Miucoguier Compression Sleeve Puller Tool Ferrule Puller for 1/2" Compression...

Description: Miucoguier Compression Sleeve Puller Tool Ferrule Puller for 1/2" Compression Fittings to Remove Nut Ferrule of Pipe 03943 Corroded Frozen Supply Stops Compression Ring Removal Tool Plumbing Tools SPECIAL NOTE: When using the Compression Sleeve Extractor Removal Tool, we may encounter a slight dimensional error between the Compression Sleeve Nut and the Extractor Tool Bolt(or the Compression Sleeve Nut that needs to be replaced may be damaged), resulting in a less than 100% fit between the Nut and the Bolt. When this happens, please do not worry, it will not affect any disassembly or pulling operation. We can simply tighten the bolt to a depth sufficient to pull the compression sleeve out，No need to fully screw in bolts。Each product has been tested many times and is strong enough to pull out our compression fittings! [Coarse Thread Design]: Sleeve bolts with coarse thread design are suitable for: 4/5 - 5/6 nuts. Simply tighten the bolt to a depth (about 1.5") sufficient to pull out the compression sleeve without fully tightening the bolt. Easily disassembles and pulls out Excellent Durable Quality: This Compression Sleeve Puller Tool is made of high-quality materials, not only has excellent corrosion and abrasion resistance, but also in the extreme case of severe corrosion or freezing of supply stops, you can still easily turn the lever to remove the old compression sleeve from the pipeline smoothly. How to use：1. Remove old compression fitting or old angle stop. 2. Align the copper pipe nut with the threaded mouth of the puller tool and tighten. 3. Make sure the ferrule puller is properly aligned with the pipe, then turn the handle 10 turns. 4. As you turn the handle, the compression ring puller pulls on the compression nut and rings to remove the nut and rings. Easy Removal of Compression Sleeves: This compression sleeve puller is designed for removing compression sleeves and rings from copper pipes, easily removes compression sleeves without damaging walls or pipes, a must-have plumbing tool for your plumber's toolkit. the compression sleeve puller is for 1/2” compression fittings only. [Coarse Thread Design]: Sleeve bolts with coarse thread design are suitable for: 4/5 - 5/6 nuts. Simply tighten the bolt to a depth (about 1.5") sufficient to pull out the compression sleeve without fully tightening the bolt. Easily disassembles and pulls out. Say Goodbye to The Hassle of Leaking Pipes: The compression ring removal tool makes the process quick and easy, saving you a lot of time and energy. If you have any questions or problems after purchase ferrule removal tool, please feel free to contact us, we will be happy to serve you. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods:PayPalPlease pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

Price: 19.29 USD

Location: New York, New York

End Time: 2024-11-19T01:39:48.000Z

Shipping Cost: 0 USD