Description: ATP Compression Tester Automotive Tool Petrol Gas Engine Compression Gauge Compression Tester Kit Professional Engine Cylinder Compression Tester Kit Product Description: Universal Compatibility - There are 4 sizes of brass adapters and 2pcs universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.Cylinder Compression Tester Kit- a professional tool to test the compression in gasoline engine, a perfect kit which includes everything you need for a fast & effective compression pressure testing of petrol, gas, and fuel engine cylinders for most spark plug types on cars, trucks, motorcycles, marines, ATVs, UTVs, snowmobiles, boats, & more.All-in-one Compression Tester Kit - 1x spring buckle gauge, 1x straight rubber cone end adapter, 1x curved rubber cone end adapter, 4x brass adapters with metric male fittings & O-rings: M10, M12, M14, M18; 1x extension hose (14" length).Wide Application - The engine cylinder compression tester tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression.Storage Case: The automotive engine cylinder compression tester is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.ATP Professional Petrol Gas Engine Cylinder Compression Tester Gauge Kit Auto ToolFeatures:There are 4 sizes of brass adapters and 2pcs universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.A professional tool to test the compression in gasoline engine, a perfect kit which includes everything you need for a fast & effective compression pressure testing of petrol, gas, and fuel engine cylinders for most spark plug types on cars, trucks, motorcycles, marines, ATVs, UTVs, snowmobiles, boats, & more.The engine cylinder compression tester is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.Specifications:Dual Range Gauge:0-21bar/0-300psiFour Fittings:M10*1.00MM; M12*1.25MM;M14*1.25MM; M18*1.50MM;Spark Plug AdaptersSize: 14mm&18mmPackage Included:1 x 300PSI / 20bar pressure gauge with quick coupler1 x 6" long straight push-on connector1 x 6" long curved push-on connector1 x 16" rubber resin hose with 14mm adapter1 x 10mm x 1.0 adapter1 x 12mm x 1.25 adapter1 x 14mm x 1.25 adapter1 x 18mm x 1.5 adapter1 x Instruction1 x Red storage caseInstruction:1.Run the engine to the normal operating temperature. Stop the engine, unload spark plug wires. Clean all spark plug wells if necessary.2.Remove the spark plugs and the air filter, set the throttle wide open position. Disconnect the ignition system. Press the compression tester push-on connector, or connect the right thread adapter to the hose and screw it into the spark plug hole(Hand tighten only, DO NOT tighten too much with a wrench). Connect the coupling on the gauge to the push-on connector or the hose. Make sure all connections are fully engaged.3.Crank the engine for at least 5 compression strokes. Wait for the pressure reading on the gauge stops at a certain value. Record the compression reading and then press the button（release valve）to relieve the pressure.4.Repeat the above procedures, each cylinder measures 2 to 3 times to ensure the measurement accuracy. The removed components should be put back in place after the operation, especially before engine running.5.Note to return the throttle plates to the closed position and reconnect the ignition system wiring.Safety Tips:1.Do not use equipment if damaged.2.Wear eye protection. Do not wear jewellery and tie back long hair.3.Tidy up all used tools and equipment and never leave them in, on or near engine.4.When not in use, place in protective case and store in a safe, dry and childproof place.5.Ensure that the adaptor is securely fastened to the hose to prevent possible separation when the adaptor is removed from the cylinder head.Wide Application:The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression.
Price: 23.99 USD
Location: Rochester, New York
End Time: 2024-01-27T11:22:15.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Branded
Type of Advertising: Sign
Color: Multi-color
Date of Creation: See Description
Theme: Gas & Oil
Original/Reproduction: Original
Country/Region of Manufacture: United States
California Prop 65 Warning: See Description
