Sony BVM-14F5U HR Trinitron CRT Color Video Monitor Vintage Retro Gaming

Description: Sony BVM-14F5U HR Trinitron CRT Color Video Monitor Vintage Retro Gaming Component intputs not tested. Model Description: 14" (13" V) 800 TVL G1 Standalone, PAL and NTSC. AC100-240V 50/60Hz 1.2-0.6AModel DetailsA standalone evaluation grade color video monitor designed for critical applications, Sony's BVM-14F5U features .25mm CRT for 800 TVL resolution, SMPTE C Phosphors, a built-in controller, an IC Memory Card slot, and a Beam Current Feedback system for stabilized color temperature. Other features include four input module slots for BKM input decoder/adapters (up to 24 composite inputs), one permanent RGB/Component input, data save/exchange through RS-485 or IC Memory card (via BKM-10R or BKM-11R), a modular chassis construction, Auto-setup (chroma, phase), Auto WhiteBalance using industry standard color analysers (Minolta, Thoma, Phillips), and 16:9/4:3 aspect ratios. Application: DTV 800/600 TV Lines in 4:3/16:9 modes, SMPTE-C Phosphors Multiple Format SD and HD Display including 1080i, 1080/24Psf and 720P Matrix Values for ITU 601, ITU 709, and SMPTE 240M Colorimetry Standards Auto Setup adjusts Presets and White Balance Automatics Accept Measurements from most Industry Standard Lght Probes 3 Option Slots for both Analog and Digital Decoders RS 485 Serial Control for Multiple Monitor Control Features: ISR (Interactive Status Reporting): When linked to an ISR network, the monitor can be queried for current operating conditions.Modular Control Panel: A separate control panel allows for valuable rack space saving. (A 14-inch standalone version with built-in controls is also available.)VITC Reader (Vertical Interval Time Code): On-screen display of time code for editing and duplicating references.Auto White Balance: Precise color temperature adjustment is possible with well known industry analyzers such as Minolta, Thoma, Philips, Tektronix, Graseby.Higher Resolution: With the new and improved CRT, Sony has surpassed the quality of its previous line of high resolution without tradeoff in color uniformitySMPTE C Phosphors: SMPTE C standard phosphors maintain precise color representation which allows for accurate color reproduction and easy monitor matching.Color Temperature Stability: As the CRT ages or ambient temperature changes, the drive of the electron beam is continually adjusted so that consistent color temperature is maintained.Multiple Input Slots: Allows the monitor to be configured with multiple adapter boards for various combinations of decoders and additional inputs.Close Caption Reader: Decodes and displays text from captioned signals.Safe Area/Title Area: On-screen display of safe area and title markers in 4:3 and 16:9 aspect ratios for titling references. Specifications: System - 525 lines 60 fields or 625 lines 50 fields interlacedPower Requirements - AC 100-120V/220-240V, 50-60 Hz (UL listed for 120V only)Power Consumption - 1.5-1.8A / .07-.08 ACRT Type - HR Trinitron CRT SMPTE C Phosphors AG Pitch: 0.30 mm, 90( deflection center resolution 800 TV linesColor Temperature - PRESET: Factory adjusted for D65 white. Manual control is also available, allowing user setting of color temperature.Normal Scan - 5% overscan of the effective picture areaStability of Raster Size - 1% of picture height for a 100% APL change (when 100% peak white is set to 30 ft-L)External Sync - Loop-through BNC x 1, 1-8 Vp-p negative, high impedanceUnderscan - 3% underscan of the effective picture areaConvergence - 0.3 mm within circle centered on the screen with a diameter equal to the vertical height, 0.6mm at any other point.Brightness (preset) - ISR - 30 ft-LConnectors - ISR - Loop-through BNC x 3Analog Component - ISR - Y: 1.0 Vp-p ± 6B, high impedance R-Y/B-y: 0.7 Vp-p ±6dB, high impedanceReturn Loss - ISR - More than 46dB (7 MHz when 75 ohms terminated)Remote Control Inputs - ISR - Remote 1: Loop-through D sub 9-pin - (for RS-485 serial remote control) Remote @: D sub 9-pinAFC Time Constant - ISR - Fast mode: 0.5 ms, Normal mode: 2msHorizontal Hold - ISR - ± 500 Hz (when AFC 0.5ms)Retrace Time - ISR - Horizontal: Normal within 1ms, Underscan within 0.8ms Vertical: within 10µsLinearity - ISR - 0.5% within circle centered on the screen with a diameter equal to the vertical height, 0.6 mm at any other pointHumidity - ISR - 0 - 90% non-condensingAltitude - ISR - 10,000 ft (Approx. 3,050m)Weight - ISR - 57lbs (26kg)Screen Size (Diagonal x W x H) - ISR - 13 1/8 x 10 5/8 x 8 inches (332 x 268 x 201mm)Slots for input adaptors - ISR - 4Operating Temp. Range - ISR - 0-40(C(32-104(F), Optimum operating range 20-30( C (68-86( F)Dimensions W x H x D - ISR - 19 x 11 1/8 x 20 7/8 inches (482 x 280 x 530 mm) Additional Detailed Information: Product HighlightsSMPTE C Standard phosphorsSupplied Auto Alignment system for easy set-upEquipped with Color temperature alignment system for easy set-up with industry standard color analyzers (or SONY probe)Stabilized color temperature obtained with a beam current feedbackComponent (Y/R-Y/B-Y)/RGB input facility availableAccepts various signals by inserting optional inout boards directly into the rear panel (equipped with 4 open slots)Number of inputs greatly expanded when inserting optional input boards; 24 composite, 12 serial digital, 9 component 9 RGB or 8 Y/C inputs at a maximumAspect ratio is switchable between $:# and 16:9. (16:9 bezel is available as an optionSerial or parallel remote control capabilityIC memory card available as an option for easy monitor set-upSupported by the Sony Interactive Status Reporting (ISR) system for remote monitor diagnosis.

Price: 1250 USD

Location: Orange, California

End Time: 2024-02-27T21:36:00.000Z

Shipping Cost: 0 USD