RUD CHAIN 7101316 Hoist Ring, 0 Pivot 360 degree 7050 lb. 3200Kg VRS Starpoint

Description: RUD CHAIN 7101316 Hoist Ring, 0 Pivot 360 degree 7050 lb. 3200Kg VRS Starpoint 24mm NEW VRS-F-M24 New, Working Load Limit (WLL) of 7050 LBS or 3200 Kg. This is for one (1) hoist ring. See picture for dimensions. Thanks for looking!! VRS Eye bolt can be adjusted to the direction of pull. Higher load capacities than DIN 580-Eyebolts.Attention:DIN 580 standards do not allow lateral load lifts with eye bolts unless the eye bolt is positioned in the direction of pull – this requirement can be facilitated with RUD Starpoint eyebolts.Hoist Ring, Mounting Style Screw-On, Series VRS, Pivot 0 Degrees, Swivel Angle 360 Degrees, Working Load Limit 7050 lb., Bail Dia. 1-7/8", Thread Size M24 x 3, Standards DIN EN ISO 12100 T1 and T2, EN-1677, Includes Tightening KeyItemHoist RingMounting StyleScrew-OnSeriesVRSPivot0 DegreesSwivel Angle360 DegreesWorking Load Limit7050 lb.Bail Dia.1-7/8"Thread SizeM24 x 3StandardsDIN EN ISO 12100 T1 and T2, EN-1677IncludesTightening KeyUNSPSC24101602Rud Chain Hoist Ring, 0 Pivot, 7050 lb.Load Cap. - 7101316Hoist Ring, Mounting Style Screw-On, Series VRS, Pivot 0 Degrees, Swivel Angle 360 Degrees, Working Load Limit 7050 lb., Bail Dia. 1-7/8", Thread Size M24 x 3, Standards DIN EN ISO 12100 T1 and T2, EN-1677, Includes KeyFor the tool - less assembling, the STARPOINT is supplied with an annealed star - profile - key. Simply engage the Hexagon socket bolt with the star - profile - key and use your fingers to respectively tighten or untighten the arrangement . Disengage the key. The VRS is rotatable!Product profile Vario-Starpoint VRS-F-M24 with star key Star shaped design, a clear distinction from the DIN 580 eye bolt. With a striking fluorescent pink powder coating. Identification: Clear WLL indication for the most unfavorable load direction F (not permissible for DIN 580). Forged material 1.6541, high tensile and annealed, 100% electromagnetic crack detected according to EN 1677-1 and with a 4 :1 design factor. Work piece material, at least 1.0037 (St 37). For light metals, nonferrous heavy metals and grey cast iron, the thread type allocation must be done in such a way that, the WLL of the thread type fulfils the requirements of the respective work piece. Ensure an appropriate bore depth to facilitate an optimal sitting of the engaging surface. Without an additional washer, screw the VRS into the work piece until the seat - engaging surface of the Hexagon socket bolt evenly lies on the surface of the work piece. If the VRS permanently to remain at the point of force introduction, it must be tightened with a torque of 190 Nm. The thread bore countersink is equal to the effective diameter of the thread. Always pay attention that the Hexagon socket bolt is tightened. When impact loaded or operated in environments with skewing and vibrations, unintentional loosening can happen, especially if through bolts with nuts are used. Securing possibilities: Use of a liquid thread securing medium eg. Loctite ( follow the manufacturer`s recomendations) In a tightened condition, the VRS must be able to swivel up to 360°. Before loading, adjust the VRS to the direction of the applied force. A captive Hexagon socket bolt. The VRS is patent protected : GM 9402014 - and further industrial property rights are registered under GM 9316475. For the tool - less assembling, the STARPOINT is supplied with an annealed star - profile - key.Simply engage the Hexagon socket bolt with the star - profile - key and use your fingers to respectively tighten or untighten the arrangement . Disengage the key. The VRS is rotatable! NOTE: If you are sending us an important message about your purchase in Paypal it is very easy to be overlooked. To ensure your note/request is received PLEASE follow-up with an eBay message. We ship so quickly that if you requested overnight shipping in Paypal we may have already have shipped it with some other method before the Paypal message is read. Sorry for the inconvenience but a small note on the bottom of a Paypal notification for an important request can be missed and we want to ensure that we provide the best service possible to satisfy you, the customer.

Price: 90 USD

Location: Chardon, Ohio

End Time: 2024-05-23T16:16:42.000Z

Shipping Cost: 7.2 USD