Professional Lift Kit set for Toyota Highlander 3 XU50

Description: Item content: ✅Front steel spacers (50mm (1.8 Inches) Lower the upper strut mount when raising the suspension by 50 mm with camber compensation for the Toyota Highlander 3 generation. • Front strut spacer 50 mm offset - 2 pcs, material steel, polymer coating. • M10 nut - 6 pcs., zinc-coated. • Locking washer D10 - 6 pcs. zinc-coated. • Plastic plug - 2 pcs. Installed on the original front struts, without knocking the bolts out of the native support, without the use of long bolts. The spacers are made with an offset, which allows to compensate the front wheels camber angles during the suspension elevator, see photo. Install with arrows outward - towards the fender (wheel). ✅Spacer over the rear spring (50mm (1.8 Inches) • Spacer over the rear spring Toyota XU50 50 mm - 2 pcs, material - polyurethane. Install on OEM Toyota rebound 48049-0E011, 48048-0E011, 48048-0E030, 48049-0E030. Before installing the spacer, the 48257-0E020 upper anti-squeaking gasket must be removed. Allows you to leave the original 48231-0E200, 48231-0E390 rear springs and keep the suspension "soft". Spacers are made of high grade polyurethane SCU-PFL-100 Shore a hardness 93A (International Standard ISO 868) ✅Rear Shock Absorber Brackets (40mm (1.6 Inches) Transfer the brackets of the rear shock absorbers, with a suspension lift of 40-50 mm. • Rear shock absorber bracket Toyota XU50-R 40 mm - 2 pcs. • Nut M10 - 4 pcs. material steel, zinc-coated. • Washer d10 mm - 4 pcs. zinc-coated steel. Remove the original upper mountings 48516-0E010, 48517-0E010 of the rear shock absorbers. Install this bracket on the two studs as shown in the photo. Install the two spacer washers from the kit on the rear stud. Install the factory shock absorber mount on the studs of this bracket and the rear stud. ✅Stabilizer adapter kit (40mm (1.6 Inches) Stabilizer strut brackets, with a suspension lift of 40-50 mm. • Adapter for front stabilizer 40 mm - 2 pcs, material steel, zinc coating. • Adapter for rear stabilizer bar 40 mm - 2 pcs, material steel, zinc coated. • Bolt M12x35 - 4 pcs, material steel, zinc coating. • SNK nut M12 - 4 pcs, material steel, zinc-coated. • Washer d12 mm - 4 pcs, material steel, zinc-coated. Install the adapters on the standard mountings using the bolts and nuts from the kit, as shown in the photo. Install the stabilizer rods on these adapters. Weight of entire set: 5.62kg. This complete lift kit is compatible with this cars: USA / World:✅Toyota Highlander (XU50), 3 Generation, SUV & Hybrid, Years: 03.2013 - 02.2016, Body: ASU50, GSU50, GSU55, GVU58 ✅Toyota Highlander (XU50), 3 Generation Restyling, SUV & Hybrid, Years: 03.2016 - 07.2020, Body: ASU50, GSU50, GSU55 Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Delivery: Handling time - up to 5 business days.We use the Kazakhstan state mail kazpost.kz for free shipping policy. Also we can offer you expedited shipping options such as DHL.;In fact, delivery takes from 2 to 4 weeks in 95% of cases...in previous years, but now, in 2020 due to the Corona Pandemic, the delivery time has greatly increased and takes 4-10 weeks. We recommend paying extra for faster, more reliable shipping methods. Regarding orders from exotic countries where delivery is complicated, or customs may request additional information, we specified the maximum delivery time; Note: Order cancellation due to "change your mind" is accepted only in the first 12 hours after your payment, Then order cancellation is impossible;We accept the return of goods with the following conditions: the Goods must be in original condition (no damage). Refund - only after we receive the goods. Delivery is paid by the buyer; If you received the item with damage - contact us and we will discuss the compensation.The product is made of plastic and may be scratched during delivery or storage - this is not damage! It must be painted before installation! Have a nice day!

Price: 340 USD

Location: Almaty

End Time: 2025-01-28T17:32:06.000Z

Shipping Cost: 0 USD