Stud Finder, 5 in 1 Multi-Function Wall Stud Sensor Detector with LCD Display

Description: Product DescriptionStud mode indicationAC mode indicationMetal mode indicationStud 1/2 in. scanStud 1 in. scanStud 1-1/2 in. scanMulti-Function Wall Stud Sensor DetectorMulti-Function Wall Stud Sensor DetectorStud finder is a easy-to-use, also a necessary tool that quickly locates the edges of wood and metal studs and joists behind walls, floors, and ceilings etc.This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the edge of the stud.Battery installation 1.Open battery door on back of case. 2.Connect a 9-volt battery to battery clip. 3.Insert battery into case and replace battery door.Easy To UseOnly three buttons, first press ON/OFF button, then select the probe type ,after that just press and hold the “Scan button”(at the left side of the device) and scan horizontally across the object surface. Auto power off without any operation after 60 seconds.LED Digital ScreenLCD with digital display and continuous sound warning indicating you the location of the edges of the studs.makes home improvement projects much easier.Include The BatteryCompact design is easy to hold and use. Low battery indication. Battery :1 x 9 V battery(included).KULED Stud Finder is a easy-to-use, also a necessary tool that quickly and easily locates the center of wood and metal studs and joists behind walls, floors, and ceilings etc.This stud finder operates by slowly slide device horizontally across wall, right of left. When full bars appears on the LCD and steady tone sounds, you have located the center of stud. Features:Kuled stud sensor Stud 1/2 in. Scan model locates the center and edges of wood and meta studs up to 1/2 in. (13mm) deep. Stud 1 in. Scan model locates the center and edges of wood and meta studs up to 1 in. (25mm) deep. Stud 1-1/2 in. Scan model locates the center and edges of wood and meta studs up to 1-1/2 in. (38mm) deep. Metal scan detects metal up to 2.36 in. (60mm) deep. AC scan detects live unshielded AC wires up to 2 in. (51mm) deep.- Auto power off after about 1 minutes of non-use.- Low battery indicator- Auto calibration all functions detection- Battery :1x9V battery（include） How to use 1: Press ON/OFF button to power on the device, and press RIGHT button to choose the scanning mode you want to detect. Listen “beep”to confirm the mode button effective.2: Place the device flat on wall first. Then press and hold the button at the left side of the device ,and keep the unit still until the unit sound a short beep twice and the display bars will be cleared .3: While still holding on the button ,move the stud finder on the desired surface to scan and detect for studs, metal beams, rebars, pipes ,AC wire etc .you can scan the object from left to right.4 : When the device detected an object , it will beep continually and a peck shape will also display on the LCD screen .Battery installation1.Open battery door on back of case.2.Connect a 9-volt battery to battery clip.3.Insert battery into case and replace battery door.Package Contents1 x Stud Finder1 x 9V battery (included)1 x User Manual

Price: 22.99 USD

Location: Houston, Texas

End Time: 2024-01-02T09:38:22.000Z

Shipping Cost: 0 USD