Pure Sine Wave Inverter 8KW~12KW DC 48V to 120/240V AC Low Frequency Split Phase

Description: product DescriptionGS Series InverterGS Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and automatic transfer switch into a complete system. The most common use of this inverter is for emergency backup power or off-grid systems for residential, business and remote power needs.GS inverter is a low frequency pure sine wave DC 48V to AC 220V all-in-one inverter. The electrically integrated solar inverter includes an 8KW 10KW and 12KW DC 48V to 120/240 volt AC split-phase pure sine wave inverter and two 60A MPPT solar charge controllers, as well as an AC charger to DC battery charger and an automatic transfer switch, making it ideal for your off-grid solar system.With its reliable and intelligent design, the GS series solar inverters can be used for complex appliances. Not only for common appliances such as TVs computers, lights and fans, but also for inductive loads such as refrigerators, air conditioners, motors, pump compressors and laser printers.Important Safety WarningBefore using the unit, read all instructions and cautionary markings on: (1) The unit (2) the batteries (3) all appropriate sections of the manual.This Inverter Support 2x60A MPPT Solar Charger ControllerThe maximum solar charging current :2x60A=120AThe maximum charging current : 200A (2x60A MPPT+80A AC Charger=200A)Rated charge current:60ARated Battery voltage:48VDCInput voltage range:50-160VdcMax. PV open circuit array voltage:150VdcMax. recommended input power (W) :3500WYou can disable the inbuilt solar controller, connect with external solar controller, or use for other systemsIt is not limited for solar systemAppliances in a home operate on AC current. Solar array generates DC current. A solar charge controller regulates DC power from solar arrays to charge the batteries. Batteries function as the “bank” where excess renewable energy is deposited and then later withdrawn when needed. An inverter is required to convert DC current from the renewable source to usable AC current for appliance and other home powering needs.Because there is variability in the renewable source, a generator is often incorporated into the system to charge batteries when needed. As the output of most generators is AC, an AC charger is needed to convert AC to DC for the purpose of charging the batteries. Essentially, off-grid solar inverter will regulate PV generation, convert power from DC to AC for consumption and AC to DC for charging.Included ComponentsInverter *1User Manual *1Unit Weight: 106lbs/48kgSize: L x W x H: 24.7 x 16.4 x 8.05 inch / 627.5*416.5*204.5mm12KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240VAutomatic Generator Starting (AGS)when low battery voltage or no utility. Support 2x60A MPPT Solar Charger Controller.5 stages adjustable AC charging current. AC charging also can be closed.1 x 60A MPPT Solar Charger Controller, The Max Input Power is 3500W. 2 x 60A MPPT Solar Charger Controller, The Max Input Power is 7000W.8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）.5 stages adjustable AC charging current. AC charging also can be closed.Powerful Charge Rate Up to 200Amp, Selectable From 0%-100%.Built-in transfer switch and battery charge, backup or off grid power solutions.AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration.4-step Intelligent Battery Charging, PFC for Charger.Smart fan adjustment(The fan automatically adjusts the wind speed according to the ambient temperature).Remote control line can be connected (without accessories, optional accessories if needed).GS Series hybrid Inverter is designed to serve as a backup power supply for AC loads.The input power of GS Series hybrid Inverter comes from PV system and AC grid which not only supply power to AC loads but also charge the battery bank when the power from AC grid or AC generator is present (also known as Line Mode).In the event of AC grid (or AC generator) outage, the AC loads can be alternatively powered by PV system (if the illumination is sufficient) and battery bank.Earthing(ABYC standard)Inverter mode: the neutral and the earth joined.Line mode: the neutral and the earth separated.Use a Relay to realize the function.Smart fan AdjustmentThe fan automatically adjusts the wind speed according to the ambient temperatureLow Frequency Split Phase48 VDC input, 240V input VAC to 120/240V AC split phase output This low frequency unit is a combination of an DC to AC power inverter, battery charger and AC auto-transfer switch into one complete system.Inverter Output SpecificationsContinuous Output Power: 12000 WattsSurge Rating: 36000 WattsOutput Wave Form: Pure Sine WaveOutput Voltage: 120/240VacNominal Efficiency: 90% (Peak)Line Mode Efficiency: >99%Output Frequency: 50Hz / 60Hz ± 0.3HzTypical Transfer Time: 10msInverter Input SpecificationsNominal DC Input Voltage: 48.0VdcLow Battery Alarm: 42.0Vdc-44.0VdcLow battery Trip: 40.0Vdc-42.0VdcHigh Voltage Shut-down: 64.0VdcLow battery Shut-down Recovery:44.0 ± 0.8VdcHigh battery Shut-down Recovery:62.0 ± 0.8VdcIdle Consumption: 230 WattsNominal Input Frequency:50Hz / 60Hz (Auto detection)Charger SpecificationsOutput Voltage: Depends on battery typeBattery Initial Voltage for Start Up: 40-62.8VNominal Charge Current:48VDC model: Max 50AOver Charge Protection:Bat. V ≥61.0Vdc, Fault, Buzzer alarm for 48Vdc

Price: 1547.1 USD

Location: Los Angeles, California

End Time: 2024-09-18T03:26:24.000Z

Shipping Cost: 0 USD