OSD XMP300BT 2 x 300W Wireless BT Stereo Amplifier

Description: Product highlightsefficient, bridgeable Class D amplifier 150 watts x 2 into 8 ohms @ 1% THD 300 watts x 2 into 4 ohms 600 watts when bridged into a single 8-ohm load auto-sensing turn on feature turns amplifier on when a source is detected frequency response: 20-20,000Hz signal-to-noise ratio: 90dB built-in USB DAC with 24-bit/192kHz resolution built-in Bluetooth 5.3 for streaming from phones, computers, tablets, and more Connections and controls: dual RCA stereo inputs for connecting two separate sources priority "interrupt" input automatically switches to a second source when signal is detected rear-panel USB port for high-res audio playback from USB flash drives auxiliary RCA stereo output for sending signal to another amplifier outputs for two pairs of speakers A/B speaker switching switchable bridge, stereo, and auto-on modes auto-on allows manual or signal sensing power on/off front-panel volume and balance knob rear-panel bass and treble controls 3.5mm 12-volt trigger inputs and outputs for sending and receiving power-on signals AC power socket with 100V-240V input voltage range 16-7/8"W x 2-1/4"H x 11-9/16"D 7.05 lbs. warranty: 2 years What's in the boxBluetooth stereo amplifier 59" AC power cord (IEC 3-prong) 2 Rack ears 2" Bluetooth antenna Six 5mm screws QR Code for owner's manual About this itemWritten by Crutchfield's Athena H.Send audio to two pairs of speakers OSD's XMP300BT GEN2 is a highly efficient Class D amplifier that can be used to send clean, powerful sound to up to two pairs of speakers. The front panel has A and B selector buttons that let you choose which speakers you'd like to listen to. You can even have two sets of 8-ohm speakers playing simultaneously by pressing both buttons in. The amp is bridgeable, meaning it can deliver a single powerful channel of amplification to either the A or the B speaker output. Use a pair of the amps in bridged mode to send music to a pair of power-hungry outdoor speakers, livening up your pool party or barbecue. The front panel also has a volume knob and a balance knob for fine-tuning. Multiple source inputs You'll find two RCA source inputs on the rear of the '300BT. You can hook up anything that uses an RCA connection, like a CD player or an OSD Nero SRT1 GEN2 streaming audio player. Use the "main" input for the primary source you'd like to share between rooms. Its signal gets passed through a pair of RCA main outputs, for easy daisy-chaining to additional amplifiers. Use the secondary input for a "local" source. The amp automatically switches to your local source when it senses a signal. When it stops, the amp switches back to your main source. If you don't want to hook up more equipment, keep it simple by streaming Bluetooth audio from your phone or tablet. Or insert a USB thumb drive with your music library into the rear-panel USB port — the amp automatically switches to the USB drive as the main source.

Price: 314.99 USD

Location: Charlottesville, Virginia

End Time: 2024-12-14T20:20:10.000Z

Shipping Cost: 0 USD