Cane Creek

ROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE a

Description: Gearbox INPUT: 1-3/8" 6 SPLINEOUTPUT: 1 1/2" 12 SPLINE RATIO: 1:1:47 MOUNTING PATTERN (4) 5/8" HOLES - 6 3/4" PATTERN 5" CENTERROUND STYLE GEARBOX40HP RC300 BRAND NEW GREAT QUALITY FROM THE DISTRIBUTOR THAT SUPPLIES TO ALMOST EVERY IMPLEMENT MANUFACTURER This is a universal box that will fit every brand Gearboxes are not brand nor model specificCheck all specifications and ask for more if you feel like you need prior to ordering ****The gearbox is shipped without oil for shipping purposes*** It takes 80-90 gear oil. A plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted on the cutter and in an upright position. Prior to each use always check the oil lever--an empty gearbox will fail SKU: 87855 Before finalizing your purchase please review eBay’s return policy. In addition, returns will not be accepted, unless the product is returned within 30 days and is in its original condition unopened, unused, undamaged packaging and tag must still be attached. Buyer is responsible for return shipping. Any damage claims must be accompanied by photographs and/or the damaged product being returned to seller. In some cases, a signed affidavit detailing the circumstance may be required.*We strive for 100% satisfaction. If you are not satisfied with your product, please send us a message prior to opening a return or case*

Price: 287.6 USD

Location: Farmington, Missouri

End Time: 2023-12-28T20:54:10.000Z

Shipping Cost: N/A USD

Product Images

ROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE aROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE aROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE aROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE aROUND STYLE GEARBOX 40HP 1:1:47 4 BOLT PATTERN INPUT 6 SPLINE OUTPUT 12 SPLINE a

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Model: RC300 40HP

Compatible Equipment Make: Universal

Model Year: 2021

Type: Gearbox

Equipment Type: ROTARY CUTTER

Part Type: Final Drive Gearbox

MPN: 87855

Brand: AGMATE

Compatible Equipment Type: Rotary Cutter

Recommended

12" Furrower Point (Middle Buster/Potato Plow)  3/16" Thick, 9-1/4 Cutting Width
12" Furrower Point (Middle Buster/Potato Plow) 3/16" Thick, 9-1/4 Cutting Width

$39.00

View Details
Cutter Tail Wheel AND Hub Assembly Bush Hog 15" Wheel 4 Bolt Hub 3/4" Shaft c
Cutter Tail Wheel AND Hub Assembly Bush Hog 15" Wheel 4 Bolt Hub 3/4" Shaft c

$124.88

View Details
3 Hole Box Blade Shank 16" Long Ripper Heat Treated Points NEW LOT OF 5   c
3 Hole Box Blade Shank 16" Long Ripper Heat Treated Points NEW LOT OF 5 c

$133.88

View Details
TAIL Wheel Fork For Rotary Cutter HEAVY DUTY 1.5" Yoke 3/4" Axle NEW  c
TAIL Wheel Fork For Rotary Cutter HEAVY DUTY 1.5" Yoke 3/4" Axle NEW c

$56.88

View Details
Rotary Cutter Blade 24 3/4" Long 1 1/2" Bolt Hole Italian Made Bush Hog 5'   c
Rotary Cutter Blade 24 3/4" Long 1 1/2" Bolt Hole Italian Made Bush Hog 5' c

$40.88

View Details
ROTARY CUTTER BLADE PAN 15 SPLINE STUMP JUMPER 90572 Brush Hog Replacement NEW c
ROTARY CUTTER BLADE PAN 15 SPLINE STUMP JUMPER 90572 Brush Hog Replacement NEW c

$148.88

View Details
Cutter Tail Wheel & Hub Assembly Bush Hog 15" Wheel 4 Bolt Hub 3/4" Shaft c
Cutter Tail Wheel & Hub Assembly Bush Hog 15" Wheel 4 Bolt Hub 3/4" Shaft c

$123.88

View Details
ROTARY CUTTER BLADE PAN HUB 15 SPLINE WELD IN FOR STUMP JUMPER (15-006)
ROTARY CUTTER BLADE PAN HUB 15 SPLINE WELD IN FOR STUMP JUMPER (15-006)

$42.99

View Details
PTO Shaft 39" TO 52.5" 6 SPLINE 1 3/8" Smooth 1/2" Shear Bolt 89803 POWER TAKE c
PTO Shaft 39" TO 52.5" 6 SPLINE 1 3/8" Smooth 1/2" Shear Bolt 89803 POWER TAKE c

$138.68

View Details
3 Hole Box Blade Shanks 16" Long Ripper Heat Treated FAST SHIP LOT of 4    c
3 Hole Box Blade Shanks 16" Long Ripper Heat Treated FAST SHIP LOT of 4 c

$95.88

View Details