Qty 2 Strong Arm 4775 Fits Ramcharger 1981 to 1993 Hatch Lift Supports

Description: Qty (2) StrongArm 4775 Fits Ramcharger 1981 to 1993 Hatch Lift Supports Buy with Confidence, backed by our 5 Year Warranty! This Listing is for 2 Supports which fit the Following Applications: 1984-1990 Chrysler Town & Country Base Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Chrysler Town & Country Base Mini Passenger Van 4-Door Liftgate-W/O Rear Wiper 1984-1990 Chrysler Town & Country Base Wagon 3-Door Liftgate-W/O Rear Wiper 1984-1990 Chrysler Town & Country Base Wagon 4-Door Liftgate-W/O Rear Wiper 1984-1990 Dodge Caravan Base Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1989-1990 Dodge Caravan C/V Mini Cargo Van 3-Door Liftgate-W/O Rear Wiper 1989-1990 Dodge Caravan C/V Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1990 Dodge Caravan ES Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Dodge Caravan LE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Dodge Caravan SE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Dodge Grand Caravan Base Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1987-1990 Dodge Grand Caravan LE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1987-1990 Dodge Grand Caravan SE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Plymouth Voyager Base Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Plymouth Voyager LE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1990 Plymouth Voyager LX Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper 1984-1990 Plymouth Voyager SE Mini Passenger Van 3-Door Liftgate-W/O Rear Wiper Specifications (See below for illustration): Extended Length: 23.70 Inches Compressed Length: 14.30 Inches Force: 694 = 156 Lbs. Shaft End Fitting: Eyelet (.479 x .399 slotted hole) Body End Fitting: Eyelet (.479 x .399 slotted hole) --> Qty (2) StrongArm 4775 Fits Ramcharger 1981 to 1993 Hatch Lift Supports --> Actual Compressed Length 14.30" 23.70" Actual Extended Length Gas Charged Lift Supports are energy storage devices that create force by compressing gas inside a cylinder. Each support is tested to perform as well as the original units and, in many cases, to exceed the manufacturer's specifications. Important Notes about Lift Supports Each support is tested to perform as well as the original units and in many cases, to exceed the manufacturer's specification; please ensure you replace all the supports in the compartment at the same time to ensure proper performance. Lift supports loose pressure over time, even sitting on shelves in most auto parts stores and many of the inventory liquidators on eBay. Our business is lift supports, and we sell newly produced units, keeping our inventory fresh and rotated. Quite a few vendors on eBay are advertising Stabilus part numbers but with different vendor names. Please take a moment and be sure that what they are offering is the Stabilus. We stock several thousand different supports supplied by various quality manufacturers that are not listed here. We can build many units to your specifications if we don't have it. Don't hesitate to contact us with your requirements so we can research and find the best support suited to your needs. Special lengths, different pressures or ends, send us the information. Have an existing support with part numbers on it, and send us all numbers that you can find. We are confident our supports will exceed your expectations. Buy with Confidence, backed by our 5 Year Warranty! What is our Warranty on our merchandise? Depending on the product you are looking at, warranties will vary. Listed is our warranty on Lift Supports:Lift Supports for the Hood, Trunk, Hatch, Liftgate or Tailgate ( None Electrical types): Are covered with a Limited Buy with Confidence, backed by our 5 Year Warranty! A. Provided your original purchase was for a pair (unless your application only uses 1 lift support) B. These must be installed in the intended vehicle, and the unit stops working properly or to your satisfaction. Lift Supports for other Automotive applications other than Hood, Trunk, Hatch Liftgate or Tailgate and Non-Automotive applications, Tonneau covers, package delivery vehicles, vintage vehicles manufactured before 1980, All Electrical types and special projects are cover for 12 months. In the event the units stop performing after 180 days, then you would be responsible for shipping them to us and enclose a check for $13.90 per pair (for shipments inside the USA*) as well as proof of purchase from us to cover the return postage, and we will then send you the replacement unit. Please contact us for an RMA number before shipping the units. *Additional charges apply for international shipments as well as Puerto Rico, HAWAII, ALASKA & OTHER US TERRITORIES. Don't hesitate to get in touch with us for rates. THIS LIMITED WARRANTY DOES NOT COVER LABOR COSTS OR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOMMODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART This policy is subject to change without notice. To Avoid the need for a warranty, try to handle your supports as noted below. "Shaft down" is the preferred orientation for mounting a Lift Support. An optimum design would permit the support to be oriented shaft down through its entire actuation. If this is not possible, then try to install it so that the shaft is pointing downward in the Closed Position. There are several reasons for this: To achieve the damping or "cushion" at the end of the Lift Supports stroke, the piston assembly inside the Lift Support must travel through oil at the end of the stroke. "Shaft down" orientation ensures that the oil is in the proper location for damping to occur. "Shaft down" orientation ensures that the shaft and sealing components are lubricated with every stroke of the Lift Support. This reduces seal wear and helps to inhibit corrosion. Depending on the application, "shaft down" orientation may reduce the rate of gas permeation through the seal, which increases the usable life of the Lift Support. Some reasons not to change the support orientation. 1. Vehicles with power openers must be installed in the same direction as they came from the factory. Sensors on the door are adjusted to work in the way they were programmed. Installing in the opposite direction can cause them not to work properly. 2. Some models of vehicles do not allow space for the cylinder to be reversed, and this will cause a binding when the door or window closes. An example of this is the Ford Excursion Rear Window (or liftgate) Please remember that the more often a cylinder is used, the longer it will last. Sitting dormant for any period allows the shaft to bind to the seal and eventually tear. If the application remains dormant, open the lift supports very slowly the first time they are used. The information provided is Subject To Change Without Notice Worry Free Ordering, Buy with Confidence! Check-Out Now! Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now, eBay will notify you via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you can quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have 2 days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended before checking out. All of your purchases will be consolidated into one checkout! Payment Cancellation & Payment issues: Please notify us via e-mail as soon as possible. No issue is too small, and we ask that you contact us before the sale gets to the point where you are in default. Once you have placed your order, unless we know there is a problem, it becomes final and subject to eBay's unpaid item policy. Shipping Orders Within the 48 contiguous states will be shipped: Using FedEx or USPS at our discretion. Orders to Puerto Rico, Hawaii, Guam, Virgin Islands, and other US Territories: Will be shipped via USPS Priority Mail. (For items listed with free shipping, this does not apply to these areas) APO, FPO, DPO: Orders are welcome, and we will be shipped via USPS Priority Mail. International sales are welcome: They will be shipped via USPS Priority Mail. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery, and we cannot assume or cover any of these charges. Please research this before ordering. USPS Shipping Delays to International Destinations: In most cases, orders are delivered within 10 working days and are shipped via USPS Priority Mail. Due to customs and postal issues, orders may be delayed several weeks and up to 60 working days, and we have no control over how they are handled. Please ensure that all shipping details are supplied to your address and are correct in the confirmation sent to you after placing the order. Express mail and FedEx International shipments are available, and we will gladly quote current shipping rates. Duties, Tariffs, and Taxes to countries outside the USA may be billed upon delivery, and we cannot assume or cover any of these charges. Please research before ordering. Customer Service Contacting Us: The best way to let us know if there are any issues or concerns is to send us an e-mail using the "ASK A QUESTION" link at the bottom of this listing. To be able to assist you quickly, we ask that you supply the following information. A) The e-mail address under which the order was placed. B) Any and all numbers or markings that are on your old supports. C) The part numbers on the actual supports you received. (This is not the number on the package but the actual supports.) D) The year, make, and model of your vehicle and any important details such as Convertible, with or without spoiler, or anything you think would be helpful. Photos of the issues are also great. Returns and Exchanges: If the return is due to an error in our listing, we will pay all shipping to correct the problem. If the return is due to an error on your part, you will be responsible for the return shipping and shipping for the correct units. If an exchange is necessary, please get in touch with us for an RGA number and return shipping address. Any items received without authorization are subject to delays and may not receive proper credit. If the product looks different than expected, do not install it; rather, contact us with the details so that we can make sure it is correct. Our return period is 30 days from the date you received the order, so please get in touch with us as soon as you see any issues. Products that have been damaged during installation or altered will not be accepted. Once a return is received and inspected, we will refund or exchange the item depending on what is worked out when the RGA number was sent to you. Normal handling is 2 business days from receipt of the item. Refunds will be applied to whatever the original payment method was. It may take several days to post to your account. Lost Or Damaged Packages: When a package is received damaged, open, or lost in transit, we must be notified within 7 days to work with the shipper to correct the issue.

Price: 39.95 USD

Location: Brownsburg, Indiana

End Time: 2024-11-08T09:55:10.000Z

Shipping Cost: 0 USD