Orientek T45 Fusion Splicer Fiber Splicing Machine Fiber Optic Splicer

Description: Orientek Fusion Splicer T45 Splicing Machine Core Alignment 7s Splicing 【High Accuracy and Low Splice Loss】 -----Orientek T45 Fusion Splcier 7s fast splicing,18s highly efficient heating,4 high precision motors.Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss. 【All-in-one fixer】----Orientek T45 Fusion Splicer the all-in-one fixture meet fusion demands of multiple optical fibers,jumpers and rubber-insulated wires with a cladding diameter of 80～150μm. 【Intelligent heat shrink】----Orientek T45 Fuion Splicer with a detection unit is embedded in the heater.The heating function will only be enabled when the protection sleeve is put in the heater, to avoid mishandling. 【Pluggable lithium-ion battery of large-capacity】----Orientek T45 Fusion Splicer built-in pluggable lithium-ion battery of large capacity.It can be recycled use for 220 times （Splicing+ heating）after each full charge 【Ceramic V-groove and ceramic presser foot】----Orientek T45 Fusion Spliccer's Ceramic V-groove with high precision brings you convenientand accurate placement of optical fibers and makes cleanup easy. Industry’s First 3 Year Warranty We, ORIENTEK, stand by our products and pleased to provide you with full 3 year service Warranty for on all of our splicer & OTDR products. The warranty is only valid if purchased through an authorized ORIENKE distributor. 【Graphical interfaces and touch screen】----Orientek T45 Fusion Splicer uses entirely new GUI and touch screenin design.Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces. 【Portable Design】----Orientek T45 Fusion Splicer very Small size and light weight, the splicer is easy to carry and can be lift by one hand. 【Carrying case】----Orientek T45 Fusion Splicer's carrying case is novel in design and light in weight, has built-in compact working bench.Open or close the cover can turn it to a working bench Orientek T45 Fusion Splicer data sheet: Alignment method Precise core alignment and cladding alignment Applicable ﬁbersAny common optical ﬁbers.rubber-insulated ﬁbers and jumpers that meet requirements of ITU-TG.651~653,ITU-TG.655 and ITU-TG.657 Optical ﬁber diameter Cladding:80~150mm，coatinglayer:0.1~3mm Cuttlinglength 5-16mm(coated optical ﬁber diameter≤250μm);10mm(coated optical ﬁberdiameter：0.25~3mm)Fusion splicing consum ption(typical value) 0.02dB(SMF)；0.01dB(MMF)；0.04dB(DSF)；0.04dB(NZDSF) Retum loss Better than 60dBFusion splicing time (typical value） 7s Heating time(typical value) 18s Pulling force test 1.96~2.25N Thermal shrinkagetube 60mm，40mm and a series of thermal shrinkage tubes Graphical display High-performance 4.3 inch lcd Magniﬁcation time 320 times/88 times Fusion splicing record 10000 groups Battery capacity 11.1V，6800mAh，typical value oﬀusion splicing and thermal cycle is 330 times Battery servicelife Cycle charging times reach 300-500，can be replaced by customers Electrode servicelife Typical value is 4000 times，can be replaced by customers Construction lighting Built-in lights with high-brightness and wide lighting area Working environment Temp:-10~50℃；hum:0~95%RH,height above sealeve1:0~6000m Operation interfaces GUI graphical operation interfaces Extemal power AC:AC100~240V,60Hz,0~1.5A,DC:DC10~15v Extemal port USB/SD Dimensions 120mm(W)×130mm(H)×154mm(D),(without rubber anti-vibration pad) Weight 1.59kg(host engine).0.37kg(battery)

Price: 899 USD

Location: Nanjing

End Time: 2024-02-15T09:17:42.000Z

Shipping Cost: 0 USD