RDL STICK-ON ST-LCR1 LOGIC CONTROLLED MOMENTARY RELAY RADIO DESIGN LABS

Description: These units came from a Logic array in a church and were removed during rmodel. The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where additional switching contacts are needed to be added to nearly any type of control signal.Control Inputs:SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment's open-collector output turns relay on when open-collector is on. Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1. 5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied. 24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.Control Output:SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRsSwitching Contacts:Double-pole, double-throwMaximum Switching Power:60 W (220 Vdc, 125 Vac, 2 A)Ambient Operating Environment:-10° C to 55° CPower Requirement:GROUND-REFERENCED, 24 Vdc @ 50 mA * * Assumes 20 mA max load at SLAVE outputDimensions:Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), D...Package Type:Cardboard BoxPackage Dimensions:2 x 2 x 4 in.Shipping Weight:0.185 lbs.WEEE weight:0.135 lbs.Tariff code:8543.70.9860

Price: 19.99 USD

Location: Virginia Beach, Virginia

End Time: 2024-10-13T16:51:16.000Z

Shipping Cost: 0 USD