RisingCam Color 8.3mp imx715 sensor USB3.0 astronomical telescope guide camera

Description: RisingCam Colorful Ultra high sensitivity imx715 1/1.8" USB3.0 8.3mp astronomical telescope camera astronomy camera for guiding Color sensor Camera's protect window default install IR-Cut Filter 380-690nm (optioal:double-side AR coating Protective glass 350-1050nm) RisingCam can change IR-Cut filter and AR coating glass for buyer, buyer could leave message tell us want IR cut filter or AR coating glass when place order, if buyer not leave any message, we will make camera by our default setting. RisingCam G3M camera is Guiding CMOS camera and it adopts ultra-high performance CMOS sensor as the image-picking device. USB3.0 is used as the data transfer interface. A built-in ST4 auto guider port is designed for the easy connection of the auto guider. Aluminum CNC housing with standard 1.25 inch interface(outer) to fit to telescope eyepiece and standard C-mount(inner) for standard industrial lens. Native/ASCOM/WDM driver for easy connection with 3rd party astrophotography softwares. The G3M camera can be widely used in astrophotography (Moon, Sun, Planets as well as Galaxies, Cluster and Nebulae). Camera Feature The G3M715C camera possesses an exceptionally strong capability to capture infrared light (with a high QE value at 850nm). It also has a large full well capacity, high dynamic range, high sensitivity, and low readout noise among other advantages. This results in outstanding performance in planetary photography, as well as in solar and lunar photography. The features of G3M715C are listed below: Camera installed Sony IMX 715 color CMOS Sensor Resolution: 3840 x 2160 1.45 um Square Pixels 1/1.8-inch Optical Format 12-bit ADC 512 Mbyte Memory G Sensitivity: 2375mv with 1/30s Low Noise: 0.57 to 1.35e- Support High Frame Rate Mode (47 FPS at all Pixel Readout 8 bit) SNR Max: 37.7 dB Dynamic Range: 72.8 dB Camera Specification Sensor Sony IMX715 back illuminated sensor Diagonal 6.39mm Image Resolution 8.3mega pixels (3840*2160) Pixel Size 1.45mmx1.45mm Image Area 7.7mmx4.3mm Max FPS at Resolution (USB 3.0) 12bit 8bit 24FPS @ 3840*2160 70FPS@ 1920*1080 47FPS @ 3840*2160 70FPS@ 1920*1080 Max FPS at Resolution (USB 2.0) 14bit 8bit 1.9FPS @ 3840*2160 3.9FPS @ @ 1920*1080 3.8FPS @ 3840*2160 7.9FPS @ 1920*1080 Shutter Type Rolling shutter Exposure Time 0.1ms – 1000s Gain 1x – 100x SNR 37.7dB Dynamic Range 72.8dB Read Noise 1.35– 0.57 e- QE Peak >91% Full Well 6.0ke- ADC 12bit DDR3 Buffer 512MB (4Gb) Connection Port USB3.0/USB2.0 Camera Adaptor Standard1.25’’ for telescope connection, and standard C adapter for industrial lens Protect Windows IR-cut filter or AR glass-window Spectral Range 380-690nm (with IR-cut filter) 380-1100nm (with AR glass) Capture/Control SDK Windows/Linux/macOS/Android Multiple Platform SDK(Native C/C++, C#/VB.NET, Python, Java, DirectShow, Twain, etc.); Recording System Still picture and movie Camera Dimensions Diameter 37mm * height 72.4mm Camera Weight 70 gram Back Focus Distance 17.5mm with C adapter, 12.5 with CS adapter Cooling: Passive cooling Supported OS Microsoft®Windows® XP / Vista / 7 / 8 /10 (32 & 64 bit) OSx(Mac OS X) Linux OTHER HARDWARE CONFIGURATION Spectral Range 380-690nm with IR-cut filter (Optional: 350-1050nm with Double Side AR Coating Protect Window ) White Balance ROI White Balance/ Manual Temp-Tint Adjustment Color Rendering Technique Ultra Fine Color Engine Recording System Still Picture and Movie Guilding Port ASCOM ST4-port Cooling System* Natural with High Performance Cooling Structure OPERATING ENVIRONMENT Operating Temperature -10C--50C Storage Temperature -20C--60C Operating Humidity 30~80%RH Storage Humidity 10~60%RH Power Supply DC 5V over PC USB Port SOFTWARE ENVIRONMENT Operating System Support Microsoft Windows XP / Vista / 7 /8/10 (32 & 64 bit) OS X (Mac OS X), Linux PC Requirements CPU: Equal to Intel Core2 2.8GHz or Higher Memory: 2GB or More USB port: USB2.0 High-speed Port Display: 17" or Larger CD-ROM Camera Detailed pictures Camera installed Sony IMX 715 color CMOS Sensor Resolution: 3840 x 2160 1.45 um Square Pixels 1/1.8-inch Optical Format 12-bit ADC 512 Mbyte Memory G Sensitivity: 2375mv with 1/30s Low Noise: 0.57 to 1.35e- Support High Frame Rate Mode (47 FPS at all Pixel Readout 8 bit) SNR Max: 37.7 dB Dynamic Range: 72.8 dB Sony IMX715 Sensitivity The sensor G Sensitivity of G3M715M is 2375mv with 1/30s. Its spectral sensitivity is shown in Figure 1. The sensitivity is measured with a testing standard lens with CM500S(t = 1.0mm) as an IR-cut filter and image at F8.0. If the image is measured at F5.6, the result could have been 2 times of the current value. 12bit ADC and ROI The G3M715C has built in 12bit ADC. It also has 12bit output mode for hardware binning and smaller resolution. The camera also supports hardware ROI, and the smaller the ROI size is, the higher the frame rate is. Table shows the frame rate of the G3M715C in 12/8bit mode, USB3.0 / USB2.0 data transfer interface at different resolutions: Table G3M678C Frame Rate at Different Resolution/Data Bit/Data Transfer (USB3.0/ USB2.0) Bit & Interface FPS Resolution 12bit ADC 8bit ADC USB3.0 USB2.0 USB 3.0 USB 2.0 3840* 2160 24 1.9 47 3.8 1920*1080 70 3.9 70 7.9 DDR3 Buffer G3M715C camera has a 512MB (4Gb) DDR3 buffer, which helps maintain the stability of data transmission, and effectively reduce the amp-glow caused because image data can be temporarily buffered without being sent hastily to the receiver. Binning The G3M715C supports digital binning from 1x1 to 8x8 in either stacking or averaging method, and hardware binning from 1x1 to 2x2 in averaging method. Hardware pixel binning is much faster than software binning. Power System The camera operates via a USB3.0 interface. Upon establishing a connection with the host system using the USB3.0 cable, the device is primed for operation. ST4 auto guider port, USB3.0 Output ASCOM/WDM (DirectShow)/Native driver/INDI for easy connection with 3rd party astrophotography softwares Supported Software for this camera includes: NINA, PHD Guiding, Nebulosity,MaxIm DL, SharpCap, MetaGuide,Fire Capture, Astro Art, Registax, AstroStack, DeepSky Stacker, Kstars etc Our this camera support INDI INDI is a protocol for the control of astronomical equipment. It is an open source project that aims to provide a unified control interface for various types and brands of astronomical equipment. StellarMate supports INDI protocol, so you can use it to control various devices connected to StellarMate. Our this camera support StellarMate StellarMate is an astronomy equipment management software. It provides an easy-to-use interface to control telescopes, cameras and other equipment from a computer or mobile device. With StellarMate, you can automate imaging, shot time tracking, metering and exposure timing without manual intervention. StellarMate also includes astronomical image processing tools to help you process and adjust your data after imaging. Our this camera support StellarMate X controller StellarMate X is a compact and powerful Astrophotography Controller that supports numerous Mounts, Cameras, and other astronomical equipment. Powered by Open Source technologies and designed and built by Astrophotographer for Astrophotographers. It provides unparalleled freedom in selecting your favorite platform to remotely control your equipment. You can use Ekos astrophotography tool on Windows, MacOS, or Linux. Furthermore, use StellarMate App on iOS and Android to automate your complete astrophotography workflow Amp-glow Reduction Technology What is amp-glow reduction technology? Most sensor have amp-glow problem when you do long-time exposure , such as longer than 1s “amp glow reduction technology” is a hardware modification to reduce the amp-glow of sensor. The G3M Camera adopts Amp-glow reduction technology Amp-glow reduction test result of G3M Camera Camera work with astronomy telescope by OAG Camera Dimension The G3M camera body, made from tough, alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality AR Glass (Optiona: IR-Cut filter) to protect the camera sensor and block the IR elimination the relfection light. No moving parts included. These measures ensure a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions. Camera with 1.25" adapter RisingSky Software RisingSky is Professional software for Astronomical applications, which has multi-functions such as Camera parameter adjustment, capture images&video, modify image, process image etc. it can provide many tools choice for user. RisingSky Support Windows XP/7/8/10 system We also Provide RisingView software for MAC system and Linux system User. RisingView for MAC system RisingView for Linux system Sample Photo Astronomy Photo Sample Moon photo captured by G3Mcamera Jupiter photo captured by G3Mcamera Nebula photo captured by G3M camera Packing Photo Standard Camera Packing List A Carton L:50cm W:30cm H:30cm (20pcs, 12~17Kg/ carton, 0.045m3), not shown in the photo B Gift box L:15cm W:15cm H:10cm (0.8~1.0Kg/ box) C G3M series USB3.0 C-Mount camera D High-speed USB3.0 A male to B male gold-plated connectors cable /2.0m E 2.0m guide cable F 1.25 inch nosepiece G CD (Driver & utilities software, Ø12cm) CAMERA accessory picture USB3.0 Cable ST4 Guide cable 1.25inch adapter Warranty 1 year

Price: 265 USD

Location: Hangzhou

End Time: 2025-01-12T04:36:06.000Z

Shipping Cost: 0 USD