Maven Epoxy EA 505 - Fast Set 5-Min Epoxy-Thin-Medium Viscosity Translucent Clea

Description: Maven Epoxy EA 505 - Fast Set 5-Min Epoxy-Thin-Medium Viscosity Translucent Clear-1:1 ratio Maven Epoxy EA505 is a 2-part epoxy adhesive with a fast set time of 4-6 minutes. When mixed in equal volumes of resin and hardener, it reacts to give a rigid and tough bond. This product is translucent clear, non shrinking and gives fast adhesion. EA 505 is recommended to bond various materials like metals, glass, wood, FRP, concrete, stone and ceramics. It has a set time (working life) of 5 minutes, and handling strength can be achieved in about 15 minutes. Give excellent bond strength on various substrates. Please Note: These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively. We advise you use a 50ml or 400ml Dispenser for all respective cartridges. If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking dispenser adapters, as pictured, that you can use for fast small jobs. But the 400ml cartridges really need to use a 400ml Dispenser, they're just too big to effectively use without the dispenser. Key Features 5 minute Set Time / Working Time Handling Strength 15 to 20 minutes Thinner Epoxy formula, 8000-1000 cps Excellent General Purpose Fast-Set Epoxy Adhesive for Craftsman and Industrial uses Bonds to wide variety of materials Electrically Insulating (does not conduct) Excellent resistance to water and solvents Cured Product Characteristics Color: Light yellow -TranslucentWork life (10 gm mass): 5 minutesHandling strength: 15-20 minutesFull cure: 24 hoursMixing Ratio: 1:1 Operating temp: -40F to 180F (-40C to 80C)Shore D Hardness: 80-85VOC Content: 0.1% Properties of uncured material (Resin)Specific Gravity: 1.1Viscosity@25°C, cP: 8,000 - 14,000Color: Clear Properties of uncured material (Activator)Specific Gravity: 0.96Viscosity@25°C, cP: 10,000 - 18,000Color: Clear Tensile Strength: 1500 psi Elongation (Failure strain): 6-18%Chemical resistance: Excellent resistant to hydrocarbons, acids and bases and susceptible to polar solvents. Directions of applicationsWipe off and degrease the suface to be bonded. Use the gloves to avoid skin contact. Dispense a diserable amout of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with in 60 minutes and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. (For optimum strengths, surface preparation for the metals like sandblast, etching will be needed). Safety and handlingWear safety glasses and gloves. Contains mercaptan and amine accelerators. Do not breathe vapors. Keep out of the reach of children. Once used keep the containers closed. Storage and shelf lifeStore the product between 60-80℉. Shelf life is 15 months if stored as recommended. Maven Epoxy EA 505 - Fast Set 5-Min Epoxy-Thin-Medium Viscosity Translucent Clear-1:1 ratio Maven Epoxy EA505 is a 2-part epoxy adhesive with a fast set time of 4-6 minutes. When mixed in equal volumes of resin and hardener, it reacts to give a rigid and tough bond. This product is translucent clear, non shrinking and gives fast adhesion. EA 505 is recommended to bond various materials like metals, glass, wood, FRP, concrete, stone and ceramics. It has a set time (working life) of 5 minutes, and handling strength can be achieved in about 15 minutes. Give excellent bond strength on various substrates. Please Note: These cartridges are designed to work best with a 50ml or 400ml cartridge Dispenser, respectively. We advise you use a 50ml or 400ml Dispenser for all respective cartridges. If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval. If you prefer not to use a Dispenser, we have some 50ml kits that include hand tools or caulking dispenser adapters, as pictured, that you can use for fast small jobs. But the 400ml cartridges really need to use a 400ml Dispenser, they're just too big to effectively use without the dispenser. Key Features 5 minute Set Time / Working Time Handling Strength 15 to 20 minutes Thinner Epoxy formula, 8000-1000 cps Excellent General Purpose Fast-Set Epoxy Adhesive for Craftsman and Industrial uses Bonds to wide variety of materials Electrically Insulating (does not conduct) Excellent resistance to water and solvents Cured Product Characteristics Color: Light yellow -Translucent Work life (10 gm mass): 5 minutes Handling strength: 15-20 minutes Full cure: 24 hours Mixing Ratio: 1:1 Operating temp: -40F to 180F (-40C to 80C) Shore D Hardness: 80-85 VOC Content: 0.1% Properties of uncured material (Resin) Specific Gravity: 1.1 Viscosity@25°C, cP: 8,000 - 14,000 Color: Clear Properties of uncured material (Activator) Specific Gravity: 0.96 Viscosity@25°C, cP: 10,000 - 18,000 Color: Clear Tensile Strength: 1500 psi Elongation (Failure strain): 6-18% Chemical resistance: Excellent resistant to hydrocarbons, acids and bases and susceptible to polar solvents. Directions of applications Wipe off and degrease the suface to be bonded. Use the gloves to avoid skin contact. Dispense a diserable amout of adhesive using a dispensing dispenser. The nozzle sizes can be selected according to the desired bond thickness. Join the substrates with in 60 minutes and allow it to cure at room temperature. Do not disturb the parts during the curing process. Excess adhesive can be wiped off. (For optimum strengths, surface preparation for the metals like sandblast, etching will be needed). Safety and handling Wear safety glasses and gloves. Contains mercaptan and amine accelerators. Do not breathe vapors. Keep out of the reach of children. Once uséd keep the containers closed. Storage and shelf life Store the product between 60-80℉. Shelf life is 15 months if stored as recommended. × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Paying via Direct Deposit Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase. Additional Information No additional information at this time Ask seller a question Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Perigee Direct Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 31.95 USD

Location: North Richland Hills, Texas

End Time: 2024-10-28T20:29:37.000Z

Shipping Cost: N/A USD