Pet Dog Screen Door Doggy Door with Magnetic Flap Lockable Dog Door for Slidi...

Description: Size: 12"W x 16"H Color: Black Give your pet access to the outside through your screen door, window and any other screened areas with the pet screen door. Installation is easy, your pets can easily push open the door. Simply push the latch down to lock the door and lift it up to unlock the door. Installation instructions: 1. Use a flat-head screwdriver or putty knife to separate the frame and the door so you have 6 parts (include 2 tabs). 2. Place the door frame on the screen, apply the glue to one side frame, then carefully cut out the screen against the frame. 3. Connect the flap with the cutting-out screen, used a closed fist to lightly hammer the two halves of the door together. 4. Apply the glue to the frame again further to strengthen the frame, take both pins of the flap in the hinge holes, and using the same pressing/clapping motion snap the frame together. 5. Use the retractable cable ties to fix the top 2 side door frames together to prevent fall down. 6. 2 tabs can remove to lock the door prevent pets go on and out. Pay attention to know before buying this pet screen door A: It didn't come with any glue, need you to buy; B: It didn't come with a screen, need you cut down from an existing screen; C: Two plastic tabs that push into a hole to lock the door; D: It did come with 4 zip ties to hold outer frame top and bottom. Pet screen door can make your dogs and cats go in or out freely enough without asking for your help to open the door, great for your pet potty break or playtime. Use a flat-head screwdriver to separate the door so you have 6 parts, 2 of door frames, flaps and locks. Inner Door flap didn't come with a screen insert, need to put this on a screen you already own, then cut down the screen against the frame and place it inside the flap. Comes with upgraded screws with nuts would hold the outer frame and flap to prevent the door from separating and falling. It's easier with two people to install. Swings both ways. Magnets slow the door down and stop it in place after 3-4 swings. you can lock the door to stop pets in and out, double-sided lockable. Inner door hole size: 11 x 13 inches; Outer frame size: 13.4 x 17.3 inches, need to be installed base on the pet's height, fit most breed cats and dogs, but not suitable for especially little kittens and puppies because this door may too heavy.

Price: 48.09 USD

Location: Brentwood, New York

End Time: 2025-01-15T17:07:59.000Z

Shipping Cost: 0 USD