Description: Improved Racing's remote oil filter mount features a built-in thermostat to save both space and cost. Intended for use with an oil cooler, the internal thermostat ensures engine oil reaches safe operating temperatures quickly and prevents over-cooling. The ENV-171 is an evolution of Improved Racing's popular ENV-170 thermostatic remote filter mount and features the following improvements: The internal passages were enlarged for improved flow characteristics. Additional pocketing makes the ENV-171 12% lighter and the revised mounting points allowed the part to shrink in overall size. The revised mounting bracket design is significantly stiffer and stronger. The larger diameter oil filter flange can accept slightly larger oil filters than the ENV-170 (up to 3.55" diameter filter gaskets). New design is patent-pending. The thermostat valve is available in 185°F, 205°F and 215°F temperatures for use with engine oil. It's also available in 165° and 145°F ratings for use with transmission fluid. In most conditions, it will maintain oil returning to the engine or transmission at these minimum temperatures.This remote filter head features female -10AN O-ring boss threads. Fittings are available to accommodate -6AN, -8AN, -10AN and -12AN lines, or 3/8" and 1/2" hose (-10AN lines are recommended for most applications).This unit is available with an M20x1.50, M22x1.50, 13/16"-16, or 3/4"-16 filter screw (sold separately). The filter screw is machined from hardened 410 stainless steel, which is stronger and more durable than common grades such as 304 and 316. The extra sturdy mounting bracket is made from lightweight aluminum, and is Type II anodized for durability. Three different mounting orientations allow the inlet and outlet ports to be oriented universally for left-to-right or right-to-left flow. Features and Benefits Reduces excessive engine wear and horsepower losses while improving gas mileage by accelerating engine warm up and preventing oil temperatures from dropping below optimal levels. Oil flows through filter first (thermostat does not bypass the filter). Allows a small percentage (roughly 5%) of fluid to continually circulate through the cooler to eliminate air pockets and prevent cold fluid trapped in the cooler from shocking the system. Rebuildable. M20x1.50, M22x1.50, 13/16"-16, or 3/4"-16 filter thread bung is compatible with a wide range of filters. The maximum supported oil filter gasket OD is 3.44" and the minimum supported oil filter gasket ID is 1.91". Filter screw is machined from hardened 410 stainless steel for excellent durability. 6061-T6 billet aluminum construction with black MIL-A-8625 Type II anodized finish. Extra sturdy, lightweight black anodized aluminum mounting bracket with 3 different mounting allows for right-to-left or left-to-right flow. Female -10AN O-ring boss ports. Patent-pending design. Made in USA. Lifetime Warranty. Flow Diagram and Operation Three Mounting Bracket Orientations 6+ Fitting Sizes Available Optional 3/8" or 1/2'' hose barb, -6AN, -8AN, -10AN, or -12AN adapter fittings available Applications For use in remote oil filter applications where an engine oil cooler is also used. Not for use without an oil cooler. Compatible with M20x1.50, M22x1.50, 13/16"-16, and 3/4"-16 filter threads (filter thread adapter screw sold separately). Compatible with filters with gaskets up to 3.55" in outer diameter. Includes 1x Remote thermostat mount with integrated thermostat. 1x Aluminum mounting bracket and screws. 1x Aluminum backing plate and screws for reinforcing through-panel mounting applications. Recommended Oil Filter Part Numbers 13/16"-16 filter thread: Wix 51794R Wix 51060R Wix 51061R Wix 51069R Wix 51042XP Fram HP4 M22x1.50 filter thread: Wix WL7421 Wix WL10058 Fram PH3616 AC-Delco PF2156 Purolator L30248 Royal Purple 20-820 K&N HP-2010 Fram PH2 Purolator L24651 microGreen MG421-8 Fram HP19 AC-Delco PF26 Wix 51372 Wix 57899 Mobil 1 M1-210 Mobil 1 M1-212 Royal Purple 20-500 Wix WL7421 Bosch 3502 Purolator L22500 Fram PH10575 Mobil 1 M1-113 Royal Purple 10-48 Wix 57502 Fram HP18 * For a more comprehensive list of compatible filters, please see the documentation section. Required Parts Sold Separately Important: The parts below are sold separately. The filter thread adapter bung is required and must be purchased separately. Oil Filter Thread Adapter (REQUIRED) Choose the appropriate oil filter thread adapter bung based on your oil filter thread size: Filter Thread Size Part Number Qty Required 3/4"-16 HSC-5000-01 1 13/16"-16 HSC-5022-01 1 M20x1.50 HSC-5021-01 1 M22x1.50 HSC-5023-01 1 Optional Parts Sold Separately Line Adapter Fittings (Optional) Use these fittings to adapt the ports to the line sizes listed below. These fittings are required except when using hose ends with male O-ring boss connections. Note: Our fittings are required to guarantee compatitility with our products, as some aftermarket fittings may cause interference and improper function. Line Size Part Number Qty Required 5/16'' Barb OB-10-05 0-2 3/8" Barb OB-10-06 0-2 1/2" Barb OB-10-08 0-2 -6AN OM-10-06 0-2 -8AN OM-10-08 0-2 -10AN OM-10-10 0-2 -12AN OM-10-12 0-2 Inline Sensor Fittings (Optional) Use these fittings to add an inline sensor to any of the available ports. Line Size and Sensor Port Size Part Number Qty Required -6AN Male to -6AN Female, 1 x 1/8" NPT Sensor Port TR-06-02 0-4 -6AN Male to -6AN Female, 2 x 1/8" NPT Sensor Port TR-06-02-B 0-4 -8AN Male to -8AN Female, 1 x 1/8" NPT Sensor Port TR-08-02-A 0-4 -10AN Male to -10AN Female, 1 x 1/8" NPT Sensor Port TR-10-02-A 0-4 -12AN Male to -12AN Female, 1 x 1/8" NPT Sensor Port TR-12-02-A 0-4
Price: 299 USD
Location: Orlando, Florida
End Time: 2024-09-16T00:49:30.000Z
Shipping Cost: 9.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Brand: Improved Racing
Part #: ENV-171-T4
Country of Manufacture: United States
Color: Black
Primary Material: 6061-T6 aluminum
Inlet Port Size: -10AN O-Ring Boss Female
Outlet Port Size: -10AN O-Ring Boss Female
Oil Filter Flange Inner Diameter: 1.90" (48.3mm)
Oil Filter Flange Outer Diameter: 3.55" (90.2mm)