MakerFocus DC-DC Buck Boost Converter, 5.5-30V Input to 0.5-30V Output 6A...

Description: MakerFocus DC-DC Buck Boost Converter, 5.5-30V Input to 0.5-30V Output 6A 60W High Power Voltage Step Up Down Module, Adjustable Power Supply Regulator with Acrylic Case, LCD Display Product Details Package Dimensions : 4.41 x 2.68 x 2.05 inches; 3.53 ounces Item model number : BEGC278X11QM517GHA64CQ Manufacturer : MakerFocus Country of Origin : China Brand: MakerFocus Power Source: Battery Powered Current Rating: 6 Amps Manufacturer: MakerFocus Input and Output: Boost buck converter can raise or lower the voltage. Input voltage range 5.5-30V, output voltage range 0.5-30V; output current 6A, output power 60W, operating frequency: 180KHZ. With LC filter, output ripple is small Easy to Operate: With two long-handled potentiometers, which can be operated with bare hands without the use of any tools. "CC" is the current setting potentiometer, clockwise rotation, can increase the set current, when the load current reaches the set current, enter the constant current state, red lights up; "CV" is the voltage setting potentiometer, clockwise rotation, can increase the output voltage Safety Protection: The input terminal has reverse polarity protection, reverse connection will not burn; output anti-reverse irrigation, no need to add additional anti-reverse diode when charging the battery; over-current protection, over-power protection, over-temperature protection Application: The module can be used as a lift voltage module with over-current protection; as a battery charger; as a high-power LED constant current driver module or other purposes LCD Display: With display to show input and output voltage, temperature, output current and output power. Short press IN/OUT button to switch input voltage, output voltage and module temperature, long press to switch output current and output power display Function:1. IN/OUT button: short press to switch input voltage, output voltage and module temperature display, long press to switch output current and output power display;2. ON/OFF button: short press to control the output ON or OFF, long press to set the default output status ON or OFF for the next power-up;3. CC is the current setting potentiometer, turn clockwise to increase the set current, when the load current reaches the set current, it will enter the constant current state, and the CC constant current indicator (red) will light up;4. CV is the voltage setting potentiometer, clockwise rotation, can increase the output voltage, ON indicator is the output status indicator, when there is voltage at the output terminal, bright, otherwise extinguishedUsage:1. Use as a lift voltage module with over-current protection;2. Use as a battery charger;3. Use as a high-power LED constant current driver moduleParameters:Input Voltage: 5.5-30VOutput Voltage: 0.5-30VOutput Current: Up to 4AOutput Power: 35WVoltage Display Resolution: 0.01VCurrent Display Resolution: 0.001AConversion Efficiency: Approx. 88%Soft StartInput Reverse Connection ProtectionOutputBackflow PreventionShort Circuit ProtectionTemperature Protection: 100℃Power Protection: 35WOvercurrent Protection: 4AOperating Frequency: 180KHzFan Rotation Conditions: Size: 72*59*32mm Mounting Holes: 3mm DiameterWeight: 81gAttention:1. Very high power with load module startup soft start may fail2. Input voltage 5V, can also be achieved lift voltage, but the voltage and current measurement is not accurate; below 4.7V, under-voltage protection 3.When current greater than 3A or power greater than 20W or temperature greater than 40 ℃, the fan will start automatically4. Input IN- must not be shorted to output OUT- otherwise the constant current function is disabled5. Make sure that the power of the power supply is always greater than the power required by the output load6. If you want full load output, the input voltage should be more than 8V, when the input voltage is 5V, the output power is about 15W, the voltage and current meter is invalid. Module current value of up to 4A, the premise is limited by the maximum output power, such as output 17V, the current should not be greater than 2A7. module with output short-circuit protection, short-circuit protection module automatically shut down the output, to the module can be restored by re-powering, if your power supply does not have output current limiting protection, it is recommended that the front of the module input series of fuses to improve the safety coefficient8. Module has input undervoltage protection function, the default is about 4.7V, lower than this value, the module will automatically disconnect the output, to the module can be restored by re-powering (pay attention to the voltage at the module port, when the input current is relatively large, do not ignore the partial voltage on the input wires)Package Content:1 * Boost Buck Converter

Price: 24.41 USD

Location: Ooltewah, Tennessee

End Time: 2024-09-17T08:00:54.000Z

Shipping Cost: 0 USD