Stone Master Molds Rubber Mold for Concrete, Mountain Ledge Flats

Description: Professional grade rubber mold that will last for hundreds of pours, created from natural stone to reproduce the natural stone's finest detailsMade in the USA from plastisol rubber, including recycled plastisolNo release agent necessary, saving you money, time, and clean up, as well as easy, clean release of face color pigments, unlike plastic moldsEach of 5 available mold versions you purchase has one-of-a-kind stones with no repeatsMatching corner molds are available Stone Master Mold's rubber stone mold in Mountain Ledge is ideal for making your own veneer stone for any indoor/outdoor project where stone cladding is needed. Mountain Ledge is a dry stack, contemporary stone, hand-cut in lengths of 5″ to 20″ and widths of 1.5″ to 5″. The finished product/stone is approximately 1-1.75" thick. Each mold makes approximately 1.375 square feet drystacked and 1.75 square feet, if grouted. Stone Master's rubber molds are made from plastisol, which requires no release agent and will last for hundreds of pours. Made in the USA, both materials and labor. Available in 5 unique version, with no stone repeats. Each mold measures approximately 23.75" long by 11.5" wide, by 2.25" thick. Manufactured Stone Basic Mixing Procedures Using A Pre-bagged Concrete Mix: This is one suggestion for mixing the concrete for manufactured stone. There are many other instructions available online, including videos. BE SURE TO USE A CONCRETE MIX THAT CONTAINS PORTLAND CEMENT. We recommend Sakrete Maximizer, as it has lightweight aggregate, is high strength, and yields more product, but there are many kinds you can use. Follow the manufacturer's instructions for mixing. If using pigment, add desired iron oxide pigment to mixer (100% pure, no additives). These can easily be found on Amazon, etc. A plasticizer can be added to reduce the amount of water in the mix. Pour into the molds which may already have coloring additives? NO RELEASE AGENT NECESSARY. Vibrate molds to release air bubble. Cure in the molds for approximately 24 hours at the minimum of 70 degrees Fahrenheit before demolding. Higher humidity is desired. Molds can be covered with a tarp to retain more heat and humidity. Continue to cure demolded stones at 70 degrees or greater until ready.

Price: 125.95 USD

Location: Kansas, Oklahoma

End Time: 2024-02-28T22:17:10.000Z

Shipping Cost: N/A USD