Mercruiser Alignment, Gimbal Puller, Installer, Seal, Bellow Expander Tools

Description: Thanks for supporting an American/USA machine shop compared to the US sellers selling the china made tools on here. THIS IS FOR A NEW SET OF TOOLS: ALIGNMENT TOOL, GIMBAL BEARING DRIVER, GIMBAL BEARING PULLER, SEAL DRIVER, BELLOW RING DRIVER, HINGE PIN TOOL, BELLOWS EXPANDER TOOL, PLUS EYE BOLT TO HANG THE ALIGNMENT TOOL.ALIGNMENT TOOL. FOR USE WITH: DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL COBRA STERNDRIVES - VOLVO SX. MY ALIGNMENT TOOL IS A SOLID ONE PIECE, NOT 2 PIECES SCREWED TOGETHER (LIKE OTHER SOLD ON EBAY) THAT ARE GOING TO WIGGLE AROUND WHEN YOUR TRYING TO GET YOUR ALIGNMENT CORRECT.GIMBAL BEARING PULLER. (No Volvo SX) No more PIA hassles of slide hammer jaws not grabbing and busted knuckles. This tool makes pulling the bearing easy. We have big name Marina's using these.This blind hole puller locks into the inner race of the bearing.To pull you just turn the end of the tool with a wrench, Its that easy.Comes with instructions on how to use the tool.GIMBAL BEARING INSTALL TOOL. THIS WORKS FOR ALL BRAVOS, OMC COBRAS, ALL #1 DRIVES MADE FROM 1966 TO NOW INCLUDING PRE ALPHA(R), ALPHA 1 "MR" AND GEN 2.GREASE SEAL INSTALL TOOL.DRIVE SHAFT BELLOW SLEEVE INSTALL TOOL,(NOW IN BLACK MADE OF DELRIN). THIS INSTALLS THE ALUMINUM RING INTO THE ALPHA 1 GEN2, BRAVO, BLACKHAWK U-JOINTS BELLOWS.BELLOWS EXPANDER TOOL. This tool is designed to stretch out the exhaust bellow on Mercruiser Outdrives. Replaces: 91-45497A & 90360REAL HINGE PIN TOOL INCLUDED: REPLACES MERCURY PART NUMBER 91-78310 FOR ALL MERCUISER STRENDRIVES: ALPHA ONE, ALPHA ONE GEN TWO, BRAVO ONE, BRAVO TWO, BRAVO THREE, MC-1, R, MR.THIS SET HAS A MADE IN THE USA EYE BOLT THAT SCREWS INTO THE END OF IT SO IT CAN BE HUNG ON A WALL. WE HAVE OTHER BOAT PARTS, TOOLS AND BELLOW SETS W/ TOOLS IN OUR EBAY STORE AND OFFER COMBINED SHIPPING: Visit My eBay Store: Whoya ProductsGIMBAL BEARING INSTALL TOOL COMES WITH DIRECTIONS ON WHERE TO DRILL THE HOLE IN THE ALIGNMENT TOOL.PEOPLE HAVE BEEN ASKING IF THE ALIGNMENT TOOL CAN BE PRE DRILLED BEFORE BUYING. SORRY NO BECAUSE OF THE DIFFERENT COUPLERS .Free shipping is for the lower 48 US states.THIS IS A SOLID PIECE OF STEEL. THIS IS A LIFETIME TOOL THAT WILL LAST LONGER THEN YOU.THIS COMES WITH INSTRUCTIONS AND A PICTORIAL. THIS ALSO HAS HELPFUL TIPS INCLUDED TO MAKE IT EASIER. GREAT ITEM TO HAVE IN THE GARAGE/SHOP.THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING AND DRIVE.PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.FOR USE WITH DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA STERNDRIVES - VOLVO SX. THE DRIVE ALIGNMENT IS SUPPOSED TO BE CHECKED ANNUALLY AT MINIMUMEVERY TIME YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIRS. THIS ALWAYS SHIPS OUT NEXT BUSINESS DAY. MOST DAYS WE CAN GET IT OUT THE SAME DAY.WE HAVE THE BEST/FASTEST SHIPPING AND BUY IN CONFIDENCE AS WE HAVE A 100% FEEDBACK RATING.A TRACKING NUMBER WILL SHOW UP IN YOUR EBAY UNDER THE BOUGHT ITEM, YOU JUST CLICK ON THE NUMBER TO TRACK.THANKS FOR LOOKING/BUYING.

Price: 154.99 USD

Location: Vermilion, Ohio

End Time: 2024-11-03T14:16:10.000Z

Shipping Cost: N/A USD