MCAMPAS 1/2" Gas Regulator Fits Natural Gas And Liquefied Gas Interchange Pressu

Description: MCAMPAS 1/2" Gas Regulator Fits Natural Gas And Liquefied Gas Interchange Pressu Description : ➤▶ The 1/2 PSI gas regulator of the 102-B model is compatible with natural gas and liquefied gas valves. The valve inlet and outlet are both 1/2” FPT pipe thread. We have additionally equipped with brass 1/2" NPT conversion adapter-1/2" NPT male x 3/8" flare male. 1/2" NPT male x 1/2" NPT male thread. plus joint thread tape ➤▶ When the LPG gas regulating valve is used: LP inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55 kpa(10"w.c), and gas flow rate is 30L/min ➤▶ When the natural gas regulating valve is used: LP inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kpa(4"w.c), flow rate: 50L/min ➤▶ The air valve is set to LP state at the factory, and it is used when exchange to the NG gas valve. Please unscrew the 20.3mm diameter aluminum knob in the gas valve to switch the direction of the LP/NG copper shaft core. LP to NG or NG to LP conversion is simple, fast, and convenient, Compatible with two types of gas valves. ➤▶WARM TIPS ：Rated operating temperature of gas valve is-32°F-225°F (0°C-107°C)， Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator. And the gas pressure regulator will not turn off the flow of gas.

Price: 36.99 USD

Location: Multi locations

End Time: 2024-12-30T09:58:39.000Z

Shipping Cost: N/A USD