:23.000Z

Shipping Cost: 0 USD