Metal Silvery LightMate Film Camera Light Meter 30Â°FOV Digital Exposure Meter

Description: Description Metal Silvery LightMate 2R Film Camera Light Meter 30°FOV High Precision Chargeable Ambient Light Digital Exposure Meter Improvements: 1. The field of view of the metering lens has been adjusted from 35° to 30° for a more accurate metering angle. 2. Add a "magnetic filter interface" that can install filters such as incident light measuring spheres. 3. Update to "2nd generation Pinball Anti loosening Shoe Seat". 4. The metering button has been updated from a two-segment design to a simpler and more user-friendly "single-segment button". Installation Requirements: - The camera can manually control the aperture and shutter speed. - The camera comes with a shoe mounting interface. Description: - It is a light meter or exposure meter used to provide exposure parameters for film cameras. - Your camera needs to be able to manually control the aperture and shutter speed. - Based on your shooting creativity, use the aperture and shutter value provided by the exposure meter to create. - Firmware website: Lightmate.pro Basic Function: - Press type dial wheel. (Press the dial to switch between shutter priority and aperture priority, long press to enter ISO/system settings) - Two stage metering button. (Half press metering, long press continuous metering; full press on/off) - Single metering, automatic continuous metering, average metering. (Quickly switch multiple metering modes) - Aperture priority and fast priority modes. - Exposure compensation function. (Support step value +/-0.5EV, range +2EV ~ -2EV) - Light metering over range prompt. (Lower limit prompt Error Underexposure and upper limit prompt Error Overexposure) - Exposure combination reciprocity. (Quickly obtain multiple exposure combinations with the same exposure amount) - LED light prompts completion of metering. (Flashing prompt after metering is completed, can be closed in the menu) - Save settings and exposure parameters. (Remains unchanged after shutdown/restart) - Real time display of remaining power. - Customize the automatic shutdown time. (Default no operation for 30 seconds of dark screen ->automatic shutdown for another 2 minutes (can be adjusted in the menu) - Customize screen brightness adjustment. - Screen flipping display. (Adapted to cameras with cold shoe at the bottom. Eg. for Rollei 35 camera) Advanced Functions: - "Digital depth of field ruler". (Quick provision of depth of field information, switchable lens system (full, medium, large, half grid) and lens focal length) - "Digital ND filter" function. (Compensate for metering results after installing a light attenuation filter in the imaging lens) - Provide multiple dial interfaces one after another. (such as "classic numbers", "pointer simulation", etc.; this function will be added later through firmware updates) - Update the system firmware through USB-C. (Supports PC or MAC, recognized as a USB flash drive, firmware can be inserted!) Specification: - Light receiving method: reflected light - Light receiving angle: approximately 30 degrees - Sensing element: silicon photodiode array - Metering mode: aperture priority metering/shutter priority metering/EV metering - Light metering range (ISO100): EV-1.1 ~ EV21 - Photometric accuracy: ±0.1EV - Display range: Sensitivity: ISO1 ~ ISO8000 Shutter: 60s ~ 1/8000s Aperture: F1 ~ F64 EV: EV-1.1 ~ EV21 - Exposure compensation: EV-2 ~ EV+2 - Screen size: 0.96-inch OLED display/128x64 pixels - Battery type: built-in polymer lithium-ion battery 3.7V/110mAh - Charging parameters: Charging interface USB Type-C/voltage DC5V+10% maximum current 0.2A, charging time about 1 hour - Working temperature: -10°C ~ 60°C - Working humidity: 30% ~ 80% - Storage temperature: -20°C ~ 70°C - External dimensions: Excluding hot shoe: 38mm x 29.5mm x 14mm Including hot shoe: 38mm x 29.5mm x 18mm - Net weight: 26 Package Included: - 1 x Film Camera Light Meter - 1 x Screw Driver - 1 x User Manual Note: - The film camera is not included. - If you are not sure whether the camera can be installed, please send a picture of the camera shoe holder to customer service for consultation. Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay. Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding. Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund. Custom Duties & Taxes 1. It is buyers responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your countrys customs office and inform us what/how much should declare before shipping. Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please dont be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.

Price: 67.93 USD

Location: Shenzhen

End Time: 2025-01-25T02:07:28.000Z

Shipping Cost: 8 USD