Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1M

Description: Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1Mm-10Mm/19Pcs) Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life.3 Steps Design for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic.This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit.19Pcs 135 Degree Split Point Drill Bits Includes :1mm(length:3.4cm) 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm(length:8.5cm) 5.5mm 6mm(length:9cm) 6.5mm 7mm 7.5mm 8mm(length:11.5cm) 8.5mm 9mm 9.5mm 10mm(length:13cm) [DIA 0.5mm Increments] . Product Description STROTON Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs) Why choose STROTON cobalt drill bits? The research shows that HSS with cobalt has a higher temperature resistance and Red hardness, a greater wear resistance(Hardness) and a higher heat treat response than HSS without cobalt . Red hardness, it causes the hardened steel to have an ability to maintain hardness at approximately 860-880 ℃.Higher Tempering resistance,it means to maintain a high hardness at high temperatures for an extended period of time.68-70 HRC,it means that the drill bits has 3X cutting ability and 2X durability.This drill bits set is made of Premium Cobalt (80,000 dollars per ton). M42 Cobalt 8% Alloy This drill bits set is made of Premium Cobalt (80,000 dollars per ton).Holds up better than generic high-speed steel,8% Cobalt gives high-speed steel more heat and wear resistance. 3 Steps . Design (3X-5X Drilling Efficiency) 3 Steps design tip starts drilling immediately with less force and eliminates "walking" across the work surface.Ideal for Stainless steel and Hardmetal,Hardwood,Aluminum,Copper,Plastic and Hardwood. Ideal for Metal and Hardwood Suitable for drilling Stainless Steel,Hard Metals,Aluminum,Copper,Plastic and Hardwood.The 3 steps design makes it accurately centered for woodworking jobs that require precision drilling.Also, the cobalt-containing design makes it perform even better in hardwood drilling. The drill bit should be perpendicular to the workpiece when used. Non-vertical use may cause the drill bit to break.Using a drill press with sufficient power will make drilling easier.Do not use the drill bit on a percussion drill.This Drill bit can not be used on glass, walls and concrete. Controling the drill speed from 200 to 1000 RPM would make it easier for you to drill holes on stainless steel. A high RPM does not improve drilling efficiency, but rather increases the heat between the bit and the workpiece, which may cause the bit to soften and the workpiece to harden.Drill diameter≤5mm，RPM（1000~700）5-10mm，RPM（700~350）10-15mm，RPM（350~200） Using cutting fluid will make the bit last longer. Add stainless steel tapping oil or engine oil to prevent the stainless steel from overheating and forming a very hard oxide layer.It also works adding some vinegar,soy sauce or water if you don't have engine oil. Measurement System Metric SAE (inch size) Metric Metric SAE (inch size) SAE (inch size) Cobalt M42 8% Cobalt 6% Cobalt M42 8% Cobalt 6% Cobalt 5% Cobalt 6% Cobalt Titanium Coated Size 1-10mm 19pcs (1/16"-1/2") 17pcs Small Package 4-32mm/15 Steps 1/16"-1/4" (13pcs) 1/4 inch Ideal for Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood （Sheet Metal）：Stainless steel , Iron plate, Aluminum,Ducts,Wood,PVC and Plastic Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood Stainless Steel,Hard Metals,Aluminum,Plastic and Hardwood Brand STROTON STROTON STROTON STROTON STROTON STROTON Type Right Hand Right Hand Right Hand Right Hand Right Hand Right Hand Material Cobalt Cutting Angle String 135 Degrees Finish Type Oxide Coated, Steel Brand STROTON Shank Type Straight Pattern Name 1-10mm (19PCS) Is Discontinued By Manufacturer No Package Dimensions 7.32 x 6.14 x 1.73 inches; 1.12 Pounds Shipping Fast shipping is very important for us. Our standard US shipping service is FREE. Your order will be shipped within 2-3 business days upon full payment received. Your order will be delivered within 2-3 business days after the handling time. We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Returns and payment We offer a 30 days return policy from checkout winning date. We allow only PayPal as payment methodFeedBack Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback If you have any problem with your order / any questions please before leave any type of feedback For any questions, using eBay contact system Please visit our eBay store to check out other items for sale!Thank you for shopping at our store.

Price: 51.99 USD

Location: Bell, California

End Time: 2023-12-29T14:30:26.000Z

Shipping Cost: 0 USD