Maven Solid Surface Countertop Bonder - Epoxy-Acrylic Hybrid Adhesive

Description: Maven Solid Surface Countertop Bonder - Epoxy-Acrylic Hybrid Adhesive - Multiple Colors - Medium Set 10-15 minutes maven Solid Surface & Countertop Adhesive Bonder is a two-part MMA acrylic adhesive designed in the industry-standard 10 to 1 cartridge system, and available in a variety of popular colors. DAl surface adhesive is specially formulated for seaming and edging all popular solid surface materials: Corion, granite, quartz, quartzite, marble, wood, tile, stone, concrete, slate, soapstone, glass, steel, stainless steel, ceramic, porcelain, hard plastics, decorative laminates, and other countertops materials. This product gives the fabricator an excellent NON-DRIP non-sagging product with unsurpassed adhesion, consistent cure and high bond strength. The product has excellent UV stablility and inherently non-yellowing over time. It comes in a variety of colors (more than 20 color options, as well as custom color matching ability It does not need surface preparation or primer/priming. Set time (working time) 10-15 minutes Handling strength in less than 30 minutes Mixed Viscosity: Thixotropic, Thick Gel Please Note: These cartridges are designed to work best with a 50ml or 250ml cartridge 10:1 ratio Dispenser. We advise you use a 50ml or 250ml 10:1 ratio dispenser for all respective uses. If you do not have one, please check out our 10:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools as pictured, that you can use for fast small jobs. But the 250ml 10:1 ratio cartridges really need to use a 250ml 10:1 ratio Dispenser, they're just too big to effectively use without the dispenser. Key Features 10-15 Min Working Time (10 gm mass) Fast-Set MMA for most all countertop and solid-surface materials. Craftsman and Industrial uses Excellent strength and stiffness Excellent UV Resistance and Non-Yellowing performance over time Gap filling 0.75mm-3.0mm (.03in-.12in) Resistant to hydrocarbons, acids and bases. Susceptible to polar solvents. Operating temp: -50F to 250F (-45C to 121C) Mechanical PropertiesTensile Strength: 3200-4500 psiLap Shear Strength, psi: 2800-3800Modulus, psi: 130,000-175,000Chemical resistance: Excellent resistant to hydrocarbons, acids and bases; susceptible to polar solvents. Directions of applicationsWipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. Safety and handlingWear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once used keep the containers closed. Storage and shelf lifeStore this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℉ will reduce the shelf life. Maven Solid Surface Countertop Bonder - Epoxy-Acrylic Hybrid Adhesive - Multiple Colors - Medium Set 10-15 minutes maven Solid Surface & Countertop Adhesive Bonder is a two-part MMA acrylic adhesive designed in the industry-standard 10 to 1 cartridge system, and available in a variety of popular colors. DAl surface adhesive is specially formulated for seaming and edging all popular solid surface materials: Corion, granite, quartz, quartzite, marble, wood, tile, stone, concrete, slate, soapstone, glass, steel, stainless steel, ceramic, porcelain, hard plastics, decorative laminates, and other countertops materials. This product gives the fabricator an excellent NON-DRIP non-sagging product with unsurpassed adhesion, consistent cure and high bond strength. The product has excellent UV stablility and inherently non-yellowing over time. It comes in a variety of colors (more than 20 color options, as well as custom color matching ability It does not need surface preparation or primer/priming. Set time (working time) 10-15 minutes Handling strength in less than 30 minutes Mixed Viscosity: Thixotropic, Thick Gel Please Note: These cartridges are designed to work best with a 50ml or 250ml cartridge 10:1 ratio Dispenser. We advise you use a 50ml or 250ml 10:1 ratio dispenser for all respective uses. If you do not have one, please check out our 10:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools as pictured, that you can use for fast small jobs. But the 250ml 10:1 ratio cartridges really need to use a 250ml 10:1 ratio Dispenser, they're just too big to effectively use without the dispenser. Key Features 10-15 Min Working Time (10 gm mass) Fast-Set MMA for most all countertop and solid-surface materials. Craftsman and Industrial uses Excellent strength and stiffness Excellent UV Resistance and Non-Yellowing performance over time Gap filling 0.75mm-3.0mm (.03in-.12in) Resistant to hydrocarbons, acids and bases. Susceptible to polar solvents. Operating temp: -50F to 250F (-45C to 121C) Mechanical Properties Tensile Strength: 3200-4500 psi Lap Shear Strength, psi: 2800-3800 Modulus, psi: 130,000-175,000 Chemical resistance: Excellent resistant to hydrocarbons, acids and bases; susceptible to polar solvents. Directions of applications Wipe off and degrease the surface to be bonded. Use eye protection and gloves to avoid skin contact. Dispense a desirable amount of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with the specified work-life of this material and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. Safety and handling Wear eye protection and gloves. Harmful if swallowed. Keep it away from heat, flames. Keep out of reach of children. Once uséd keep the containers closed. Storage and shelf life Store this product in a tightly closed container in a cool and well-ventilated area. Product should not be frozen. Keep it away from any source of heat. Store the material in between 51℉ to 75℉. Continuous exposure above 75℉ will reduce the shelf life. × × × × × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask seller a question You might also like MixPac MAQ 05-16L Quadro Square 3.25-inch 16-element High-Efficiency Mixing Nozz Jensen Steel Straight 14-Gauge Dispensing Tips Olive (Push-On & Luer-Lock) - 1/2 Maven Replacement Parts - Female Cross-Fitting High-Pressure Brass Pipe Fitting: Leister Turbo Nozzle (ø 62mm), air outlet 110.582 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Perigee Direct Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 31.95 USD

Location: North Richland Hills, Texas

End Time: 2024-12-15T02:36:35.000Z

Shipping Cost: N/A USD