PM-30MV BENCH TOP VERTICAL MILLING MACHINE, FREE SHIP!

Description: PRECISION MATTHEWSPM-30MV VERTICAL BENCH TYPE PRECISION MILLING MACHINE FREE SHIPPING!(stand is not included in listing, please check our other listings if you need the stand.)(You are bidding on a brand new machine in the crate, the one in the pictures was just set up for pictures)This machine uses 220V Standard Power! Highlights Of This Machine that set it apart from others on the market:MUCH Larger Travels and work areaQuill DRO Included Standard (This is for the spindle up/down movement) 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling – Much improved over the single bolt mount typeMain Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range.001″ Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately – (One line on the dial is .001″, one full turn of the handwheel is .100″, much easier to use than those with odd metric conversions)50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speedsPrecision ground ways for smoother movements – Not just rough milledThrust Bearings in leadscrew ends – not bushings – Much smoother movements and less backlashSplit nuts on X and Y Axis to allow for backlash adjustmentDC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped)3 Year Warranty, for added peace of mind Standard Equipment1. PM-30MV Milling Machine2. Chip Tray3. Variable Speed with Belt Drive and Brushless DC Motor4. Way Cover Set5. Drawbar6. R8 Spindle Taper7. Quill/Spindle Depth DRO8. Spindle Locking Wrench Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Shipping costs on these is FREE!. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh. International shipments are subject to additional Customs and Brokerage fees, calculated at checkout.Quality Machine Tools 1060 Montour West Industrial ParkCoraopolis, PA 15108. Parts are easy to come by, we fully support these machines and the machine comes with a 5 year warranty on all parts, so you don't have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.Main Specifications of model PM-30MV Milling Machine:Model No. PM30MV (DC Brushless Motor,and Belt Drive Head is Standard)Max. Drilling Capacity 1-1/4″Max. End Milling Capacity 3/4″Max. Face Milling Capacity 3-1/2″Table Size 8-1/4″ x 33″Cross Travel (Y Axis) 8-3/4″Longitudinal Travel (X Axis) 23″Table Leadscrew Pitch 10 TPI (.100″ Per Turn)Table Dial Graduations .001″Vertical Travel (Z Axis) 14″Max Distance Spindle to Table 17″Taper of Spindle R-8, w/7/16-20 Drawbar ThreadSpindle Travel 3″T Slot Size Actual size 14mm, our 9/16″ kit listed is sized for this machineRange of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be)Headstock Tilt Left & Right ±90°Motor 2 HPNet Weight (Not Including Base) 530 LBSNet Weight (With Base) 605 LBS (630 LBS with base w/leveling feet)Country or Origin: ChinaPower Required 220V, Single Phase, 10 AmpCord Connection/Type: Cord approx. 5′ length, User to supply plug needed for your outlet (20A 240V With Ground, No Neutral Required)Dimensions:Optional Stand Height: 28″ (Base w/leveling feet 32″)Bolt Pattern, Machine Base Mounting Holes: APPROX. 13-1/8”W x 15” Front to back, with 1/2″ Holes. (we recommend waiting until your machine arrives before drilling any mounting holes in case this varies)Table Surface Height (On Stand): 36″ (with base w/leveling feet 40″)Height, Head at normal working height (W/O Stand): 39”Max Height, Head at top of travel (W/O stand): 48”Height, Head at normal working height (On Stand): 67” (on base w/leveling feet 71″)Max Height, Head at top of travel (On stand): 76” (on base w/leveling feet 80″)Width, Tip to Tip of table handles: 46-1/4”Dimension Front To Back, from back of chip pan, to front table handle tip: 31” (Can be pushed back against a wall, and table handle tip will be 31” from wall)We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.If you have ANY questions, feel free to message us.For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.Check out our other auctions for more lathes and mills. Our Part # PM-30MV

Price: 3599.99 USD

Location: Pittsburgh, Pennsylvania

End Time: 2024-10-10T19:05:45.000Z

Shipping Cost: 0 USD