Redding Neck Die Set 223 Rem Type S-Match

Description: Redding Type S Match Bushing Neck Dies.The three die set contains "Type S Competition Bushing Style - Neck Sizing Die", "Body Die" and "Competition Bullet Seating Die". The Type S Competition Bushing Style Neck Sizing Die is a die for calibrating the bushing neck and punching out the neck. Bushings of different diameters are inserted into the die to achieve the desired dimensions of the sleeve neck. The dimensions of the bushings change in 0.001" increments. The die aligns the sleeve to the correct position before the neck is pressed, similar to the Competition Bullet Seating Die. Bushings are not included with the die. The Body Die crimps the sleeve body and shoulder to factory dimensions. This die does not adjust the sleeve neck. Competition Bullet Seating Die for accurate bullet seating. The depth of the ball can be adjusted in 0.001" steps, the "zero" position can also be set. The ball guide is on a spring, so it goes down to the ball and thus aligns it with the sleeve in the correct concentric position even before pressing. Due to the low tolerances of the die, the concentricity is incomparable with other dies The die does not have a crimp operation. Product is new, unused. Manufacturer Redding Made in USA Warranty 10 years SKU RED38111 Die operation Body sizing, Decapping, Neck sizing Pack size 3 die set Die type Bushing Bushing Yes Bushing style Type S - Match Bushning Neck Die Set Case body design Bottle neck Case type Rifle Sizing die material Steel Adjustment Micrometer Press compatibility Standard 7/8"-14 thread Bullet Diameter (mm). 5.6mm Bullet Diameter (inch). 223 Suitable for Calibers .223 Remington

Price: 449 USD

Location: Laporje

End Time: 2023-12-02T13:20:08.000Z

Shipping Cost: 15 USD