Pascal Marani PDA530P 3-Channel Power Amplifier Module AUTHORIZED DEALER!!!

Description: Pascal Marani PDA530P Outstanding PerformanceHigh power output: 3 x 500W @ 4Ω 1 x 1000W @ 8Ω (BTL) + 1 x 500W @ 4Ω Switched-Mode Power Supply with PFC and auto voltage sensing Pascal Class D Amp Module - full bandwith PWM modulator with ultra low distortion Full protection circuitry including Over-Current, Over/Under-Voltage, Output DC and Over-Temperature Excellent sonic performance with 24bit high end converters coupled with 96kHz sample rateTop-grade DSP Engine5 band parametric equalization per input channel, selected as Bell, Low/High Shelving variable Q 7 band parametric equalization on Mid and High frequency per output channel, selected as Bell, Low/High Shelving variable Q 3 band parametric equalization on Low frequency per output channel, selected as Bell Crossover filters with slopes from 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee Adjustable Delay time up to 40 ms for input channels, and up to 20ms for output channels Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness functionDirect PC/Network ConnectionRs485 connection for system setup, monitoring and control via fully manageable remote PC softwareControl8 Preset Selection by using rotary encoder switch Security Lockout Power & Amplifier sectionNumber of Channels3Max Output Power @ 8 ohms3 x 250W 1 x 1000W (Bridge)+1x250WMax Output Power @ 4 ohms3 x 500W 1 x 1000W (4Ω BTL Mode selected) + 1x500WOutput CircuitryClass D - full bandwith PWM modulator with ultra low distortionOutput Voltage+/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded) THD @ Rated power 4Ω (1kHz)<0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power)Signal To Noise Ratio>120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load)Frequency Response20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power)Damping Factor>1000 (8Ω load, 1kHz and below)Power SuppliesSwitch mode power supply with PFC (Power Factor Correction) and integral standby converterOperating RangeUniversal Mains, 85-265VConsumption / Current draw and Thermal dissipation @ 230 V13W / -A / 44.3 BTU/h (Idle) 173W / -A / 143.4 BTU/h (I/8 max. power@4Ω) ProtectionsOver-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit ProtectionAnalog Input1 x XLR electronically balanced, +12dBAnalog Output1 x XLR electronically balanced (Link)AD & DA ConvertersCs42528 24bitFrequency Response (DSP)20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHzDSP & ProcessingDSP EngineMARANI M704DSP Resolution24bit (data) x 24 bit (coeff.),54bit accumulation registers, 96 bit precision on intermediate processing dataParametric Equalization5 filters per input channel; 3 filters for Low Frequency on output channel, 7 filters for Mid and High Frequency on output channel Filter TypeBell, Low/High Shelving Variable QFilter GainInput from -12dBu up to +12dBu by 0.5dBu resolution steps Output from -12dBu up to +6dBu by 0.5dBu resolution stepsCenter FrequencySelectable with 1Hz resolution step from 20Hz up to 20kHzBell Filter Q/BWQ from 0.5 up to 10 by 0.1 resolution stepsLow/High Shelving Filter Q/BWQ from 0.5 up to 3 by 0.1 resolution stepsCrossover Section HPF/LPFButterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1Hz Sophisticated Dynamic Loudness function m 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-Riley Output features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable knee Adjustable Delay time up to 40 ms for input channels, and up to 20ms for output channels Input channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness functionOutput RMS CompressorThreshold from-18dB up to +12dBu; Knee 0~100%; Ratio from 2:1 to 100:1; Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms (10ms resolution). Input Noise GeneratorWhite/Pink Noise, from -40dB to 0dBSlipt Band X-over(only High Band) Freq from 5kHz to 20kHz step 1Hz resolution, slope: bypass, 1st order butterworth and 2nd order Linkwitz-RileyDLFInput: On/Off Output: On/Off, attenuation from -6dB to 0dB, Q from 0.1 to 10 by 0.1dB resolution stepsDelay10 ms, 10.4us increment/decrement steps per channelGeneralUser Preset8Front PanelGAIN pot. -30dBu ~ 0dBu PRESET EQ 8 positions Rotary encoder switch Red LED (Power); Yellow LED (Link); Green LED (Signal presence) 1 x XLR female connector (Input) 1 x XLR male connector (Link Output) 2 x RJ45 connector (M-LAN Rs485) 2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white)Dimensions19.21“ x 3.15" x 5.98"(488x80x152mm) Weight, Net / Shipping6.09 lbs (2.76 Kg) / 8.83 lb (4 Kg) CALL 801-771-1820 with any questions!!!We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years. Go to SpeakersAndAmps.com to see!We have all the other major PRO Audio Speaker Brands and Models.We have many many more than you see here. We sell to Dealers as well.

Price: 889.95 USD

Location: Clearfield, Utah

End Time: 2024-12-04T23:30:50.000Z

Shipping Cost: N/A USD