NEW Immersion RC Vortex 180 Mini ARTF Quadcopter Racing Drone WHT FREE US SHIP

Description: Home About Us Returns Payment FAQs Contact Us Batteries Accessories / Connectors Wires (176) Batteries / Battery Packs (96) Chargers / Power Supplies (12) Car & Truck Acc. Accessories (Stands,Shocks,etc) (59) Bodies & Accessories (45) Electric motors /Speed Control (200) Engines & Accessories (148) Lights / Accessories (6) Transmissions / Gears / etc.. (76) Parts by Heli Align Parts (295) Blade Parts (899) DJI Parts (22) Esky Parts (11) GAUI Heli Parts (18) Heli-Max Parts (149) SAB (Goblin) Parts (7) Traxxas Heli Parts (18) Parts by Vehicle Associated Vehicle Parts (323) Axial Vehicle Parts (78) HPI Vehicle Parts (207) Losi Vehicle Parts (219) Misc. Vehicle Parts (132) Traxxas Vehicle Parts (555) Vaterra Vehicle Parts (188) Venom / Atomik Vehicle Parts (45) Paints Accessories (48) Airbrush Acc (7) Paint (7) Masks / Decals (7) Radio Acc. Accessories (131) Radio Systems (1) Receivers (24) Servo Accessories (106) Servos (55) Slot Cars Accessories (27) Slot Car Sets (5) Slot Cars (24) Trains Adhesives / Fluids / Tools (34) Buildings / Bridges / Tunnels (22) Figures / Track Accessories (82) Grasses / Trees / Scenery (38) Parts / Accessories (3) Trains / Tracks / Sets (10) NEW Immersion RC Vortex 180 Mini ARTF Quadcopter Racing Drone WHT FREE US SHIP Description Requirements: 3s-4s LiPo w/XT30 Connector, 4s 750mAh >45C recommended Compatible Charger CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!) Transmitter and receiver Video RX w/FPV Goggles or Screen (required for initial setup) Start with the best ARF 180-sized (182mm to be precise) quad, and turbo-charge it! The big brother of the popular Vortex 150, tuned for the track. The same highly-customized race-drone electronics, but with 4″ props, and custom XNova 1407-3500kV motors. The 150 was a lot of fun in confined spaces. The 180 is more at home on the track, incredibly fast and nimble, turns on a dime, and can give most 250-sized quads a run for their money. As with all members of the Vortex family, fully integrated flight controller, video transmitter, and of course a full-graphic OSD for PC-free configuration. Weight: < 270 grams with 500mAh 4s pack Power Requirements: 3s-4s LiPo, 4s 750mAh >45C recommended ESCs: Full Custom, 16A cont. 20A peak, rotorSENSE, OneShot125, OneShot42 Motors: Custom XNova 1407-3500kV Props: HQ 4″ bi-Blades Flight Camera: FatShark CCD (HS1177 Sensor & Chipset) Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!) Flight Time: Highly dependent upon battery, and flying style, 3-4 mins typical Note: Compatible receiver and display device required for initial setup and use, not included. Specs: Size (diagonal): 180mm (182mm to be precise) Frame: 2mm CF, with Aluminium Standoffs Motors: Custom XNova 1407-3500 ESC: 16/20A EzESC Gen3 ESC Features: OneShot125, OneShot42, MultiShot, rotorSENSE Flight Controller: STM32F303 based ('F3') Gyro: SPI Gyro, for 8kHz loop speeds OSD: Full Graphic Microphone: Integrated Touch'n'Race: Integrated Video Tx Power: 1mW - >600mW variable Pit Mode: Full Support Glitch Free Channel Change: Full Support Arms: 2mm Flat CF/Plastic Hybrid BlackBox: Optional Extra Rx Support: Native CPPM, S-Bus, Spektrum, XBus, SumD, SumH Rx Selection: Fully Automatic Internal Rx Support: SPM9645 (DSMX), SPM4648 (DSMX). XSR (FrSky), X4R-SB (FrSky, depinned) (1) Rx Installation: Internal Case: Foam Case Camera Mount: HD Support available USB Port: Yes LED Board: Integrated into PDB Lost Model Beeper: Yes Standoffs: Metal (all of them) FlightCam: FatShark 600TVL CCD (HS1177 sensor + chipset) Weight: <269.99g w/500mAh pack Fun-Factor Overload Coming in below 270 gram the Vortex 180 is not considered a ‘drone’ in many parts of the world. This allows the Vortex 180 Mini to be flown in many more places than its big brother the Vortex 250 Pro. Doors are opened to fly in a typical garden, or small park. A swing-set becomes a perfect power-loop target and garden furniture becomes a race gate, a new world of possibilities has just been opened up! Fusion2 + Tramp = Synergy The new ImmersionRC ‘Synergy’ flight controller integrates a full-graphic OSD and an onboard video transmitter based on the new Tramp HV design. Twin F3 processors ensure an 8kHz loop time and full support of BetaFlight 3.x. Factory calibrated power levels from 1mW -> 600mW, glitch-free channel changing, and a micro-power pit-mode ensure that the Vortex 180 will receive a warm welcome at any race event. The Synergy weighs in at a mere 6.41g, vs. the Fusion Gen2’s 10g, the latter without a video transmitter! Integrated Leading-edge 5.8GHz Video Tx The fully integrated ‘Tramp’ video transmitter has all the bells and whistles. Support for all standard FPV channels and power levels from sub-1mW to >600mW. Dynamic Power Control, introduced with the Vortex 250 Pro, is taken to a new level, pre-take-off power level may be dropped to sub-1mW while waiting on the starting grid, saving precious battery power, and keeping temperatures low. After a crash landing the power level is dropped to a minimum to preserve battery life during the search and to help with localization using a directional antenna. Integrated Touch’n’Race A TNR (NFC) antenna integrated into the side of the quad provides full support for the ImmersionRC Personal and Race Director’s wand. The latter enables additional channels for events with special spectrum use permissions. Setting your video transmitter frequency and power without touching the quad, greatly simplifying casual and race channel setup. No fiddly dip switches, no push-buttons and key-press sequences to remember and no guesswork. DSMX Video Transmitter Control Another first in the FPV world, ImmersionRC has teamed up with Horizon Hobbies to integrate video transmitter control into certain Spektrum(tm) radios. Quads using this feature power up safely in pit-mode, and after finding a free channel on the video goggles, the menu on the Spektrum radio may be used to select frequency band, channel, and power level. PitStick Mode for Simple Channel Changing When placed in this mode, the Vortex 150 Mini will power up with the video transmitter disabled, and will only start transmitting when instructed to by a the R/C transmitter. For mode 2 pilots, the right stick is used to select channels 1..8 using the extremes of stick movement. Up for CH1, Up-Right for CH2, etc. Lights! Music! Action!!! Ok, there is no music, we’ll leave that to the post-processing, but there are lights, and plenty of action! A set of RGB LEDs sit on the tail of the Vortex Mini shine through a light-pipe diffuser, ensuring visibility from a wide angle. Since Airgonay’s now-famous ‘Star Wars’ video, rear lights on mini-quads have become not a ‘nice to have’, but a ‘no fun without ‘m’. ‘Gen3’ 32-bit, 16-20A ESCs, with OneShot42 and 125 Custom 16-20A ESCs supporting all of the common standards provide regenerative braking, for crisp-responsive flight using CleanFlight, or BetaFlight. A 32-bit ARM processor runs each ESC, ensuring plenty of processing power to drive even the most fussy brushless motors. These third-generation ESCs include advanced de-sync detection critical for use with tiny brushless motors running at high rpms. Of course no ImmersionRC ESC would be complete without our innovative rotorSENSE, which programs prop direction with the flick of a finger. No more swapping motor wires. Full Graphic OSD, with EzOSD pedigree An on-board full-graphic OSD provides in-flight updates of critical parameters and sports a menu which allows all options to be programmed in the field using the R/C Tx and a set of goggles, or, alternatively, an LCD screen. A real-time interface with the flight controller enables artificial horizons, F-18 style displays and exchange of critical flight parameters. Automatic warnings for battery capacity, voltage, and remaining flight time keep the pilot updated before batteries are exhausted. Seven! 32-bit ARM processors There are not many quads out there with that claim to fame, especially not in the 150mm class… the Vortex 150 Mini, like its 250 and 285 sized big-brothers sports no less than seven 32-bit ARM processors, all working together for maximum fun-factor and reliability. A dedicated ARM for the flight controller, another for the full-graphic OSD, a third one to drive the RGB LEDs and support the TNR functionality, and finally four high performance ARMs for the custom ESCs. Custom OSD Layouts Several OSD layouts are included in the package: A classical EzOSD-type layout, with all critical parameters available on-screen. A Heads-Up display which would be more at home in a fighter-jet, with artificial horizon and altitude indicator. A Race layout, with just the critical parameters, tucked around the edges of the display. All OSD layouts include screen-center alerts for critical warnings, such as battery voltage, EzUHF Link Critical, etc. Physical meets Virtual ImmersionRC’s FPV Racing Simulator, LiftOff, has been used by many pilots to develop their skills without breaking a single prop. Since its introduction the simulator has steadily increased it’s feature set, now including all of the Vortex airframes, many race environments (including the famous Dubai World Drone Prix circuit), and recently a fantastic multi-player mode. Race against other pilots in multiplayer mode, create tracks with the track builder, and download tracks built by the community. The Vortex 150/180 Mini have joined their 285 and 250 brothers in this simulator. Shipping Most orders are shipped the same day (if you make our cut off time). Otherwise, all orders are shipped within 24 hours of receiving payment. Payment Payment is required within 7 days from the date you commit to purchase an item. After 7 days, an unpaid item case will be opened. Thank You! Returns You may return an item for a refund within 14 days from the day it was delivered. The buyer pays return shipping and must return the item in the same condition it was received. Details About This Item Brand New In Factory Packaging Manufacturer: Immersionrc Our Price: $199.95 & FREE SHIPPING In Stock And Ready to Ship Backed by Full Manufacturer Warranty Why Buy From Us? Free Shipping on Every Item! Who doesn't like free shipping? All orders are shipped the same or next business day! Our customer service is friendly and here to help you! We are an Authorized Dealer so you can be sure you are receiving a genuine product. © Copyright 2017 Nitro RC Hobbies. Rights reserved. eBay Store Design for

Price: 199.95 USD

Location: Ramsey, New Jersey

End Time: 2024-02-28T07:07:25.000Z

Shipping Cost: N/A USD