Description: DESCRIPTIONBoride T2 series stones are made of aluminum oxide and use a very strong bond. As a result, these stones are high performance and their wear rate is below average. Boride recommends T2 at the best series for working with stainless steel. The T2 series is the most popular among all Boride series for Hasptone sharpening. Many customers buy entire sets of the T2 series. T2 400 grit is included in Boride stone bundles.Boride Sharpening Stones are used for sharpening knives on Hapstone sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride stones are made of aluminum oxide, with the exception of CS-HD series stones, which are made of silicon carbide. All Boride stones are 6 mm thick and are mounted on high quality aluminum blanks. Stones that are 6 mm thick offer a longer life cycle than stock Edge Pro stones that are 3 mm thick and are becoming a community standard.If you are not sure what to buy for your knife sharpeners, buy Recommended Boride set with 5 stones. SPECIFICATIONProduct size: 160 x 25 x 9 mm (6" x 1" x ⅓")Working surface: 152 x 25 x 6 mm (6" x 1" x ¼")Weight: 83 g (1.6 oz)Abrasive: Bonded Aluminum Oxide or Silicon CarbideExtra materials: Aluminum Blank, 3M PSA HOW TO USEBoride stones should be used with one of these lubricants:WaterSoapy waterBoride Bori-LubeWater solution of dipropylene glycolWD-40 (for experienced users only)Refined olive oil (for experienced users only)Oleic aсid (for experienced users only)In case of using the water as lubricant, soak the stone in water for 1-2 minutes. In case of using the oil, put a small amount (1-2 drops) of honing oil on the stone’s surface and spread it evenly over the stone with a finger. If the stone absorbs the honing oil, use larger amount of oil.Boride Stones may have the following minor defects:Saw strokes on the work surfaceResidues of lacquerSmall chips at the corners and along the edges (no larger than 1 mm)All these defects will be eliminated during preparation of the stone. The majority of sharpening stones requires preparation, and Boride stones are no exception. Additional lapping can be performed by customer to improve sharpening quality. We recommend to use loose silicon carbide powder or diamond lapping plate.
Price: 30.4 USD
Location: Zaporizhya
End Time: 2025-01-08T15:26:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Boride
MPN: Does Not Apply
Model: Sharpening Stone Boride T2 FEPA
