Description: New Lot of 10 PCS. Blue Monster 70885 1/2" x 1429" Thread Seal TapeBlue Monster 70885 1/2" x 1429" Thread Seal Tape Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. It can be used on pipes carrying the following: Acids, concentrated (see precautions) and Acids, diluteAlcohols, GasoholAliphatic solvents, Aromatic solvents, Chlorinated solventsAmmonia, liquidCaustics, concentrated (see precautions)Compressed air, Steam, WaterCutting oilsDiesel fuel oilEthylene glycol, GlycerineFatty acidsHeating oils, KeroseneHydraulic fluids, Hydraulic oilsHydrogen, gaseous and liquid, Inert gases, gaseous and liquid Jet fuelKetones, Petroleum solventsLiquid Petroleum Gas, Natural gasMineral oils, Vegetable oilsNitrogen, gaseous and liquidSoap, liquid Specifications:Composition: 99.6% PTFE < 0.4%Pigment Color: BlueLength: 1429"Thickness: 0.0035" +/- 10%Density: 0.8g/cm3Elongation: >100%Tensile Strength: 15N / mm2Temperature Range: -450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500o F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used. PrecautionsNote: Keep Mill-Rose Blue Monster Thread Sealing Tape clean. Replace the clip on the spool after use. Store in a clean place. PTFE is virtually chemically resistant to all media, however there are a few exceptions. Alkali metals such as elemental sodium, potassium and lithium are to be avoided. These alkali metals remove fluorine from the polymer molecule. Extremely potent oxidizers such as fluorine (F2) and related compounds (e.g., chlorine trifluoride(CIF3) can be handled by PTFE, but only with great care. Since fluorine is absorbed into the resin, the mixture becomes sensitive to a source of ignition such as impact. Other media to avoid are 80% NaOH or KOH, metal hydrides such as boranes (e.g., B2H6), aluminum chloride, ammonia (NH3), certain amines (R-NH2), imines (R-NH) and 70% nitric acid at temperatures near the suggested service level. Do not use Mill-Rose Blue Monster Thread Sealing Tape on oxygen lines!Mill-Rose recommends Green Oxygen Tape for oxygen lines. For further safety details consult the Material Safety Data Sheet.Note: Mill-Rose also offers a Yellow Gas Line Tape where certain codes require it.Limited LiabilityThe information presented is in good faith, but no warranty is given nor are the results guaranteed. Since we have no control over the physical conditions surrounding the application of information herein contained, Mill-Rose disclaims any liability for untoward results. *** PRODUCT RECOVERY MANAGEMENT INC. IS REGISTERED IN AND IS THEREFORE REQUIRED TO COLLECT SALES TAX IN THE FOLLOWING STATES: FL, NC, NY, VA, & WY*** LEGAL DISCLAIMER:IN NO CASE SHALL PRODUCT RECOVERY MANAGEMENT, INC. (PRM), OUR DIRECTORS, OFFICERS, EMPLOYEES, AFFILIATES, AGENTS, CONTRACTORS, INTERNS, SUPPLIERS, SERVICE PROVIDERS OR LICENSORS BE LIABLE FOR ANY INJURY, LOSS, CLAIM, OR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING, WITHOUT LIMITATION, LOST PROFITS, LOST REVENUE, LOST SAVINGS, LOSS OF DATA, REPLACEMENT COSTS, OR ANY SIMILAR DAMAGES, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, ARISING FROM YOUR USE OF ANY OF THE SERVICE OR ANY PRODUCTS PROCURED USING THE SERVICE, OR FOR ANY OTHER CLAIM RELATED IN ANY WAY TO YOUR USE OF THE SERVICE OR ANY PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY ERRORS OR OMISSIONS IN ANY CONTENT, OR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SERVICE OR ANY CONTENT (OR PRODUCT) POSTED, TRANSMITTED, OR OTHERWISE MADE AVAILABLE VIA THE SERVICE.
Price: 47.24 USD
Location: Butner, North Carolina
End Time: 2024-05-11T18:15:08.000Z
Shipping Cost: 8.49 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Pressure rating: 10,000 PSI or 69,000kPa
Temperature range: -450°F to +500°F (-268°C to +260°C)
Tensile strength: 15N / mm2
Composition: 99.6% PTFE & < 0.4% Pigment
Color: Blue
Thickness: 0.0035" +/- 10%
Density: 0.8g/cm3
Elongation: >100%
MPN: 70885
Brand: Mill-Rose