Description: Sheartak Spiral Cutterhead for DeWalt 20V MAX XR® BRUSHLESS CORDLESS PLANER DCP580N Woodworkers are now retrofitting spiral cutter heads to their old planers, and jointers for the following advantages. Smoother Finish with no tear-out. Each knife sits at a slight angle and it produces a shear cut. Spiral cutter head planes board in a staggered cut which is much better than a single straight cut. The combined shear and staggered cut eliminates tear-out and leaves a glossy surface finish on even highly figured hardwood. Noise is hugely reduced as the spiral cutter head allows a few knives to cut in a staggered way. More than 10 times the life use of high-speed steel. The 15x15x2.5mm inserts are made of sintered tungsten carbide which is much harder than high-speed steel. Each insert has four edges. Easy to change. The knives are precision ground to a tolerance of +/-0.0004" or +/-0.01mm and are interchangeable. Loosen the screw, rotate 90° for a new edge, and tighten the insert in minutes. It cuts your production time by 30%. Dust extraction is easier. The spiral cutter head produces thinner and shorter chips. Low cost to use. Spiral cutter heads produce a smooth finish, reduce or eliminate sanding work, don't require sharpening, the product will pay for itself in a very short time.
Price: 146 USD
Location: Waterloo, ON
End Time: 2024-11-30T16:39:44.000Z
Shipping Cost: 25 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: SHEARTAK
MPN: S014382
Number of Blades: 14
Item Weight: 1.34
Item Height: 10
Item Length: 14
Item Width: 14
