Description: Item Description Working pressure: 0.02-1.1 MPa Operating temperature: 0-50 degrees Celsius (32-122 degrees Fahrenheit) Connection thread: G1/4 *The batteries initially installed in the air gauge are test batteries. The batteries may be dead upon arrival of the product or may run out earlier than normal. If the product does not start up when the power is turned on, replace the batteries. Feature: Lightweight and compact 1)Lightweight model weighing 113g, about 30% less than the current product (MAR). 2)Compact size that does not get in the way when attached to the spray gun. 3)Because it is a digital type, easy to adjust the air pressure and easy to check. Stable air consumption and pressure 1)By equipping the gun with a regulator, it is not affected by pressure fluctuations (about 0.2 MPa) between ON and OFF loads of the compressor, Painting is possible with a constant amount of pressure and air consumption. 2)Even if you are using multiple air devices from a single transformer. By turning on and off other equipment, the pressure and air consumption fluctuate, and the coating conditions are not stable, but the use of MARD allows spraying at a somewhat stable air pressure and air consumption. Difference between the air volume regulator The air volume regulator basically has a needle mechanism and adjusts the air volume by adjusting the gap through which the air passes. Therefore, the amount of air changes because the air passes through a constant gap in response to pressure fluctuations. On the other hand, with the diaphragm mechanism, the regulator tries to maintain a constant pressure against fluctuations in the original pressure, so there is no change in air volume. It is possible to spray at constant pressure, and the coating conditions are stable. Button cell battery type A safe design that turns the power ON when a pressure of 0.02 MPa or more is detected and turns OFF when the pressure is 0.02 MPa or less. If the energized state continues, the power will run out in about 2 weeks. If used 8 hours a day, the battery will run out in about 42 days. Button cell battery are easy to replace. Brand new and Never USED All our items are 100% AUTHENTIC and ORIGINAL! Shipping PACKING - we will pack your order very good, so you have to get it undamaged COMBINED SHIPPING - yes, we can do this International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Price: 76.28 USD
Location: Tokyo
End Time: 2024-09-07T03:08:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Accessories: Pressure Regulator
Manufacturer Part Number: MARD
Brand: Meiji
Air Inlet Size: 1/4in.
Warranty: No Warranty
Type: Air Spray Gun