Shimano Ultegra Di2 R8170 Powermeter Groupset

Description: SHIMANO Ultegra Di2 R8170 Powermeter Groupset 2x12 - might not come in aftermarket box. Supplied without: 1) Discs /Rotor | 2) Bottom Bracket bearing | With this Ultegra, Shimano offers the perfect group for dedicated amateur riders. It comes with contemporary Di2 technology, 12-speed drive, even has a power meter on board for performance measurement and probably offers the best price-performance ratio in the road bike sector. The many years of experience of the Japanese can be seen in the high functionality and quality. Technically, the Ultegra Di2 is similar to its big sister Dura-Ace. The shift commands are transmitted wirelessly to the derailleur and rear derailleur. The latter are connected to a central battery, which can, for example, be installed well hidden in the seat post. The 12-speed drive was also adopted and allows for a larger gear ratio. This makes long climbs very pleasant, even for less trained drivers. Shift|brake lever SHIMANO Ultegra Di2 ST-R8170 2x12-speed + disc brake BR-R8170 Flat Mount Thanks to the dual-control shift/brake lever, you have your bike under control at all times. The raised croissants offer various gripping options, so that hands and arms can regularly change their position and signs of fatigue are avoided. It is switched at the touch of a button. This is quick and energy-saving. The pressure point is so precise that unwanted switching operations are practically impossible. With the help of the Shimano E-Tube app, this wireless system can also be fully personalized. Among other things, the shifting speed can be set, a fully or semi-synchronous shifting mode can be selected and the program buttons on the lever can be assigned specific functions. The energy consumption is also very low. According to Shimano, the two CR1632 button cells should power the electronics for over 3 years. In addition, they can be exchanged quickly. The lack of wiring not only simplifies assembly for you, you also get a neat and tidy cockpit. When braking, you have optimal control over your bike at all times with the SERVO WAVE technology. This offers controllability and sufficient power that is second to none. But not only the inner values â€‹â€‹convince. The ergonomics have also been significantly improved. The recessed grip is better formed and the rounded brake handles lie securely under your fingers even on long descents. In addition, the grip width is individually adjustable. The completely redesigned Ultegra BR-R8170 caliper brings a new level of control and stopping power to the road bike world. The new design minimizes brake judder. In addition, despite its compact size, this system is quieter and more maintenance-friendly than ever before, so that work such as bleeding, for example, does not pose any major problems for a reasonably skilled biker. Brake disc SHIMANO Ultegra Center Lock SM-RT800S | 160mm Shimano Ice-Tech is a cooling technology that ensures maximum consistent braking performance. The brake disc is characterized by its three-layer sandwich construction made of stainless steel flanks with an aluminum core and offers significantly improved heat dissipation. This allows the temperature to be reduced by around 100 °C. The new Ultegra FREEZA rotors also have aluminum cooling fins, which can reduce the system temperature by a further 50 °C thanks to their increased surface area. The discs are equipped with a center lock mount for quick and easy installation, a secure hold and a clean and compact look. Crank SHIMANO Ultegra FC-R8100-P 172 mm 52-36 teeth power meter | 2x12 speed The Ultegra R8100-P crank not only converts your pedal power into propulsion, with its high rigidity it also ensures extremely fast and precise shifting. The high shifting precision is supported by the optimized chainring design. To keep the weight low, the Japanese continue to rely on the proven Hollowtech II crank arm design. A large selection of crank arm lengths and chainring options ensures the availability of the right crank for every type of rider and every terrain. The new integrated power meter processes the data with outstanding accuracy. With one sensor each on the left and right crank arm, you can, in addition to the performance evaluation, also detect muscular imbalances between the legs. The waterproof construction provides reliable and accurate data in all conditions. This is also ensured by the active temperature compensation of the software. A manual zero point calibration can be carried out in no time at all using a switch on the transmitter. Strain gauges developed by Shimano are used for the greatest possible accuracy. The internal lithium-ion battery supplies the power meter with electricity for up to 300 operating hours and is charged via an integrated port without being removed. Front derailleur SHIMANO Ultegra Di2 FD-R8150 | 2x12 speed The advantage of electronic shifting systems is particularly noticeable in the front derailleur. A push of a button and the chain moves from one chain ring to the other as if by magic, without any effort. It also thinks along and automatically adjusts its position to the chain skew in order to avoid grinding noises. With the help of the Shimano E-Tube app, the front derailleur is adjusted after installation and a manual, fully or semi-synchronous shift mode is selected depending on preference. Rear derailleur SHIMANO Ultegra Di2 RD-R8150 | 2x12 speed Gear changes have never been so quick. A push of a button and the chain changes from one sprocket to the other in fractions of a second, no matter what the situation. This is carried out by the powerful and reliable integrated motor. The system is also supplied with new energy via the rear derailleur. The charging cable is plugged into the small charging port and after about 1.5 hours you can swing back into the saddle. A small LED reliably shows the capacity that is still available. With the help of the Shimano E-Tube app, the rear derailleur is fine-tuned after installation and a manual, fully or semi-synchronous shift mode is selected depending on preference. The narrow Shadow profile reduces the risk of damage in the event of a fall. Cassette SHIMANO Ultegra Cassette CS-R8100 | 12-speed 11-30/34 teeth The Shimano Hyperglide cassettes have set new standards in off-road use with their smooth upshifting and downshifting across the entire range of gear ratios. For the Ultegra group, the Japanese have also adopted this technology for use on racing bikes. Even with the greatest effort on climbs or when sprinting to the finish line, you can now switch gears without hesitation. Longer teeth make this possible. Despite the new design and the additional 12th sprocket, the CS-R8100 cassettes are also compatible with previous 11-speed Shimano Road freewheel bodies. Chain SHIMANO Ultegra CN-M8100 / Deore XT 12-speed | 126 links with chain lock The CN-M8100 chain is specially designed for the 8100 chainrings and cassettes. The millings on the inside of the lugs harmonize perfectly with the Dynamic Chain Engagement+ (DCE+) Narrow-Wide tooth profiles of the new Ultegra chainrings. The design results in a tighter fit of the chain on the teeth. Vibrations are avoided and the smoother running of the chain is not only noticeable when pedaling, but is also expressed acoustically through a quieter drive. Thanks to a new chromed surface in combination with the proven SIL-TEC coating, the service life of the chain could be kept at the level of the M8000 chain, despite the smaller outer width. Battery BT-DN300 internal Integrated battery of the latest generation, which is sunk into the seat post or the steerer tube. The internally routed cables give the racing bike a tidy look. The integration of the battery into the frame also reduces the number of attachments that are exposed to the wind. To charge the battery, it can remain in the bike. E-Tube cable SHIMANO for Di2 | EW-SD300-I internal These cables connect all electrical components of the Shimano E-Tube system. They are used in the current Dura Ace Di2 9200 and Ultegra 8100 groupsets, among others. The more compact design allows the use of smaller, lighter electronic components and makes it much easier to route cables internally. SHIMANO charging cable EW-EC300 With this charging cable you can charge the battery of your Shimano 12-speed gears via the charging port on the rear derailleur. Technical specifications: Material: aluminum, plastic Gears: 2x12 Brake type: hydraulic disc brake Brake Mount: Flat Mount, depending on the frame, an optional adapter may be required at the rear Crankshaft: 24mm Chainring mount: 110 mm 4-arm | Shimano asymmetrical Cassette gradation: 11-30/34 teeth Compatibility freewheel body: Shimano 11-/12-speed Road Fastening front derailleur: soldering (clamp optionally available) Battery life: about 2000 km Scope of delivery: 1x SHIMANO Ultegra Di2 switching | Brake lever ST-R8170 2x12-speed + disc brake BR-R8170 Flat Mount front 1x SHIMANO Ultegra Di2 switching | Brake lever ST-R8170 2x12-speed + disc brake BR-R8170 Flat Mount rear, WITHOUT 160 mm adapter 1x SHIMANO Ultegra crank FC-R8100-P | 2x12-speed Powermeter 1x SHIMANO Ultegra Di2 front derailleur FD-R8150 | 2x12 speed 1x SHIMANO Ultegra Di2 rear derailleur RD-R8150 | 2x12 speed 1x SHIMANO Ultegra cassette CS-R8100 | 12-speed 11-30/34 1x SHIMANO Deore XT | Ultegra chain CN-M8100 12-speed | 126 links with chain lock 1x SHIMANO battery BT-DN300 internal 1x SHIMANO E-Tube cable for Di2 EW-SD300-I | 600mm 1x SHIMANO E-Tube cable for Di2 EW-SD300-I | 1200mm 1x SHIMANO charging cable EW-EC300

Price: 1899 USD

Location: Bergum

End Time: 2025-01-01T15:54:54.000Z

Shipping Cost: 0 USD