Newel Post Fastener, 3 1/2" Poplar Contemporary Molding

Description: Newel Post Fastener, 3 1/2" Poplar Contemporary Molding Product Details Manufacturer: Conifer Products, Inc. Part Number: 01641 Item Weight: 15.4 ounces Product Dimensions: 3.5 x 3.5 x 2.25 inches Item model number: Not a model number. Wrong description. Is Discontinued By Manufacturer: No Size: 3 1/2" Color: Poplar Item Package Quantity: 1 Number Of Pieces: 9 Batteries Included?: No Batteries Required?: No Date First Available: December 21, 2019 MADE IN USA - Easily Install New Posts or Use to Repair Old Posts Designed to cause downward pressure to post. Year after Year delivers a stored energy to prevent a post from loosening. Built-In cleats along the bottom edge prevent post shifting. Fast Installation (in most cases average time is 5 min. per post) This kit includes everything to install a 3 1/2" Newel Post. The 4Js Post Mounting System has been sold Nationally for the past 22 years through wholesale lumber yards, stair parts suppliers, and Home Centers. In this time, the product has been field proven by professionals and amateurs alike. Both have commented on the ease-of-use and strength. Recently the 4Js System was re-engineered to provide an even stronger installation. Although there are other post hardware kits on the market (several of which try to imitate our product), none has been as widely accepted as the 4Js System. This is a higher quality, far better engineered product than other in this market. From the zinc-coated hardware to the premium grade wood used in the moldings (accurate to within .01), it's a complete system. USA Manufactured and available in over 10 wood types, 2 molding styles and sizes to fit every newel post currently made. Installation is as simple as: 1) Positioning the 4Js brackets flush with the bottom of the post. Mark & drill the holes for the small screws on all 4 sides of post. Use the small screws to attach the 4Js brackets to the post. 2) Set post in desired location and mark & drill holes for large screws. Use large screws to attach 4Js brackets and post to floor. (Pro Tip: Because of the extreme downward force of the 4Js system, you can actually use them to move the plumb of the post by tightening one side more than the others. Shims (business cards work well) can also be used under the post if the floor is too far out of level.) 3) Apply glue to the corner faces of the moldings, place around post and then use masking or painters tape to hold the moldings until they dry. Use a slight stretching motion to pull the tape around the corner. This will result in a tight joint with no holes to fill.

Price: 38.23 USD

Location: US

End Time: 2025-01-01T01:14:08.000Z

Shipping Cost: 0 USD