Description: Reconditioned K0 CT70 Honda Carburetor. This is an OEM original, NOT a remake. Reconditioned unit that was originally installed on an early K0 series CT70 Honda. This unit had been in cold storage for years, and the barrel had become frozen to the slide. You can see from the pictures that some damage on the slide is evident. This will not affect the operation of the carb, as the slide was removed and dressed to work smoothly in the barrel, You may opt to utilize your original slide, which would work fine as well. New gaskets, o-rings and needles were replaced as needed after this unit being hydrosonically cleaned and gone through. New float (adjusted to factory 20mm spec), needle, seat and pin are installed. Also included is a new manifold o-ring and overflow hose. This unit is guaranteed and ready for use in your vintage machine. NOW PLEASE NOTE: Look at the photos carefully, especially the outer barrel height. This AT7B carburetor has a shorter barrel height than some of the other models. What this means is that you may need to get a shorter throttle cable if your original carb has a higher throttle barrel. Honda used no fewer than four different carburetor designs with the early CT70's. Free next day shipping (I usually ship the same day).
Price: 175 USD
Location: Nappanee, Indiana
End Time: 2024-08-28T00:59:41.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Honda
Engine Type: 4-Stroke
Choke Type: Mechanical
Type: Carburetor
Barrel Count: 1
